锻压技术

DC06钢极限拉深系数测定

英文标题：Limit drawing coefficient test of DC06 steel

单位：上海工程技术大学

分类号：TG356.2

出版年,卷(期):页码：2014,39(2):41-45

摘要：

DCO6钢是目前汽车覆盖件生产中使用量最大的钢板种类之一，准确掌握DC06钢各项材料力学性能可为生产实践节约成本、提高产品合格率及获得更大经济效益。基于无凸缘圆筒件的拉深试验测定DC06钢极限拉深系数，利用伺服压力机降低了实验次品率，提高了实验精度，在国标的基础上缩小了直径极差范围，并进行Dynaform模拟分析，证明了实验结果的可靠性；将极限拉深系数理论计算值、预测值与实验值三者进行比较分析，得到了较高的匹配率。

DC06 steel is one of the most consumable steel sheets used for the production of cover parts of automobile. Accurate knowledge of all material properties of DC06 will help to save cost in production and practice, improve product qualification rate, and obtain greater economic benefits. The limit drawing coefficient of DC06 steel was tested based on the experiment of drawing of flangeless cylindrical parts. The defective rate was decreased and the experiment accuracy was improved using servo pressure machine, and the range of diameter was reduced on the basis of international standard.Then,the Dynaform simulation analysis was carried out to prove the reliability of experiment results. Besides, the calculated value under theoretical calculation formula, predicted value under prediction formula, and experimental value were compared and analyzed to generate a comparatively high match ratio.

基金项目：

国家自然科学基金资助项目（51075256）

张文瑞（1990-），男，硕士研究生

参考文献：

［1］肖景容,姜奎华.冲压工艺学[M].北京:机械工业出版社，1999.Xiao Jingrong, Jiang Kuihua. Stamping Technology [M]. Beijing: China Machine Press,1999.
［2］ GB/T 15825.2-2008，金属薄板成形性能与试验方法[S].GB/T 15825.2-2008, Metal formability and test methods[S].
［3］机械设计手册编委会.机械设计手册:第6卷[M].新版.北京:机械工业出版社,2004.Mechanical Design Handbook Editorial Board. Mechanical Design Handbook:Volume 6[M].New Edition. Beijing: China Machine Press,2004.
［4］王孝培.冲压手册[M].2版.北京:机械工业出版社,1999. Wang Xiaopei. Stamping Manual[M].2nd Edition. Beijing:China Machine Press,1999.
［5］钟志华,李光耀.薄板冲压成型过程的计算机仿真与应用[M].北京:北京理工大学出版社,1998.Zhong Zhihua,Li Guangyao. Sheet Metal Forming Process Simulation and Application[M].Beijing: Beijing Institute of Tech-nology Press, 1998.
［6］贺平,王巍,万良辉.圆筒形件极限拉深系数ｍｋ研究[J].锻压技术,2005,30(6):21-23.He Ping,Wang Wei,Wan Lianghui.Study about cylindrical pieces limit drawing coefficient mk[J].Forging & Stamping Technology, 2005,30(6):21-23.
［7］聂慧慧,池成忠,黄莉莉,等.基于塑性应变比的圆筒形件极限拉深系数预测[J].锻压技术，2013,38(1):143-146.Nie Huihui,Chi Chengzhong,Huang Lili,et al.Based on plastic strain ratio cylindrical piece limit drawing coefficient prediction[J].Forging & Stamping Technology,2013,38(1):143-146.

服务与反馈：

【文章下载】【加入收藏】