锻压技术

基于ARM的伺服压力机网络控制系统设计

英文标题：Network control system design of servo press based on ARM

作者：李麟叶春生莫健华

单位：华中科技大学

分类号：TG315

出版年,卷(期):页码：2013,38(3):102-106

摘要：

根据曲柄压力机工艺特性和伺服电机工作原理，提出了基于ARM的网络控制系统，并对系统相关软件构成做了详细的设计和分析。嵌入式开发平台采用低成本、高性能的Tiny6410和STM32F103，人机界面使用Qt和OpenCV开发，系统可以在远程终端控制加工现场并监控产品质量，人机界面可实时显示当前电机运行状态。该设计可为后续实现无线网络控制提供实践参考。

According to the process characteristics of the crank press and the working principle of the servo motor, the ARM\|based network control system was put forward, and the software components were introduced. The low\|cost, high\|performance Tiny6410 and STM32F103 were adopted as the embedded development platform, the Qt and OpenCV were used to develop the HMI, the processing site in the remote terminal was controlled and the product quality was monitored using this system, the current motor running was displayed in HMI in real time. The design provides a practical reference for the follow\|up wireless network control.

基金项目：

参考文献：

［1］叶春生, 侯文杰, 张军伟，等. 数字伺服压力机控制系统的研究[J]. 锻压技术,2009, 34 (6) : 117-125.Ye C S, Hou W J, Zhang J W, et al. Research on control system of numerical crank servo press[J]. Forging & Stamping Technology, 2009，34(6):117-125.
［2］张军伟, 叶春生, 莫建华，等.基于ARM的FDM控制系统[J].仪表技术与传感器, 2011,(1):88-91.Zhang J W, Ye C S, Mo J H, et al. Control system of fused deposition modeling system based on ARM[J]. Instrument Technology and Sensor, 2011 ，(1):88-91.
［3］狄辉辉,李京华,刘景桑，等. 基于Qt／E的嵌入式实时曲线显示界面设计与实现[J].电子测量与技术，2011,34（12）：76-79.Di H H, Li J H, Liu J S, et al. Design and implementation of embedded real\|time curve display interface based on the Qt/E[J]. Electronic Measurement Technology, 2011, 34(12):76-79.
［4］Blanchette J,Summerfield M. C++GUI Programming with Qt4[M]. 2nd Edition. Beijing：Electronics Industry Press，2008.
［5］Balaji Srinivasan.A Firm Real\|Time System Implementation Using Commercial Off\|the\|Shelf Hardware and Free Software[D]. Kansas:University of Kansas，1998.
［6］汪成义，钟小磊，陈赜.ARM 嵌入式技术原理与应用[M].北京：北京航空航天大学出版社，2011.Wang C Y, Zhong X L, Chen Z, ARM Embedded Technology Principles and Applications[M]. Beijing: Beihang University Press, 2011.
［7］王浩南，刘益成．基于嵌入式Linux系统下的Qt开发[J].电脑开发与应用，2010，23(1)：11-13.Wang H N, Liu Y C. Development based Qt of embedded Linux[J]. Computer Development & Applications, 2010, 23 (1): 11-13.
［8］黄明，史玉升.基于ARM的光固化快速成形嵌入式网络控制系统研究[J].锻压装备与制造技术，2012,(2)：79-82.Huang M, Shi Y S. Embedded network control system of Stereolithography based on ARM[J]. Metalforming Equipment & Manufacturing Technology, 2012, (2): 79-82.
［9］蒋邦友，闫学文．基于嵌入式图形界面开发与应用[J]．工业控制计算机，2010，23(6)：29-30.Jiang B Y, Yan X W. Based on embedded graphical interface development & application[J]. Industrial Control Computer, 2010, 23(6): 29-30.
［10］蒋勇英.远程监控系统的设计[J].微计算机信息，2005,(10):87-91.Jiang Y Y. Design of the remote monitoring system[J]. Microcomputer Information, 2005,(10): 87-91.

服务与反馈：

【文章下载】【加入收藏】