锻压技术

22MnB5高强钢板热成形淬火时间对回弹的影响规律

英文标题：Study of quenching-time effect to springback for 22MnB5 high strength steel hot forming process

作者：肖海峰王敏张春张宇

分类号：TG386

出版年,卷(期):页码：2013,38(3):29-33

摘要：

以22MnB5高强钢板力学及热物理性能的实验数据为基础，运用PAMSTAMP软件对22MnB5高强钢板U形梁的热冲压成形过程、成形后的淬火冷却工艺以及回弹分析的全部过程进行了有限元模拟，并根据模拟参数进行了物理实验验证，找出了22MnB5钢板U形梁热冲压成形后的淬火时间对回弹影响的基本规律。实验分析结果表明：在特定时间内，随着淬火时间的增加，板料回弹量有所降低；当淬火时间继续延长时，板料回弹值不再发生显著变化，最佳淬火时间为20 s。实验分析结果为高强钢板热冲压工艺的实际生产运用提供了良好的实验依据。

On the basis of experimental data of mechanical and thermal physical property of 22MnB5 high-strength steel, the numerical simulations of the whole hot stamping process of hot stamping，quenching and springback were made with PAMSTAMP software. According to the simulation parameters, a physical experiment was done and the basic law of quenching-time on springback after hot stampting of 22MnB5 steel was found. Results show that in a particular period of time, as the quenching-time being increased, the springback will be reduced, while the quenching-time continues to be lengthened, the springback value will not be changed significantly, and the best quenching-time is 20 s. The research result provides a scientific basis for the high strength steel plate hot stamping technology research.

基金项目：

国家自然科学基金资助项目（51205116）

参考文献：

［1］胡星,李淑慧. 高强钢板压边力设计及敏感性分析[J]. 锻压技术，2007，32（6）:45-50.Hu X，Li S H,Design and sensitivity analysis of blank holding force for high strength steel sheet[J].Forming ＆ Stamping Technology,2007,32(6):45-50.
［2］田成达,李大永. DP780高强钢板动态变形力学行为研究[J].塑性工程学报，2008,15(6):48-53.Tian C D,Li D C.Research on the dynamic deformation behavior of the DP780 advanced high strength steel[J].Journal of Plasticity Engineering , 2008,15(6):48-53.
［3］吴磊,李光耀,曹昭展. 高强钢材料性能对汽车零件扭曲回弹的影响[J].塑性工程学报， 2009,16(3):78-83.Wu L, Li G Y,Cao Z Z，The effect of material properties influenced on torsion springback of high strength steel parts[J].Journal of Plasticity Engineering , 2009,16(3):78-83.
［4］罗云华,王磊. 高强钢板冲压回弹影响因素研究[J]. 锻压技术，2009,34（1）：10-15.Luo Y H,Wang L.Research on influencing factors of springback during sheet metal stamping of high strength steel[J]. Forming ＆ Stamping Technology, 2009,34（1）：10-15.
［5］林建平,孙国华,朱巧红，等超高强钢板热成形板料温度的解析模型研究[J].锻压技术，2009,34(1):3439.Lin J P,Sun G H,Zhu Q H,et al.Research on analytical model of blank temperature prediction for hot sta-mping of ultra high strength steels[J]. Forming ＆ Stamping Technology, 2009,34（1）：34-39.
［6］雷华桢,王东方. 板料冲压成形及回弹数值模拟的应用与研究[J].锻压装备与制造技术, 2009,(2):40-45.Lei H Z,Wang D F. Numerical simulation for sheet stamping and spring\|back[J]. ChinaMetalforming EQuipment ＆ Manufacturing Technology,2009,(2):40-45.
［7］Bahloul R, Ben\| Elechi S B, Potiron A.Optimisation of springback predicted by experimental and numerical approach by using response surface methodology[J]. Journal of Materials Processing Technology,2006,(173):101-110.
［8］Ambikapathy Naganathan. Hot Stamping of Manganese Boron Steel[D]. Ohio：The Ohio State University,2010.
［9］Abdulhay B, Bourouga B,Dessain C. Experimental and theoretical study of thermal aspects of the hot stamping process[J]. Applied Thermal Enginnering,2011,(31):674-685.
［10］Hongsheng Liu ,Wei Liu,Jun Bao,et al. Numerical and experimental investigation into hot forming of ultra high strength steel sheet[J]. Journal of Materials Engineering and Performance, 2011,20:1-10.

服务与反馈：

【文章下载】【加入收藏】