锻压技术

斜凸缘锥形件充液拉深中预胀作用研究

英文标题：pre-bulging during hydromechanical deep drawing for conical cups with inclined flange

作者：王会廷彭飞邰阿媛章静闫军

单位：安徽工业大学

关键词：板料成形充液拉深铝合金

分类号：TG386

出版年,卷(期):页码：2012,37(3):31-35

摘要：

采用有限元结合实验对斜凸缘铝合金锥形件充液拉深中预胀作用进行研究。研究结果表明：在斜凸缘锥形件的成形中，凸模底面和板料在预胀以及拉深初始阶段的接触不同步，是造成零件锥壁底部产生壁厚明显减薄痕迹的原因；预胀时凸模的位置对凸模圆角处零件壁厚分布有一定的影响，并且对低端锥壁圆角处的影响比对高端锥壁圆角的影响更为显著；凸模先下行一定位移，然后配合合适的预胀加载路线可以改善此处壁厚的减薄，减轻壁厚减薄留下的明显痕迹。

The effects of pre-bulging during hydromechanical deep drawing of conical cups with inclined flange were investigated using experiments coupled with FE method. The result shows that the reason for obviously thinning at the bottom of the formed parst is loss of synchronization during the punch bottom touching the blank; the punch position in the pre-bulging stage affects the thickness distribution of the wall at the punch cornor. An appropriate pre-buging loading path along with right position of the punch during prebulging process can contribute to reduce the wall thinning rate, and reduce the traces caused by wall thinning at the bottom of the formed parts.

基金项目：

参考文献：

［1］于忠奇, 赵亦希, 林忠钦. 汽车用铝合金板拉深性能评估参数[J]. 中国有色金属学报, 2004,14(10): 1689-1693.
［2］Zhang S H, Wang Z R, Xu Y. Recent developments in sheet hydroforming technology[J]. Journal of Materials Processing Technology, 2004, 151: 237-241.
［3］Kang D C, Chen Y, Xu Y C. Hydromechanical deep drawing of superalloy cups[J]. Journal of Materials Processing Technology, 2005, 166: 243-246.
［4］林忠钦, 于忠奇, 孙成智, 等. 变压边力条件下铝合金板的成形窗口[J]. 中国有色金属学报, 2005, 15(8): 1162-1166.
［5］Huiting Wang, Lin Gao, Minghe Chen. Hydrodynamic deep drawing process assisted by radial pressure with inward flowing liquid [J]. International Journal of Mechanical Sciences, 2011, 53: 793-799.
［6］Nakamura K, Nakagawa T, Amino H. Various application of hydraulic counter pressure deep drawing[J]. Journal of Materials Processing Technology, 1997, 71(1): 160-167.
［7］唐井林, 聂绍珉. 充液成形装置及锥形件充液拉深成形研究[J]. 塑性工程学报, 2001, 8(3): 32-34.
［8］Lang L H, Danckert J, Nielsen K B,et al. Investigation into the forming of a complex cup locally constrained by a round die based on an innovative hydromechanical deep drawing method[J]. Journal of Material Processing Technology, 2005, 167: 191-200.
［9］朗利辉, Danckert J, Nielsen K B. 板液压成形及无模充液拉深技术[J]. 塑性工程学报, 2002, 9(4): 29-34.
［10］Geiger M, Vahl M, Novotny S,et al. Process strategies for the sheet metal hydroforming of lightweight components[A]. Proceedings of the Institution of Mechanical Engineers[C]. London, 2001.
［11］秦伟. 板材充液拉深的数值模拟与试验研究[D]. 南京：南京航空航天大学，2011.
［12］王会廷. 液体内向流动板材液压成形技术研究[D]. 南京：南京航空航天大学，2010.
［13］Lang Lihui, Danckert J, Nielsen K B. Investigation into hydrodynamic deep drawing assisted by radial pressure part Ⅰ: Experimental observations of the forming process of aluminum alloy[J]. Journal of Materials Processing Technology, 2004, 148:119-131.
［14］Lang Lihui, Danckert J, Nielsen K B. Investigation into hydrodynamic deep drawing assisted by radial pressure partⅡ: Numerical analysis of the drawing mechanism and the process parameters[J]. Journal of Materials Processing Technology, 2005, 166:150-161

服务与反馈：

【文章下载】【加入收藏】