锻压技术

板料激光校形技术

英文标题：Laser correction of sheet metal technology

作者：王秀凤

单位：北京航空航天大学

关键词：板料激光校形残余应力热应力

分类号：TN249;TG386.3+1

出版年,卷(期):页码：2012,37(6):23-25

摘要：

介绍了一种利用激光作为热源使金属板料在无模具下发生热塑性变形的新的校形加工方法。综述了激光校形技术在国内外研究的现状，结合在薄板成形和激光热加工方面的研究积累，提出了可能的应用领域，并做了可行性试验。分析了激光校形技术的影响因素，明确了今后的研究方向。

A new correction process which can make sheet metals thermoplastic deformation without dies through the use of a laser as a heat source was described. The summary of the present situation at home and abroad was given in the laser correction. The possible application was suggested on the basis of current study status and the research that had been done on the sheet metal forming and laser heat processing. The feasible experiment was done. The factors influencing on laser correction were analyzed. The research direction was discussed.

基金项目：

参考文献：

［1］陈光南，王秀凤，罗耕星，等.压弯、点热源复合成形方法[P]. 中国专利号：ZL2007101180957,20090311.
［2］Geiger M. Synergy of laser material processing and metal forming[J]. Annals of CIRP, 1994, 43(2):563-570.
［3］宋文荣，何惠阳，郭凡林. 应用激光技术进行继电器簧片气隙的校正[J]. 光学精密工程，2006，14，(3)：463-468.
［4］夏寒剑. 不锈钢薄板激光加热矫形技术的研究[D]. 洽尔滨：哈尔滨工业大学，2007.
［5］Takashi Ueda，Eisuke Sentoku, Yoshihiro Wakimura, et al. Flattening of sheet metal by laser forming[J]. Optics and Lasers in Engineering,2009,(47):1097-1102.
［6］Takashi Ueda，Yoshihiro Wakimura，Tatsuaki Furumoto, et al. Experimental investigation on laser flattening of sheet metal[J]. Optics and Lasers in Engineering,2011,(49):137-144.
［7］Shim H B，Kim K H. Springback correction of stamped, curved U-channel part by laser bending [J]. Engineering Manufacture, Proceeding of IMechE,2012,(225):367-376.
［8］王秀凤，胡世光，陈光南. 板料激光成形技术[J]. 锻压技术，1998,20(12)：32-34, 55.
［9］王秀彦，安国平，林道盛，等. 激光模具表面强化的应用研究[J]. 锻压机械，2000,35(4)：3-6.

服务与反馈：

【文章下载】【加入收藏】