锻压技术

三辊行星轧制中轧辊与轧件接触区分布

英文标题：Contact region distribution between roller and workpiece during three-roll planetary rolling

作者：刘海张士宏程大勇

单位：中国科学院

分类号：TG339

出版年,卷(期):页码：2011,36(3):46-49

摘要：

三辊行星轧制中，轧辊轧件接触区的分布是轧制力和轧制功率计算的基础，是轧辊外轮廓设计的重要依据。研究结合了实际轧制过程中轧辊和轧件的运动特点，引入相应的约束条件，给出接触区分布的解析表达式；在给定轧制工艺参数下，数值分析计算出接触区具体的分布情况。该方法避开了轧辊轧件线接触的假设，可给出接触区分布情况。结果显示，该分布不仅要受到行星轮公转半径、偏转角和倾斜角的影响，还与轧件进给速度和轧辊转速有关。

During the three-roll planetary rolling, contact region distribution between the roller and workpiece is not only the basis of calculations of rolling force and power, but also the major basis of roll profile design. By considering the constraint conditions based on the movement characteristics of roller and workpiece in the rolling process, the analytical results of contact region distribution were obtained. Counting on the given parameters of rolling process, the specific distribution of contact region was calculated with numerical analysis. As the hypothesis of line contact between the roller and workpiece was not taken in current research, a distribution of contact region was given. The results show that the distribution is not only affected by the rotation radius of planetary gear system, offset angle and inclined angle, but also concerned with the feeding speed of workpiece and the roll speed.

基金项目：

参考文献：

［1］Shih Chih-Kang, Hung Chinghua. Experimental and numerical analyses on three-roll planetary rolling process[J]. Journal of Materials Processing Technology,2003,142: 702-709.
［2］Shih Chih-Kang, Hung Chinghua, Hsu Ray-Quen. The finite element analysis on planetary rolling process[J]. Journal of Materials Processing Technology, 2001,113: 115-123.
［3］张海兵,倪元相,刘晓星.行星斜轧的轧件变形区微分几何模型[J].重型机械,2007,(3):49-52.
［4］张海兵,刘晓星,倪元相.行星斜轧中轧辊与轧件的几何关系分析[J].重型机械,2007,(5):37-41.
［5］李冰,杨志,刘化民,等.三辊行星轧制运动和管坯变形规律的仿真模拟[J].塑性工程学报,2005,12 (5):70-73.
［6］傅文祖.三辊行星斜轧机及其轧制力计算[J].上海有色金属,1985,(2):13-20.
［7］黄勇,张海兵.三辊行星轧机轧制力计算[J].重型机械,2008,(2):27-31.
［8］岳峰丽,刘劲松.TP2铜管坯三辊行星旋轧变形规律模拟[J].锻压技术,2009,34 (2):43-45.
［9］张士宏,王炳德,朱士光,等.一种新型三辊旋轧试验机的设计[J].锻压装备与制造技术,2007,42(2):40-42.
［10］董顺德,王世中,段广超.行星轧机的运动形式和轧管组织变化[J].锻压装备与制造技术,2004,39(4):30-32.

服务与反馈：

【文章下载】【加入收藏】