锻压技术

MP型热模锻压力机工作协调性的影响因素研究

英文标题：Research on impact factors of working coordination of

作者：赵晶文

单位：四川工程职业技术学院

分类号：

出版年,卷(期):页码：2014,39(1):86-90

摘要：

在MP型热模锻压力机工作协调性研究过程中，对部分MP型热模锻压力机的使用企业进行了调研，归纳了上死点偏移、连车、闷车、停车（无动作）四种典型协调性故障，结合故障现象对应的离合器、制动器动作控制元件、凸轮控制器、进排气电磁阀、离合器制动器的复位装置，对故障进行了定位。并根据各控制元件的工作原理和结构特征采用归纳整理法进行分析研究。分析结果表明，结构与控制系统调整和环境因素为热模锻压力机的主要协调性故障影响因素，并给出了相应的对策方法。

During the research process of work coordination of MP-type hot die forging press, the investigation was engaged in some enterprises using MP-type hot die forging press. Furthermore, four typical coordination failures were sumed up, such as top dead center offset, running problem, jamming and stalling (no working). Combining with the faults phenomenon corresponding with motion control components of clutch brakes, such as cam controller, intake and exhaust electromagnetic valve, clutch brakes reset device and the malfunctions were worked out. According to the operating principle and structural feature of every control element, the analysis and researches were done by using generalization method. The analysis results show that the structural and control system adjustment and environmental factors are the main coordination failure influences of hot die forging press. Then the corresponding countermeasures and methods were proposed.

基金项目：

四川省科技支撑计划项目（2008GZ0149）

赵晶文（1969-），男，学士，高级工程师

参考文献：

[1]鹿新建，柯尊芒，朱思洪，等.高速精密压力机下死点精度研究[J].锻压技术，2010，35（1）：87-92.

Lu Xinjian,Ke Zunmang,Zhu Sihong, et al. Research on bottom dead center(B.D.C) of high speed precision press[J]. Forging & Stamping Technology，2010，35（1）：87-92.

[2]鹿新建，甄文庆，田洪中，等.气压及转速对高速压力机下死点的影响[J].锻压技术，2009,34（1）：115-118.

Lu Xinjian,Zhen Wenqing,Tian Hongzhong ,et al. Influences of air pressure and rotating speed on bottom dead center of high-speed press[J]. Forging & Stamping Technology，2009,34（1）：115-118.

[3]热模锻压力机结构分析[EB/OL].http://www.xiaojinli. cn/article/20120927090129.html 2012-09-27.

Hot die forging press structure analysis[EB/OL]. http://www.xiaojinli.cn/article/20120927090129.html 2012-09-27.

[4]仲太生，季雪冬.分体式气阀连锁离合器与制动器分离不清的因素分析[J]. 锻压装备与制造技术，2011,46（1）：40-41.

Zhong Taisheng, Ji Xuedong. Split type air valve chain of clutch and brake separation factor analysis[J]. Forging Equipment and Manufacturing Techniques,2011，46(1): 40-41.

[5]李忠民,刘雨耕,卢喜,等. 热模锻压力机[M]. 北京：机械工业出版社，1990.

Li Zhongmin, Liu Yugeng, Lu Xi, et al. Hot Die Forging Press[M] Beijing: China Machine Press, 1990.

[6]电机工程手册编辑委员会.机械工程师手册[M] .北京:机械工业出版社，1989.

The Editorial Board of Mechanical Engineers Handbook and Electrical Engineering Handbook. Mechanical Engineers' Handbook[M]. Beijing: China Machine Press,1989.

[7]何德誉.曲柄压力机[M].北京：机械工业出版社，1981.

He Deyu. Crank Press[M]. Beijing: China Mechine Press, 1981.

[8]JBJ16-2000 J61-2000,机械工业环境保护设计规范[S] .

JBJ16-2000 J61-2000,Mechanical industry environmental protection design specification[S].

[9]JB/ZQ 4019-84,MP型热模锻压力机[S].

JB/ZQ 4019-84,MP-type hot die forging press[S].

[10]JB 3350-93,机械压力机安全技术要求[S].

JB 3350-93.Mechanical press safety technical requirements[S].

[11]JB 4203-93, 锻压机械安全技术要求[S].

JB 4203-93,Forging machinery safety technology requirements[S].

[12]中国重型机械工业协会.重型机械标准[M].昆明：云南科技出版社,2008.

CHMIA. Heavy Machinery Standard[M]. Kunming: Yunnan Science and Technology Publishing Press, 2008.

服务与反馈：

【本网站尚未开通全文下载服务】【加入收藏】