锻压技术

矩形直齿轮热锻工艺有限元模拟

英文标题：FE simulation of hot forging process for rectangular spur gear

作者：只悦胜胡成亮赵震李世龙张海英

关键词：矩形直齿轮热锻有限元模拟

分类号：TG316

出版年,卷(期):页码：2013,38(2):6-10

摘要：

针对大尺寸矩形直齿轮，提出了镦粗预锻终锻3工序“一火”连续锻造的工艺方案。利用有限元软件Deform-3D建立矩形直齿轮热锻有限元模型，并模拟其成形过程。根据模拟结果探讨成形过程中的温度场、等效应变场、材料流动情况及成形载荷的变化规律。在6.3 MN高能螺旋压力机上成功试制出矩形直齿轮锻件，工艺试验与模拟结果具有较好的一致性，锻件形状满足设计要求、无折叠缺陷，证明该工艺方案切实可行。

The process plan of upsetting-pre-forging-final forging was presented for the rectangular spur gear with large dimension. The FE model of hot forging process was constructed with the finite simulation software of Deform-3D, and the whole forging process was simulated. Then the changing rules of temperature distribution, effective strain field, velocity field of material and forging load in the process were investigated. Finally, the spur gear forging part was forged on a 6.3 MN high energy screw press and a good agreement was found between the simulation and experimental results. The forging parts with satisfied dimension and without any folding defect were obtained, which show that the multi-stage hot forging process is feasible.

基金项目：

国家科技重大专项资助项目(精密塑性成形技术与装备创新能力平台建设2011ZX04016-051)

参考文献：

［1］Dean T A. The net-shape forming of gears[J]. Materials and Design, 2000, 21(4):271-278.
［2］张发廷. 汽车后桥从动齿轮闭式模锻工艺研究[J]. 锻压技术，2008, 33(4):16-18.
［3］王广春，赵国群，夏世升，等. 直齿轮精锻成形新工艺及试验研究[J]. 机械工程学报，2005, 41(2):123-126,131.
［4］胡成亮，刘全坤，刘永熙，等. 齿轮锻造金属流动规律分析及工艺改进[J]. 机械工程学报，2008, 44(5): 186-190.
［5］王岗超，薛克敏，许锋，等. 齿腔分流法冷精锻大模数圆柱直齿轮[J]. 塑性工程学报，2010, 17(3):18-21.
［6］Cai J, Dean T A, Hu Z M. Alternative die designs in net-shape forging of gears[J]. Journal of Materials Processing Technology, 2004, 150(12): 48-55.
［7］仇明侠，张治民，张宝红，等. 齿轮温挤精密成形工艺数值模拟[J]. 锻压技术，2005, 30(3):53-55.
［8］陈晓伟. 圆柱直齿轮温精锻成形关键技术研究[D]. 太原：太原理工大学, 2011.
［9］张毅峰，王雷刚，吴君三，等. 大型齿轮毛坯锻造及热处理工艺改进[J]. 锻压技术，2010, 35(6):6-11.
［10］胡建军，李小平. Deform3D塑性成形CAE应用教程[M]. 北京：北京大学出版社，2011.

服务与反馈：

【文章下载】【加入收藏】