锻压技术

基于LabVIEW的螺旋压力机打击力测量系统

英文标题：Strike force measuring system of screw press based on LabVIEW

作者：石然然李名尧张报建李晓霞马凯

单位：上海工程技术大学

分类号：TG316.1+8

出版年,卷(期):页码：2013,38(5):123-126

摘要：

基于LabVIEW的测力装置能够有效地测量大吨位压力机的打击力数据，并可以实时显示、测量、存储打击力，具有较强的实用性。利用圆环试样镦粗变形方法进行标定，可以克服摩擦系数对打击力标定的不利影响。利用有限元模拟圆环试样镦粗变形方法对打击力进行标定。结果显示，有限元模拟方法比用圆柱体和主应力法的标定精确度更高，采用低碳钢圆环标定试样也比用紫铜圆柱体试样更经济。

The data of the strike force for heavy press can be measured effectively with the equipment based on LabVIEW. The strike force can be displayed, measured and stored on real time with actual utility. The strike force was calibrated by the ring upsetting，which could overcome the negative influence of the friction for the calibration. The data of the calibration were got by FEM，and the result shows that the calibration accuracy by FEM is higher than that by the cylinder upsetting with principal stress method. The low-carbon steel ring sample is also cheaper than the copper cylinder sample.

基金项目：

上海市教育委员会科研创新资助项目（12ZZ183）；上海工程技术大学研究生科研创新资助项目（2012yjs13）

石然然（1988-），女，硕士研究生

参考文献：

［1］毕见强,宋化远,张国强,等.锻压机械打击力测试方法的研究[J].山东机械,1994,(4):13-16.Bi J Q,Song H Y,Zhang G Q,et al. Research on strick force test method of forging machinery[J].Shandong Machinery,1994,(4):13-16.
［2］蒋启.压力机打击力检测研究[D].上海:上海工程技术大学,2011.Jiang Q.Research on the Testing of Press Hitting Power[D].Shanghai:Shanghai University of Engineering Science,2011.
［3］陈超,唐善华.基于LabVIEW 压力试验机测试系统的设计与实现[J].包装工程,2008,29(8):91-93.Chen C,Tang S H.Design and implementation of test system of pressure tester based on LabVIEW[J].Packaging Engineering,2008,29(8):91-93.
［4］徐磊,翟文涛,严利民.基于LabVIEW 的流量测试系统设计[J].仪器仪表用户,2008,22(4):70-71. Xu L,Zhai W T,Yan L M.Design of flow test system based on LabVIEW[J].Electronic Instrumentation Customers,2008,22(4):70-71.
［5］郑维彪.利用声卡进行振动信号采集和分析研究[D].江苏:南京航空航天大学,2008.Zheng W B.Researches of Vibration Signal Acquisition and Analysis Using Sound Card[D].Jiangsu:Nanjing University of Aeronautics and Astronautics,2008.
［6］陈树学,刘萱.LabVIEW宝典[M].北京:电子工业出版社,2011.Chen S X,Liu X.LabVIEW bible[M]. Beijing:Electronic Industry Press,2011.
［7］朱彦,雷君相,罗羽舟,等.基于LabVIEW液压成型机数据采集系统的设计[J].锻压技术,2012,37（1）:100-104.Zhu Y,Lei J X,Luo Y Z,et al.Design of data acquisition system for hydraulic pressure molding machine based on LabVIEW[J].Forging & Stamping Technology,2012,37（1）:100-104.
［8］付增祥,王海荣,苏少博.大吨位锻压设备力能特性标定的重要性和关键技术[J].机械科学与技术,2001,20(6)：890-891.Fu Z X,Wang H R,Su S B.The importance and key techniques for load/energy calibration of forging equipment with Large Capacity[J].Mechanical Science and Technology,2001,20(6)：890-891.
［9］韩志仁,陶华.基于有限元分析的摩擦系数确定[J].锻压技术,2008,33(1):136-138.Han Z R,Tao H.Determination of friction coefficient based on finite element analysis[J].Forging & Stamping Technology,2008,33(1):136-138.
［10］胡建军,李小平.Deform-3D塑性成型CAE应用教程[M].北京:北京大学出版社,2011.Hu J J,Li X P. Plastic Molding CAE Application Tutorial Based on Deform-3D.[M].Beijing:Cambridge University Press,2011.

服务与反馈：

【文章下载】【加入收藏】