锻压技术

大型水压机阀芯驱动系统凸轮升程曲线设计

英文标题：Design of cam lifting profiles used to drive spool system in large hydraulic press

作者：陈玲谭建平杨俊陈晖

单位：中南大学

分类号：TG315

出版年,卷(期):页码：2013,38(2):85-89

摘要：

针对大型水压机阀芯驱动系统中凸轮顶杆机构所受侧向力巨大和瞬变的特点，提出一种适合于该特点的凸轮轮廓曲线设计方法，该方法通过寻找最优的圆弧曲线轮廓使凸轮的压力角在阀芯开启力最大时具有较小的值。将该方法应用于300MN模锻水压机阀芯驱动系统的凸轮设计，通过建立阀芯驱动系统的模型，对比了最优圆弧凸轮和直线轮廓凸轮对系统动态特性的影响，结果表明:最优圆弧凸轮阀芯驱动系统的液压缸驱动降低了22%，阀芯开启力下降了5kN，开启的速度更加平稳，设备运行更加稳定，使用寿命得到了极大的提高。

Considering the huge and transient lateral force that the cam followers institutions suffered in the spool drive system of large hydraulic press, a new cam profile curve design method was presented. This method tries to find the optimal arc curved contour to ensure a smaller value of the pressure angle of cam when the opening force of the spool is the maximum. The method was applied in the cam design of the spool drive system in 300 MN forging hydraulic press. The effects on system dynamics of the optimal arc cam and straight line contour cam were compared through the establishment of the spool drive system model. The results show that the drives of hydraulic cylinder in the spool driving system with the optimal arc cam can be reduced by 22%, the opening force declines 5 kN, the opening speed is smoother, the operation state is more stable, and the service life of the equipment is greatly prolonged.

基金项目：

国家高技术研究发展计划（863）专项经费资助项目（2007AA04Z417）;“高档数控机床与基础制造装备”国家科技重大专项资助项目（2009ZX04005-031）;流体动力与机电系统国家重点实验室开发基金资助项目（GZKF-201023）

参考文献：

［1］黄长征.300MN模锻水压机动梁驱动系统动态响应特性及速度控制研究[D].长沙：中南大学，2007.
［2］朱钒，张志，张道富,等.国内外液压机技术现状及发展趋势[J].机床与液压，2000，(1):6-7.
［3］高俊峰.我国快锻液压机的发展与现状[J].锻压技术,2008，33(6):1-5.
［4］窦丽娟.65MN自由锻压机液压系统的设计与仿真[D].秦皇岛：燕山大学,2011.
［5］谭建平，黄长征，周俊峰,等.300 MN模锻水压机操纵系统改造[J].锻压技术，2007，31(3):80-84.
［6］Do-Joong Kim, Vu-Thinh Nguyen. Flexible cam profile synthesis method using smoothing spline curves[J].Mech. Mach. Theory,2007，(42):825-838.
［7］Chang-Jun Lin, Hua Qiu a, Zi-Ye Li,et al. A universal optimal approach to cam curve design and its applications[J].Mech. Mach. Theory,2005，(40):669-692.
［8］Domenico Mundo Gianluca Gatti. On the direct control of follower vibrations in cam-follower mechanisms[J].Mech. Mach. Theory,2010，(45):23-35.
［9］葛杨，张家泰，谭定中.新型舰炮供弹凸轮轮廓线设计的研究[J].哈尔滨工程大学学报,2004,(6):769-772,798.
［10］李俊源.用五次PH曲线设计圆盘凸轮轮廓线的研究[J].浙江工业大学学报,2008,(1):48-51.
［11］JungFa Hsieh.Design and analysis of cams with three circular-arc profiles[J].Mech.Mach.Theory,2010，(45):955-965.
［12］陈晖，谭建平.大型模锻水压机高压大流量水阀开启力特性[J].中南大学学报：自然科学版,2012,(8):2993-2999.

服务与反馈：

【文章下载】【加入收藏】