锻压技术

曲线焊缝位置对拼焊板焊缝移动的影响规律研究

英文标题：Research on influence of non-linear weld line location on weld line movement of tailor-welded blank

作者：张家骅陈志祥徐连强余暕浩

单位：无锡工艺职业技术学院

分类号：TG386

出版年,卷(期):页码：2013,38(6):156-159

摘要：

焊缝位置对拼焊板成形性能有重要影响。在盒形件冲压和有限元模拟中，发现焊缝位置对焊缝移动尤其是法兰处焊缝移动有重要影响。通过简化研究模型，布置不同位置焊缝，进行U形件冲压有限元模拟。根据分析数据，建立几何分析模型，研究了焊缝位置对焊缝移动的影响规律。结果表明，法兰处的焊缝移动主要和焊缝与材料流动方向之间的夹角、材料流动量有关。材料流动量越大，法兰处焊缝移动越大。当材料流动量一致时，法兰处焊缝与材料流动方向之间角度越大，法兰处焊缝移动越大。

The weld line location has an important influence on the tailor-welded blanks forming process. In the rectangular box stamping experiment and FEA simulation, the phenomenon that the weld location had an effect on the weld line movement, especially on the flange weld line movement was found. By simplifying the model in FEA simulation and laying different weld-line positions, the U shape model was used to study this phenomenon. The influence of weld line location on weld line movement of tailor-welded blank was analyzed by data analyzing and simple geometry model. The results show that the weld line movement on the model flange is influenced by the angle between weld line position and material flow direction，and the amount of material flow. The more the amount of material flow, the more weld line movement on the model flange. When the amount of material flow is certain, the more the angle between weld line position and material flow direction, the more weld line movement on the model flange.

基金项目：

国家自然科学基金资助项目（50475125）

参考文献：

［1］陈炜，杨继昌，林忠钦. 拼焊板在车身覆盖件制造中的应用[J]. 汽车工程，2003, 25(1): 82-87.Chen W, Yang J C, Lin Z Q. A study on the application of tailor-welded blank to car body closure panels manufacturing[J]. Automotive Engineering，2003, 25(1): 82-87.
［2］Siegert K, Glasbrenner B, Possehn T. Forming of tailored blanks with non linear weld-Lines[J]. SAE, 2000-01-0414: 27-31.
［3］陈水生，林建平. 焊缝位置对拼焊板拉伸行为影响的解析预测[J]. 材料工程，2011,(10):33-37. Chen S S, Lin J P. An analytical model to predict the effect of weld location on tensile bechaviots of tailor welded blanks[J]. Journal of Material Engineering，2011，(10):33-37.
［4］吕盾，陈炜，郭伟刚，等. 随行程变化变压边力拼焊板盒形件成形性能研究[J]. 锻压技术，2006，31（4）：129-131.Lv D, Chen W, Guo W G, et al. Investigation of formability for tailor-welded blank box based on variable blank-holder ofrce over stroke[J]. Forging & Stamping Technology，2006，31（4）：129-131.
［5］朱元右，姜银方，杨继昌，等. 拼焊板冲压成形中的焊缝移动分析[J]. 中国机械工程，2006，17 (15): 1618-1622. Zhu Y Y, Jiang Y F, Yang J C, et al. Analysi of weld-line movement in tailor-welded blank's formation[J]. China Mechanical Engineering，2006，17(15): 1618-1622.
［6］Klaus Sigert, Edgar Knabe. Fundamental research and draw die concepts for deep drawing of tailored blanks[J]. SAE, 950921: 866-876.
［7］Hisashi Hayashi, Suk-Wan Pak, Matsuo Usuda. Metal flow of a tailored blank in a square cup deep drawing[J]. SAE, 980447: 1-7.
［8］Hisashi Kusuda, Toshiyuki Takasago, Fumiaki Natsumi. Formability of tailored blanks[J]. Journal of Materials Processing Technology，1997，(71): 134-140.
［9］袁清华，张文明，黄重国，等. TC4盒形钣金零件气压成形工艺的研究[J]. 稀有金属，2009,33(4):478-483.Yuan Q H，Zhang W M，Huang Z G，et al. Air pressure forming process of Ti-6Al-4V sheet metal box part [J]. Chinese Journal of Rare Metals, 2009,33(4): 478-483.
［10］张帷, 康凤, 胡传凯, 等. Ti8LC钛合金材料切削过程的有限元仿真及性能试验[J]. 稀有金属，2011,35(5):776-780.Zhang W, Kang F, Hu C K, et al. Research on cutting process of Ti8LC titanium alloy with finite simulation and cutting performance tests [J].Chinese Journal of Rare Metals, 2011,35(5):776-780.
［11］王燕华, 黄重国, 袁清华, 等. TC1深型腔负角度零件超塑成形模具设计与优化[J]. 稀有金属，2010,34(4):491-496.Wang Y H, Huang Z G, Yuan Q H, et al. Mold design and improvement of TC1 parts with deep cavity and negative angle for superplastic forming[J]. Chinese Journal of Rare Metals, 2010,34(4): 491-496.

服务与反馈：

【文章下载】【加入收藏】