锻压技术

单点渐进成形时工艺参数对成形能力的影响

英文标题：Effect of process parameters on formability in single point incremental forming

作者：陶龙王进姜虎森

单位：青岛理工大学

分类号：TG386.41

出版年,卷(期):页码：2012,37(3):19-22

摘要：

采用2A12铝合金作为试验材料，以成形极限角作为衡量工艺参数对板料单点渐进成形的成形能力影响的标准。试验中研究对成形能力影响的工艺参数有：工具头半径、加工步长、进给速度和主轴转速。采用正交试验法对板料在单点渐进成形中的成形极限进行研究。试验结果表明，对板料单点渐进成形的成形能力影响最大的因素是加工步长，其次是进给速度、主轴转速和工具头半径。

2A12 sheet metal was employed as the experimental material, used maximum wall angle as a formability representative, the variation in the process parameters affecting the formability in single point incremental forming was investigated. The process parameters affecting the formability were studied, such as tool radius, step size, federate and spindle speed. Sheet metal forming limit in single\|point incremental forming was studied based on orthogonal design. The experiment results show that step size in the forming process has a considerable influence, and the others in sequence are the feeding rate, spindle speed and tool radius.

基金项目：

山东省高等学校科技计划资助项目（J10LD13）

参考文献：

［1］周六如, 肖祥芷, 莫健华. 板料零件数控渐进成形工艺研究[J]. 塑性工程学报, 2003,(4):27-29.
［2］Hussain G, Gao L, Dar N U. A comparative study on the forming limits of an aluminum sheet\|metal in negative incremental forming[J]. Journal of Materials Processing Technology, 2006,186:45-53.
［3］Leach D,Green A J,Bramley A N, A new incremental forming process for small batch and prototype parts[A]. Proceedings of the Ninth International Conference on Sheet Metal[C]. Leuven, 2001.
［4］Matsubara. A computer numerically controlled dieless incremental forming of a sheet metal proceedings of the institution of mechanical engineers[J]. Journal of Engineering Manufacture, 2001,215(7):959-966.
［5］Kim T J, Yang D Y. Improvement of formability for the incremental sheet metal forming process[J]. International Journal of Mechanical Sciences, 2000, (42):1271-1286.
［6］Young D. Formability in computer numerically controlled single point incremental forming[D]. Canada:Queens University, 2003.
［7］Wei H Y,Gao L,Li S G. Investigation on thickness distribution of bulge type incrementally formed sheet metal part with irregular shapes[A].Proceedings of the IMCC[C]. China, 2004.
［8］李云雁，胡传荣.试验设计与数据处理[M]. 北京:化学工业出版社，2008.
［9］Shim M S, Park J J. The formability of aluminum sheet in incremental forming[J]. Journal of Materials Processing Technology, 2001, 113:654-658.
［10］Jeswiet J, Micari F, Hirt G, et al. Asymmetric single point incremental forming of sheet metal[J]. Annals of CIRP, 2005, 54(2):623-650.
［11］Kim Y H, Park J J. Effect of process parameters on formability in incremental forming of sheet metal[J]. Journal of Materials Processing Technology, 2002,130131:42-46.

服务与反馈：

【文章下载】【加入收藏】