锻压技术

圆筒拉深件形状与厚度变化数值模拟分析

英文标题：Numerical simulation analysis of shape and thickness change in cylinder parts drawing

作者：彭广威

单位：株洲职业技术学院

分类号：TG385

出版年,卷(期):页码：2013,38(5):62-65

摘要：

借助Dynaform软件，模拟分析了在不同拉深凹模圆角半径情况下,模具间隙及压边力等工艺参数对直壁圆筒拉深件外形尺寸及侧壁厚度的影响规律，并得到了该拉深件最优的凹模圆角半径参数，其值比经验公式计算结果小。通过进行两个不同凹模圆角半径的对比拉深试验，验证了数值模拟结果相对于经验公式的准确性和科学性，从而为该类零件拉深工艺方案的优化提供参考。

Using Dynaform software, the influence law of process parameters, such as die clearance and pressure on the straight wall cylindrical deep drawing parts overall dimensions and wall thickness was simulated and analyzed under the condition of different radius of deep drawing die. And the optimal die radius of the deep drawing pieces was obtained, the value of which is smaller than empirical formula calculation results. Comparing two different die fillet radius of the deep drawing test, the accuracy and scientific of the numerical simulation results relative to the empirical formula is verified, which has certain value reference for the optimization of the deep drawing process of such parts.

基金项目：

湖南省教育厅一般资助项目（10C0346）

彭广威(1975-),男,硕士，讲师

参考文献：

［1］郑家贤. 冲压模具设计实用手册[M]. 北京:机械工业出版社，2007.Zheng J X. Stamping Die Design and Practical Manual[M]. Beijing: Mechanical Industry Press,2007.
［2］徐政坤. 冲压模具设计与制造[M]. 北京:化学工业出版社，2003.Xu Z K. Stamping Die Design and Manufacture[M]. Beijing: Chemical Industry Press,2003.
［3］王秀凤，郎利辉.板料成形CAE设计及应用 [M].　北京:北京航空航天大学出版社,2008.Wang X F, Lang L H. Sheet Metal Forming CAE Design and Application [M]. Beijing: Beihang University Press,2008.
［4］杨立军.基于Dynaform的筒形件拉深成形数值模拟技术[J]. 机械设计与制造,2011,(10):228-230. Yang L J. Based on Dynaform cylindrical deep drawing forming numerical simulation technology[J]. Mechanical Design and Manufacturing, 2011,(10):228-230.
［5］李飞舟,王积元,陈立峰. 板料成形CAE设计及应用 [M]. 北京: 北京航空航天大学出版社, 2010. Li F Z, Wang J Y, Chen L F. Sheet Metal Forming CAE Design and Application [M]. Beijing: Beihang University Press,2010.
［6］张蓉. 304不锈钢拉深成形的物理模拟与数值模拟研究 [D]. 长沙: 中南大学, 2007.Zhang R. 304 Stainless Steel Deep Drawing Physical Modeling and Numerical Simulation Studies [D]. Changsha: Central South University, 2007.

服务与反馈：

【文章下载】【加入收藏】