锻压技术

某重卡前轴工字梁辊锻成形工艺设计及优化

英文标题：Design and optimization of Ibeam precision roll forging process for heavy truck front axle

作者：张黎文琍夏江梅

分类号：TG316

出版年,卷(期):页码：2012,37(2):160-162

摘要：

针对某重卡前轴成形辊锻模锻复合工艺中的典型缺陷——工字梁部位充不满展开研究。介绍了重卡前轴工字梁在辊锻成形工艺中各道次的孔型设计，通过Defoem3D建立了有限元数值模拟分析模型，研究了第3道次预辊锻成形中工字梁壁厚和第3、4道次中摩擦因子对模具型腔填充率的影响规律，最后完成了重卡前轴工字梁在辊锻成形中的优化设计。优化后的模拟结果表明，工字梁成形良好、填充饱满，满足图纸设计要求。

The under-filling defect of the I-beam, one of the typical defects on a heavy truck front axle in the precision roll forging process and die forging process was studied. Firstly, the design of the precision roll forging process for the I-beam of the front axle was described. Then, the finite element numerical simulation analysis model was established with Deform-3D, and the influence of the thickness on the I-beam in the third step and the friction factor in the third and fourth step on filling percent of the die cavity was analyzed. Lastly, optimization for the precision roll forging process of the heavy truck front axle was finished. The optimized simulation results show that the I-beam forms well and can be filled fully to meet the requirements of design drawings.

基金项目：

参考文献：

［1］陈建全.夏巨湛.张金刚，等. 前轴精密成形辊锻及精密模锻工艺与模具CAD[J].锻压技术,2002,27(6):1-3.
［2］郑淼, 苟建华. A680前轴精密辊锻工艺及辊锻工装的设计与改进[J]. 机械工人：压力加工, 2007, (7): 72-74.
［3］柳豪, 周杰, 万煦义, 等. 重卡前轴7030成形辊锻工艺设计与优化[A]. 第十一届全国塑性工程学术年会
［C］.长沙，2009.
［4］柳豪, 周杰, 万煦义, 等. 美国某牌号重卡前轴成形辊锻工艺优化[A]. 第四届西南锻压会议技术论坛论文集
［C］.重庆，2011.
［5］夏巨谌. 中国模具工程大典：第5卷[M]. 北京：电子工业出版社, 2007.

服务与反馈：

【文章下载】【加入收藏】