锻压技术

一模四腔挤压ZK60镁合金棒材的数值模拟与实验研究

英文标题：Research of FEM and experiment of ZK60 magnesium alloy bar

作者：原国森

单位：河南机电高等专科学校

关键词：一模四腔镁合金挤压速度挤压

分类号：

出版年,卷(期):页码：2014,39(1):64-68

摘要：

基于Deform-3D有限元平台建立了一模四腔的镁合金棒材挤压有限元模型，并基于该模型对挤压工艺参数中的挤压速度等参数进行优化，确定了ZK60镁合金棒材挤压合理的工艺参数。结果表明，采用一模四腔分流挤压方法生产直径为12.5 mm 的ZK60镁合金棒材，其较为合理的挤压工艺为：在挤压温度为420 ℃时挤压速度为4～7mm·s-1。在某公司进行了实验，验证了所得优化工艺参数的可行性。

The finite element model (FEM) for the extrusion process of four protholes die of ZK60 magnesium alloys bar was developed under the Deform-3D platform, based on which, the extrusion parameters were optimized and the rational extrusion parameters of ZK60 magnesium alloy bar were determined. The result shows that for ZK60 magnesium alloy bar with 12.5 mm diameter extruded by four portholes die, the proper extrusion temperature is 420 ℃ and the reasonable range of extrusion speed is 4-7 mm·s-1. Additionally, the experimental extrusion was carried out in a company, which verified the rationality of extrusion parameters obtained by FE simulation.

基金项目：

河南机电高等专科学校校企合作课题（HNJDGZXQ-004）

原国森(1981-),男，硕士，讲师

参考文献：

[1]石磊,杨合,郭良刚,等. ECHE 挤压对AZ31镁合金组织和性能的影响[J].稀有金属材料与工程,2012,41(11):1955- 1959.

Shi Lei, Yang He, Guo Lianggang, et al. Effect of ECHE forming on the microstructure and mechanical properties of AZ31 magnesium alloy [J]. Rare Metal Materials and Engineering, 2012, 41(11):1955-1959.

[2]王忠堂,贺琳,梁海成,等.ZK60镁合金管材热挤压成形组织演变规律[J]. 金属热处理,2011,36(12):74-77.

Wang Zhongtang, He Lin, Liang Haicheng, et al. Microstructure evolvement of ZK60 magnesium alloy during tube hot extrusion [J]. Heat Treatment of Metals, 2011, 36(12):74-77.

[3]Ying T, Huang J P, Zheng M Y, et al. Influence of secondary extrusion on microstructures and mechanical properties of ZK60 Mg alloy processed by extrusion and ECAP [J]. Transactions of Nonferrous Metals Society of China，2012, 22(8):1896-1901.

[4]邸利青,张士宏.分流组合模挤压过程数值模拟及模具优化设计[J].塑性工程学报.2009, 16(2):123-143.

Di Liqing, Zhang Shihong. Porthole die extrusion process numerical simulation and optimal die design [J]. Journal of Plasticity Engineering，2009, 16(2):123-143.

[5]何运斌,潘清林,覃银江. 等通道角挤压制备细晶ZK60镁合金的组织与力学性能[J].中国有色金属学报,2010,20(12): 2274-2282.

He Yunbin, Pan Qinglin, Qin Yinjiang. Microstructure and mechanical properties of ultra-fine grain ZK60 magnesium alloy processed by equal channel angular pressing [J]. The Chinese Journal of Nonferrous Metals，2010, 20(12): 2274-2282.

[6]王春艳,莫淑华,尹志娟,等.温度和应变速率对 ZK60镁合金压缩变形行为的影响[J]. 黑龙江工程学院学报：自然科学版，2010, 24(4):46-62.

Wang Chunyan, Mo Shuhua, Yin Zhijuan, et al. The effects of temperatures and strain rates on the compressive deformation behavior of ZK60 magnesium alloy [J]. Journal of Heilongjiang Institute of Technology：Natural Science Edition，2010, 24(4):46-62.

[7]Lin J B, Wang Q D, Liu M P, et al. Finite element analysis of strain distribution in ZK60 Mg alloy during cyclic extrusion and compression [J]. Transactions of Nonferrous Metals Society of China，2012, 22(8):1902-1906.

[8]路君,靳丽,董杰,等. 等通道角挤压变形 AZ31 镁合金的变形行为[J]. 中国有色金属学报, 2009, 19(3): 424-432.

Lu Jun, Jin Li, Dong Jie, et al. Deformation behaviors of AZ31 magnesium alloy by equal channel angular extrusion [J]. The Chinese Journal of Nonferrous Metals，2009,19(3): 424-432.

[9]石磊,李继文,李永兵,等.高精度 AZ31镁合金的热挤压变形和力学性能分析[J].锻压技术,2009,34(6):35-38.

Shi Lei, Li Jiwen, Li Yongbing, et al. Hot extrusion deformation of AZ31 magnesium alloy and mechanics performance analysis [J]. Forging & Stamping Technology,2009,34(6):35-38.

[10]Roberto B, Figueiredo, Paulo R, et al. The processing of difficult-to-work alloys by ECAP with an emphasis on magnesium alloys [J]. Acta. Materialia, 2007, 55(14): 4769-4779.

[11]Li B, Joshi S, Azevedo K, et al. Dynamic testing at high strain rates of an ultrafine-grained magnesium alloy processed by ECAP [J]. Materials Science and Engineering: A, 2009,517 (1-2): 24-29.

[12]程磊，谢水生，黄国杰,等.分流组合模挤压铝合金口琴管的数值模拟[J].塑性工程学报,2008,15(4):131-135.

Cheng Lei, Xie Shuisheng, Huang Guojie, et al. Numerical simulation in the porthole dies extrusion of aluminum harmonica-shaped tube[J].Journal of Plasticity Engineering，2008, 15(4):131-135.

服务与反馈：

【本网站尚未开通全文下载服务】【加入收藏】