锻压技术

管内液体压力对液压冲孔的影响

英文标题：Influence of hydro-pressure inside tube on hydropiercing

作者：苏海波刘钢陈新平齐军

关键词：管材液压成形液压冲孔

分类号：TG316.1+5

出版年,卷(期):页码：2011,36(3):19-23

摘要：

设计加工了管材液压冲孔试验装置，在该装置上开展了液压冲孔工艺试验。试验结果表明：液压冲孔过程中，管内液体压力越大，冲孔结束后塌陷尺寸越小，提高冲孔过程中管内液体压力，能够有效减小冲孔后的塌陷尺寸；冲孔过程中管内液体压力越大，冲孔结束后断口光亮带所占比例越高，断口质量越好；冲孔结束后的塌陷发生在一定区域内，长度对塌陷发展具有一定限制作用，长度越长，塌陷深度变化越慢，塌陷影响区域越大。

An experiment instrument of hydropiercing was designed and manufactured. At the same time, the technology experiment was conducted successfully. The experimental result shows that collapse decreases with the increasing of pressure in the tube during hydropiercing process. A higher pressure is very useful for hydropiercing and it can reduce the size of collapse and improve the quality of cross-section. With higher pressure during the piercing process, a better quality cross-section can be got. In addition, the collapse only happens in a given area, and the length of material will also impact the collapse tendency. When the tube length changes in some range, the collapse will change slowly with the increasing of the tube length.

基金项目：

参考文献：

［1］王强. 内高压成形工艺与设备的新进展\[J\].锻压装备与制造技术,2003,38(1):2025.
［2］苑世剑.我国内高压成形技术现状与进展[J].锻压技术,2004,29(3):1-6.
［3］Dohmann F, Hartl C. Liquid bulge forming as a flexible production method[J]. Journal of Material Processing Technology,1994,45: 377-382.
［4］Srinivasan T M, Shaw J R, Thompson K. Tubular hydroforming: Correlation of experimental and simulation results[J]. SAE Technical Paper，No.980448, 1998:22-28.
［5］Dohmann F. Introduction to the processes of hydroforming[J]. Hydroforming of Tubes, Extrusions and Sheet Metals, 2000,(1): 1-21.
［6］Hartl Ch. Theoretical fundamentals of hydroforming[A]. 2nd International Conference on Hydroforming[C].Stuttgart, 1999.
［7］Asnai N, Skogsgrdh A. Theoretical and experimental analysis of atroke-conntroiled tube hydroforming[J]. Journal of Material Science and Engineering,2000,27 (9): 95-110.
［8］Koc M, Altan T. Prediction of forming limits and parameters in the tube hydroforming process[J]. International Journal of Machine Tools & Manufacture,2002, 42: 123-138,
［9］Manabe K, Amino M. Effects of process parameters and material properties on deformation process in tube hydroforming[J]. Journal of Materials Processing Technology,2002, 12(3): 285-291.
［10］韩聪, 苑世剑, 苏海波, 等. 液压冲孔数值模拟[J ].中国有色金属学报, 2006,16(1):22-28.

服务与反馈：

【本网站尚未开通全文下载服务】【加入收藏】