锻压技术

齿轮轴齿形轧制成形的齿形分析

英文标题：Teeth shape analysis of shaft teeth formed by rolling

作者：于杰王宝雨

单位：北京科技大学

分类号：TG335.19

出版年,卷(期):页码：2012,37(1):76-80

摘要：

用楔横轧机轧制齿轮轴上的齿形时，对影响齿形成形的各种因素进行分析是提高齿形成形质量的关键。基于图像测量原理对齿形进行特征提取，获得齿形离散数据，然后运用数值计算方法最小二乘法把齿形离散数据拟合成齿形曲线，求解出基圆圆心，绘制出齿形。通过数学建模和实验，分析了模具齿形、齿坯相对模具的位置、坯料的初始形状以及轧制温度对成形齿形的影响。结果表明：模具齿形决定轧制成形的齿形，它们的齿廓是一对共轭曲线的关系；坯料相对模具的位置决定齿形的正负变位状态；通过改变坯料的初始形状可以补偿端面附近齿形下凹的成形缺陷；降低轧制温度可以减弱齿顶“拉尖”现象。

As for the teeth on shaft formed by wedge cross rolling,analyzing factors which affect teeth forming is the key to improve the forming quality.Based on the image measurement principle,the teeth characteristics were extracted and data of teeth was obtained.Then a curve was fitted with the teeth data by the method of least square,the workpiece centre can be calculated and teeth contour can be drawn.By analyzing mathematical model and experiments,the conclusions are that the relationship between die tooth profile and workpiece profile is conjugate curve,the position of workpiece makes teeth positive correction or negative,changing workpiece shape can compensate the defect of concave nearly at end area,and decreasing temperature can reduce defect of tooth end tip.

基金项目：

国家自然科学基金资助项目(50975023); 国家科技重大专项资助项目(2009ZX04014-074); 北京自然科学基金资助项目(3082013)

参考文献：

［1］胡正寰，张康生，王宝雨，等.楔横轧理论与应用[M].北京：冶金工业出版社，1996.
［2］Pater Z B. A study of cross wedge rolling process[J].Journal of Materials Processing Technology，1998,8081:370-375.
［3］Pater Z B.Numerical simulation of the cross wedge rolling process including upsetting[J].Journal of Materials Processing Technology,1999,9293:468-473.
［4］Urankar,Lovell M,Morrow C.Establishment of failure conditions for the cross-wedge rolling of hollow shafts[J].Journal of Materials Processing Technology，2006,177:545-549.
［5］刘晋平，王宝雨，张康生，等.辊式楔横轧楔入轧制几何分析[J].塑性工程学报,2001,8(1):55-58.
［6］Dong Yao-min,Lovell M,Kavch Tagavi. Analysis of interfacial slip in cross-wedge rolling:an experimentally verified finite-element model[J].Journal of Materials Processing Technology，1998,8081:273-281.
［7］孙桓，陈作模.机械原理[M].北京：高等教育出版社,2001.
［8］夏德深，付德胜.计算机图像处理及应用[M].南京：东南大学出版社,2004.
［9］付昆昆，郑柏林，李鑫.基于Matlab的图像曲线提取方法[J].汕头大学学报：自然科学版,2010,25(2):51-55.
［10］李瑛，刘苏醒，韩炎.基于图像变换的图像测量系统标定[J].传感器与微系统,2006,5(3):77-81.
［11］高新波，池峰，姬红兵.一种图像测量中标定参照物的快速定位方法[J].计算机与应用,2003,23(3):15-17.
［12］刘钦圣，张晓丹，王兵团.数值计算方法教程[M].北京：冶金工业出版社,1998.

服务与反馈：

【文章下载】【加入收藏】