锻压技术

接触簧片冲压工艺及模具结构设计

英文标题：Design of stamping process and die structure for contact spring

作者：钟江静梁士红

关键词：接触簧片切废弯曲排样级进模

分类号：TG386

出版年,卷(期):页码：2013,38(4):106-110

摘要：

以接触簧片的冲压工艺设计为研究对象，运用弯曲件的工序安排方法和级进模的排样设计方法，主要研究了接触簧片的弯曲和切废工艺设计方案。结果表明：根据冲件结构特点，采用分段弯曲和分段切除余料的方法，交替安排弯曲工位、切废工位和空工位，可以优化模具结构；用有去屑功能的抬起块抬起条料，用限位块控制模具的冲压高度，用带弹压装置的导板和弯曲凸模压料，有效控制了偏移和回弹，保证了接触簧片的精度。

Taking the contact spring’s stamping process design as an object of study, according to the process arrangement method of bending part and the layout design method of progressive die, the contact spring‘s process design in bending and cutting waste was studied. The results show that based on the stamping structure characteristics, using the method of sectional bending and segmental resection of surplus material, arranging alternately bending station, cutting waste station and space station, the die structure can be optimized. Using the lifting block with removing chips function to lift strip, the limiting block to control stamping height of the mould, the guide board with elastic press device and the bending punch to press strip, the offset and the rebound are controlled effectively. The precision of contact spring is guaranteed.

基金项目：

苏州工业职业技术学院科研课题（ＳＧＺ２０１２０５）

钟江静（1964-），女，本科，讲师

参考文献：

［1］王鹏驹，成虹.冲压模具设计师手册[M].北京：机械工业出版社，2009. Wang P J, Cheng H. Stamping Die Design Handbook [M]. Beijing: China Machine Press, 2009.
［2］徐政坤.冲压模具及设备[M].北京：机械工业出版社,2004. Xu Z K. Stamping Dies and Equipment [M]. Beijing: China Machine Press, 2004.
［3］郑家贤.冲压工艺与模具设计实用手册[M].北京：机械工业出版社，2007. Zheng J X. Stamping Process and Die Design Handbook [M]. Beijing: China Machine Press, 2007.
［4］吴宗泽.机械零件设计手册[M].北京：机械工业出版社，2004. Wu Z Z. Mechanical Design Manual [M]. Beijing: China Machine Press, 2004.
［5］何敏红，王树勋. 悬挂件多工位级进模的设计[J].锻压技术，2012,37(5):115-117. He M H, Wang S S. Design of multi-position progressive die for suspension component [J]. Forging & Stamping Technology, 2012，37（5）：115-117.
［6］赵祯，赵如堂.牵引钩锻件多工位组合模设计[J].锻压技术，2012,37(2)：109-111. Zhao Z, Zhao R T. Multi-station combined mold design of traction hook forging[J]. Forging & Stamping Technology, 2012，37（2）：109-111.

服务与反馈：

【文章下载】【加入收藏】