锻压技术

GQ280钢冲压成形应用及回弹控制模拟

英文标题：Stamping application and springback control simulation for GQ280 steel

作者：黄娜余际星成秀文宋燕利王维

单位：武汉理工大学

分类号：TG386

出版年,卷(期):页码：2014,39(2):57-62

摘要：

GQ280冷轧高屈服强度钢是一种新型高强度钢，用于轿车冲压成形结构件，但其冲压成形性能偏低，弯曲回弹大。通过拉伸试验得到GQ280钢板的力学性能，抗拉强度420 MPa，屈强比0.8。并采用Dynaform软件模拟GQ280座椅锁扣支撑板的成形过程。支撑板上成形加强筋使制件刚度、应力分布和强度获得显著改善，弯曲回弹得到有效控制，回弹减小34.3%～84.47%。

GQ280 cold-rolled high yield strength steel is a new kind of high strength steel used for car stamping parts，but it has low stamping performance and large bending springback. Obtained by tensile test, the tensile strength of GQ280 steel plate was 420 MPa and the yield ratio was 0.8. The forming process of GQ280 steel seat lock support plate was simulated by Dynaform. Therigidity, stress distribution and strength of parts are improved significantly by setting reinforcing ribonsupport plate. The springback is controlled effectively and dropped by 34.3%-84.47%.

基金项目：

国家自然科学基金青年科学基金项目（51305317）

黄娜（1988-），女，硕士研究生

参考文献：

［1］黄世民，杨斌.第三代冲压用钢-超低碳无间隙原子钢(IF)[J].材料工程，1992，(2):42-48.Huang Shimin, Yang Bin. The third generation steel used for pressing-ultra-low carbon steel without interstitial(IF) [J].Materials Engineering, 1992，(2):42-48.
［2］肖景容，姜奎华.冲压工艺学[M].北京：机械工业出版社，1994.Xiao Jingrong, Jiang Kuihua. Sheet Metal Forming[M].Beijing:China Machine Press,1994.
［3］季学荣，丁晓红.板壳结构加强筋优化设计方法[J].机械强度，2012，34(5)：692-698.Ji Xuerong, Ding Xiaohong. Design optimization method of stiffeners on plane and shell structures[J].Mechanical Strength,2012，34(5):692-698.
［4］刘全坤.材料成形基本原理[M].北京：机械工业出版社，2004.Liu Quankun. The Basic Principle of Material Forming[M].Beijing:China Machine Press,2004.
［5］陈文亮.板料成形CAE分析教程[M].北京：机械工业出版社，2005.Chen Wenliang. Sheet Metal Forming CAE Analysis Tutorial[M].Beijing:China Machine Press,2005.
［6］瞿烨波，余际星，彭勇，等.基于Dynaform纵梁后板成形工艺及回弹控制模拟分析[J].锻压技术，2011,36（1）：43-46.Qu Yebo, Yu Jixing, Peng yong，et al. Simulation analysis of forming process and springback control of longeron after-reinforcing plate based on Dyanform[J].Forging & Stamping Technology,2011，36(1):43-46.
［7］段昀辉，史国宏，傅向阳.车身钣金件形貌设计优化[J].上海汽车，2012, (9)：45-49.Duan Junhui, Shi Guohong, Fu Xiangyang. Body structure parts topograpy and design optimization[J].Shanghai Auto,2012, (9):45-49.
［8］徐芝纶.弹性力学简明教程[M].北京：人民教育出版社，1983.Xu Zhilun. Elastic Mechanics Introductory Tutorial[M].Beijing:People's Education Press,1983.
［9］付立英，王维扬.四边形加筋板的拓扑研究[J].科学技术与工程，2008，8(7)：1926-1928.Fu Liying, Wang Weiyang.Topological study of quadrilateral stiffened plate[J].Science Technology and Engineering,2008，8(7):1926-1928.
［10］黄天泽，黄金陵.汽车车身结构与设计[M].北京：机械工业出版社，2002. Huang Tianze, Huang Jinling. The Car Body Structure and Design[M].Beijing:China Machine Press,2002.

服务与反馈：

【文章下载】【加入收藏】