锻压技术

板材多点渐进成形控制系统设计

英文标题：Design of control system for sheet metal multi-point incremental forming

作者：蔡改贫廖强姜志宏李龙茂

单位：江西理工大学

关键词：渐进成形 DMC控制器控制系统

分类号：TH16；TP27

出版年,卷(期):页码：2013,38(5):42-45

摘要：

针对板材在单点渐进成形中成形平面受力不平衡，成形力相对较大，导致成形件极易产生失稳，并且成形效率不高等问题，在充分汲取单点渐进成形优点与多点成形优点的基础上，提出了多点渐进成形的方法，根据成形原理及成形路径规划研制出相应的成形控制系统。该系统以DMC2610控制器为核心，采用“PC+运动控制器”的主从式控制方式，在VB6.0环境下实现软件的开发，并详细分析了该系统的软硬件结构及实现方法。实验表明，该系统具有很好的灵活性和开放性，满足目前多点渐进成形实验研究的需要。

Focused on the problems of lower forming efficiency and the workpiece tends to instability due to the non-homogenous force in the shaped surface during incremental forming and larger forming force，and based on the merits of single point incremental forming and multi-point forming process, the multi-point incremental forming was presented. The corresponding forming control system was developed according to the principle of forming and path planning. Using DMC2610 controller as core and the master-slave control mode of “PC and controller”, the software of system was designed by VB6.0. The hardware and the software structure of the control system and the implementation method were introduced in detail. The result shows that the control system has good flexibility and openness，which meets the needs of experimental study for the current multi-point incremental forming.

基金项目：

国家自然科学基金资助项目(50975131)

蔡改贫（1964-），男，博士，教授

参考文献：

［1］周六如.板料数控渐进成形中变形力的研究[J].精密成形工程,2010,1(2):10-14.Zhou L R.A study of NC incremental sheet metal forming force[J].Journal of Netshape Forming Engineering,2010,1(2):10-14.
［2］马琳伟,莫健华.基于有限元仿真的金属板材单点渐进成形分析[J].塑性工程学报,2007,14（6）:96-100.Ma L W,Mo J H.The mechanical analysis of sheet metal incremental forming by numerical simulation based on solid element[J].Journal of Plasticity Engineering,2007, 14(6):96-100.
［3］Amino H, Lu Y, Maki T,et al.Dieless NC forming prototype of automotive service parts[A].Proceeding of 2nd International Conference on Rapid Prototyping and Manufacturing[C].Beijing,2002:179-185.
［4］蔡改贫,朱宏亮,姜志宏,等.板材多点对称式渐进成形过程模拟研究[J].锻压技术,2012,37(6):26-30.Cai G P,Zhu H L,Jiang Z H，et al.Simulation research on plate multi-point symmetric type incremental forming process[J].Foging and Stamping Technology,2012,37(6):26-30.
［5］李湘吉.基于多点成形与渐进成形的板料复合成形技术研究[D].长春:吉林大学,2009.Li X J.Research on the Combined Forming Technology for Sheet Metal Based on Multi-point Forming & Incremental Forming Technology[D].Changchun:Jilin University,2009.
［6］刘杰,阳林.金属板材液压成形监控系统的设计与开发[J].机床与液压,2011,39(10):102-106.Liu J,Yang L.Sheet metal-hydroforming monitoring system design and development[J].Machine Tool & Hydraulics,2011,39(10):102-106.
［7］于洪宇,杨林.基于DMC运动控制器的开放式数控车床系统的开发与应用[J].机械设计与制造,2011,(10):157-159.Yu H Y,Yang L.Development and application of open CNC lathe system based on DMC motion controller[J].Machinery Design and Manufacture,2011,(10):157-159.
［8］汪胜莲.单点渐进成形设备数控系统总体设计[J].装备制造技术,2012,(2):213-214.Wang S L.Overall design for single point incremental forming equipment of CNC system[J].Equipment Manufacturing Technology,2012,(2):213-214.
［9］李军超,叶春生,莫健华，等.基于PMAC 的板材无模快速成形机控制系统研究[J].锻压技术,2004,29(5):53-55.Li J C,Ye C S,Mo J H，et al.Research on PMAC-based control system of rapid prototyping & manufacturing machine without die[J]Forging & Stamping Technology,2004,29(5):53-55.

服务与反馈：

【本网站尚未开通全文下载服务】【加入收藏】