锻压技术

双锥形件同时旋压成形的应力应变场有限元分析

英文标题：FEM analysis of stress and strain fields for double conical part spinning

作者：王鸿基刘全坤王其善韩英

关键词：双锥形件旋压有限元应力场应变场

分类号：TG306

出版年,卷(期):页码：2011,36(4):152-158

摘要：

提出了双锥形件旋压加工的一种新方法。基于ABAQUS/Explicit平台建立了双锥形件同时旋压成形三维有限元模型，结合金属塑性变形原理和旋压工艺的特点，确定了旋轮成形面角度、旋轮径向进给速度、主轴转速、摩擦系数等工艺参数的取值范围；进而获得了双锥形件同时旋压成形过程中应力场、应变场的分布特点，为双锥形件同时旋压成形后续道次的分析研究以及工艺参数的优化提供了依据。

A new way of spinning for processing double conical parts was proposed and a 3D FE model of spinning for double conical parts was established based on the ABAQUS/Explicit platform. Combined with the metal plastic forming principle and the characteristic of spinning, the range of technical parameters, such as the angle of the roller forming surface, the radial feed speed of the roller, the spindle speed and the friction coefficient were determined. The distribution features of stress and strain fields of the double conical part spinning were obtained during the research,which provides the basis for studying the followup pass spinning of double conical parts and optimizing the technical parameters.

基金项目：

华中科技大学材料成形与模具技术国家重点实验室基金资助项目（0907）；科技部中小企业技术创新基金资助项目（09c26213401462）

参考文献：

[1] Wong C C, Dean T A, Lin J.A review of spinning,shear forming and flow forming processes[J].International Journal of Machine Tools & Manufacture,2003,43:1419-1435.

[2] 徐银丽,詹梅,杨合，等.锥形件变薄旋压回弹的三维有限元分析[J].材料科学与工艺,2008,16(2):167-171.

[3] 周强,詹梅,杨合，等.带横向内筋锥形件旋压应力应变场的有限元分析[J].塑性工程学报,2007,14(3):49-53.

[4] 夏琴香,张帅斌,吴小瑜，等.锥形件单道次拉深旋压成形的数值模拟及试验研究[J].锻压技术,2010,35(1):44-48.

[5] 郝继东,刑照斌,秦升学，等.锥形件三维变薄旋压数值模拟[J].锻压技术,2010,35(3):80-83.

[6] 庄茁.ABAQUS/Standard有限元软件入门指南[M].北京:清华大学出版社,1998.

[7] 赵腾伦.ABAQUS 6.6在机械工程中的应用[M].北京:中国水利水电出版社,2007.

[8] 马明娟.大型复杂薄壁壳体多道次旋压成形机理及规律的三维有限元分析[D].西安:西北工业大学,2007.

[9] 田辉.筒形件旋压成形有限元模拟及工艺分析[D].大连:大连理工大学,2010.

[10] 周强.突变壁厚锥形件强力旋压成形有限元模拟和试验研究[D].西安:西北工业大学,2007.

服务与反馈：

【文章下载】【加入收藏】