锻压技术

基于UG的消失模泡沫模样数控刀路优化算法的研究

英文标题：Research on foam EPC optimization of NC tool path based on UG

作者：吕竹清王华昌李志刚

单位：华中科技大学

关键词：数控编程刀路优化消失模 UG/CAM

分类号：TG386

出版年,卷(期):页码：2010,35(6):137-141

摘要：

消失模泡沫模样的数控加工程序复杂，UG数控编程系统在数控刀路排列方面提供的算法不能根据工件的具体情况很好地控制抬刀空行程，常常导致跳刀现象的发生，不符合实际加工制造的工艺原则。利用产生式系统原理设计了刀路优化程序，制定了各种情况的刀路优化规则集，提出了调整刀路分组排列效果的等高面阀值ΔZ等4个刀路优化基本概念，解决了消失模泡沫模样数控程序的刀路优化难题，实现了数控编程全自动化。实践证明,该算法可行并具有抬刀空行程短、工艺合理、效率高等优点。

The NC program of foam EPC is complicate. The algorithm provided by UG NC programming system in the CNC tool path arrangement can not control cutter lifting idle path very well in all kinds of concrete conditions. So that it often leads to tool jumping phenomenon，and can not meet the principles of the actual manufacturing process. Principles of production system were used to design the tool path optimization procedures, a variety of circumstances rule set of tool path optimization was established, four basic concepts of tool path optimization were proposed in which the same-height threshold value ΔZ could adjust the affection of tool path arrangement，and the key problem was encountered in NC auto programming of the foam EPC was solved. The full automation of NC programming was also realized. The results show that the algorithm is doable with the advantages of short knife carrying idle path, reasonable process and high efficiency.

基金项目：

参考文献：

［1］时宇杰,张长胜.模具CAD/CAM软件的应用与开发现状[J].福建电脑,2009,（3）:47-48.
［2］孙全平,廖文和,盛亮.复杂多曲面高速铣3轴精加工刀轨优化算法[J].计算机辅助设计与图形学学报,2005,17(3):486-490.
［3］严思杰,周云飞,赖喜德,等.多轴加工刀轨最优行距计算方法研究[J].航空精密制造技术,2006,42(5):35-38.
［4］孙全平,廖文和,何宁.叶轮流道5轴高速铣加工刀轨计算[J].南京航空航天大学学报,2006,38(5):639-643.
［5］安鲁陵，周来水，庄海军，等.行腔高速铣削导轨生成算法研究[J].计算机辅助设计与图形学学报,2004,16(9):1202-1206.
［6］姜晓峰,周来水，周儒荣.复杂多曲面3轴粗加工刀轨优化的计算方法[J].中国机械工程,1999,10(10):1182-1184.
［7］刘伟军,张嘉易.层切法模具粗加工中自适应刀轨规划方法[J].计算机集成制造系统，2005,11（9）：1296-1300.
［8］Morrishigek, Takeuchiy. 5-axis control rough cutting of an Inpeller with efficiency and accuracy[A]. Proceedings of the 1997 IEEE International Conference on Robotics and Automation[C]. Albuquerque, NM, USA: IEEE, 1997.
［9］郑贞平,张小红,伊伟明.数控加工典型范例教程[M].北京：电子工业出版社,2007.
［10］展迪优.数控加工教程[M].北京：机械工业出版社,2009.
［11］赵葛霄.数控编程中的工艺规划问题研究[J].机械工程师，2000,(12)：13-15.

服务与反馈：

【文章下载】【加入收藏】