锻压技术

压盖级进模排样设计的研究

英文标题：Research on layout design for gland progressive die

作者：何敏红王树勋武晓红

单位：江门职业技术学院

分类号：TG76

出版年,卷(期):页码：2013,38(3):115-117

摘要：

压盖多工位级进模的原企业排样设计方案为纵向单排，本文提出倾斜双排和倾斜三排的排样设计方案。研究发现倾斜三排排样设计虽然材料利用率最高，但其模具结构使其模具体积庞大，对冲制设备的要求超出该厂现有设备的能力。通过对材料利用率、模具复杂程度以及企业现有设备等方面综合分析，最后采用倾斜双排的新方案。与纵向单排相比，新方案的材料利用率从55%提高到76%，生产成本大为降低。

As the enterprise's original multi-position progressive die layout design for gland is of longitudinal single row type, the layout designs of inclined double row and inclined three row were proposed.It was found that although the material utilization ratio of inclined-three-row layout design was the highest, the die structure led to large die dimension which was beyond the capacity of the existing equipment of the enterprise. By comprehensive analysis of material utilization ratio, the complexity of the dies and the existing equipment of the enterprise, the new layout design of inclined double row was finally adopted. Compared with the layout design of longitudinal single row, the material utilization ratio of the new layout design is increased from 55% to 76%, leading to great reduction of the production cost.

基金项目：

2012年财政部、教育部中央专项资金职业教育实训基地建设项目（财教〔2012〕145号）；2012年广东省高职重点培育专业建设项目（粤财教〔2012〕445号）

参考文献：

［1］洪慎章，金龙建.多工位级进模设计实用技术[M]. 北京：机械工业出版社，2010.Hong S Z,Jin L J. Practical Design Technology of Multi\|Position Progressive Die [M].Beijing: China Machine Press,2010.
［2］陈炎嗣.多工位级进模设计与制造[M].北京：机械工业出版社，2006.Chen Y S.Design and Manufacture of Multi-Position Progressive Die[M].Beijing: China Machine Press,2006.
［3］曹勇，邓卫国.镇流器冲片双排无废料级进模设计[J]. 锻压技术, 2011 ,36(5):113-116.Cao Y,Deng W G.Design of double row and no waste of progressive die for ballast blanking pieces[J]. Forging & Stamping Technology, 2011，36(5):113-116.
［4］何敏红，王树勋. 支撑架多工位复合级进模设计[J]. 锻压技术, 2013 ,38(1):137-139.He M H,Wang S X.Design of multi\|position progressive die for support frame[J]. Forging & Stamping Technology, 2013，38(1):137-139.
［5］何敏红，王树勋. 悬挂件多工位级进模的设计[J]. 锻压技术, 2012 ,37(5):115-117.He M H,Wang S X. Design of multi\|position progressive die for suspension component[J]. Forging & Stamping Technology, 2012，37(5):115-117.
［6］王春香.弹簧卡多工位级进模设计[J]. 锻压技术, 2010,35(3):124-127.Wang C X. Design of multi\|station progressive die for spring clinch [J]. Forging & Stamping Technology, 2010，35(3):124-127.
［7］王鹏驹.冲压模具设计师手册[M].北京：机械工业出版社，2009.Wang P J. Designer Manual of Stamping Die[M].Beijing: China Machine Press,2009.
［8］谭锋.手机连接器端子级进模设计[J]. 模具工业, 2012,38(9):31-35.Tan F. Progressive die for cellphone connector terminal[J]. Die & Mould Industry, 2012，38(9):31-35.
［9］于文强，叶成荫，张建龙.录音机开门推板级进模设计[J]. 锻压技术, 2012,37(2):100-102.Yu W Q,Ye C Y,Zhang J L. Progressive die design of recorder open\|door push plank[J]. Forging & Stamping Technology, 2012，37(2):100-102.
［10］王尚林，武晓红.电机前后支架级进模的设计与制造[J]. 锻压技术, 2011,36(2):100-102.Wang S L,Wu X H. Progressive die design and manufacture of motor anterior and posterior trestle component [J]. Forging & Stamping Technology, 2011，36(2):100-102.

服务与反馈：

【本网站尚未开通全文下载服务】【加入收藏】