锻压技术

F51AE型钩舌的锻造工艺分析及模具设计

英文标题：Forging process and die design of knuckle F51AE

作者：卜文学赵增华杨勇胡福荣

关键词：锻造钩舌锻造模具折叠缺陷

分类号：TG316

出版年,卷(期):页码：2013,38(5):29-32

摘要：

锻造钩舌是一种常用的铁路车辆车钩牵引部件，该产品截面变化大、形状复杂、成形困难，存在不容易锻造的薄筋。根据该产品的尺寸和形状特点制定了合理的工艺方案，并且对拔模斜度和模具圆角进行了优化，对锻件折叠缺陷进行了模拟并提出解决措施。根据优化后的方案进行锻造模具设计，最终通过生产验证说明，批量生产的效果良好。

The forged knuckle is a kind of common drawing components used for couplers of railway wagons. The product has various sections，complicated shape and thin rib, which is difficult to form. According to the characters of forged knuckles, the process schemes were developed and draft angle and radius were optimized. The folding defect was simulated and the solutions were presented. Further, the forging dies were designed based on optimized technical process. Finally, the practical test shows that the parts of volume product are good.

基金项目：

卜文学（1969-），男，工程硕士，高级工程师

参考文献：

［1］李尚健. 锻造工艺及模具设计资料[M] . 北京: 机械工业出版社,1991.Li S J. Forging Process and Die Design[M]. Beijing: China Machine Press,1991.
［2］杜云慧，张励忠，刑书明，等.钩舌常见失效形式与机理[J]. 金属热处理, 2003,28(6): 48-52Du Y H, Zhang L Z, Xing S M, et al. Failure forms of the hook-head and its mechanism[J].Heat Treatment of Metals, 2003,28(6): 48-52.
［3］唐振英,唐林, 赵增华,等.铁路货车锻造钩舌成形工艺及数值模拟优化[J]. 锻压技术,2012,37(3):14-16.Tang Z Y, Tang L, Zhao Z H, et al. Forging process and FEM optimization for forged knuckles of railway wagons[J]. Forging&Stamping Technology, 2012,37(3):14-16.
［4］徐倩, 谢基龙, 缪龙秀，等. 基于单轴损伤的货车钩尾框多轴疲劳寿命分析[J]. 铁道学报, 2002,24(1):19-22.Xu Q, Xie J L, Miao L X, et al. Analysis of multi-axial fatigue life based on single axial stress condition of the coupler yoke[J]. Journal of the China Railway Society,2002,24(1):19-22.
［5］王凯, 王皓, 唐振英,等. 13B型货车钩尾框框体锻造工艺模拟及优化[J]. 锻压技术, 2013,38(2):14-16Wang K, Wang H, Tang Z Y, et al. Forging process and FEM optimization of 13B type forged yoke body for railway wagons[J]. Forging&Stamping Technology, 2013,38(2):14-16.

服务与反馈：

【文章下载】【加入收藏】