锻压技术

钛合金螺母浮动式精密温成形工艺研究

英文标题：Research of precision warm-forming by floating-die for titanium alloy nut

分类号：TG371

出版年,卷(期):页码：2014,39(2):74-78

摘要：

试验性研究了钛合金自锁螺母的温镦成形工艺。首先通过分析自锁螺母的结构特点和材料特性，并用Deform模拟螺母的成形过程，同时针对螺母六角成形困难的问题，提出了用浮动凹模成形钛合金自锁螺母的技术。随后通过对比分析固定凹模，研究了浮动凹模在金属成形时的运动模型与摩擦力分布特点。最后通过试验生产对比验证了该工艺方案的可行性，同时分析研究了温镦成形时钛合金的金相组织及过热组织，实现了钛合金螺母的精密成形，不仅提高了生产效率，更节省了材料。

The warm upsetting for titanium alloy self-locking nut was experimentally researched. Aim to the question that the hexagonal edges of nut were difficult to form，through studying the structure and material and simulating the forming situation and loads with Deform,the technology of titanium alloy self-locking nut formed by floating-die was proposed. And then the motion model and friction distribution of floating-die were analyzed in the metal forming by comparative analyzing the fixed-die.Finally, it was contrasted and proved that the technology is feasible with the actual production, meanwhile the metallurgical structure and overheated structure of titanium alloy in warm precision-forming of hexagonal nuts were investigated.The precision forming of titanium alloy nut is realized，which improves the production efficiency and saves the material.

基金项目：

申庆援(1966-),男,本科,高级工程师

参考文献：

［1］《工程材料实用手册》编辑委员会. 工程材料实用手册：第4卷钛合金铜合金[M]. 北京：中国标准出版社，2002.Engineering Material Manual Editorial Board. Engineering Material Manual：Volume 4 Titanium Alloy Copper Alloy[M]. Beijing: China Standards Press,2002.
［2］邵宗科，张文明，黄重国，等. TC4钛合金负角度零件超塑成形及性能研究[J]. 稀有金属，2012，36（4）:511-516.Shao Zongke, Zhang Wenming, Huang Zhongguo, et al. Superplastic forming and mechanical properties for TC4 alloy negative-angle part[J].Chinese Journal of Rare Metals,2012, 36(4):511-516.
［3］洪慎章. 冷挤压实用技术[M]. 北京：机械工业出版社，2004.Hong Shenzhang. Cold Extrusion Practical Technology[M]. Beijing: China Machine Press, 2004.
［4］郭拉凤，朱艳春，孔虎星，等. 钛合金复杂构件等温锻造工艺研究[J]. 稀有金属,2012，36(3):357-362.Guo Lafeng, Zhu Yanchun, Kong Huxing, et al. Isothermal forging process of titanium alloy complex components[J].Chinese Journal of Rare Metals， 2012, 36(3):357-362.
［5］郑宇锋，苏传义，谢文才，等. CAE分析在产品设计阶段的应用[J]. 锻压技术,2012，37(2):51-54.Zheng Yufeng,Su Chuanyi, Xie Wencai, et al. Application of CAE in the stage of production design[J]. Forging & Stamping Technology, 2012，37(2):51-54.
［6］王波，李名尧，吴华春，等. 基于Deform的换向器座冷镦挤模具优化[J]. 锻压技术,2012, 37(4):103-107.Wang Bo, Li Mingyao, Wu Huachun, et al. Cold upset-extruding mold optimization of commutator block based on Deform[J]. Forging & Stamping Technology,2012, 37(4):103-107.
［7］辛选荣，单垄垄. 浮动凹模径向挤压力经验计算方法[J]. 中国机械工程,2013, 34(4):547-551.Xin Xuanrong, Shan Longlong. An experiential calculation method to radial extrusion pressure by floating-die[J]. China Mechanical Engineering, 2013, 34(4):547-551.
［8］单垄垄，辛选荣. 高速钢斜撑块精密挤压成形工艺与性能研究[J]. 锻压技术,2012，37(3):67-72.Shan Longlong, Xin Xuanrong. Research on precise extrusion process and property of high-speed steel sprag[J]. Forging & Stamping Technology,2012, 37(3):67-72.
［9］尤振平，惠松骁，叶文君，等. TC4钛合金轧板的织构对动态力学性能影响[J]. 稀有金属,2012，36(1):31-35.You Zhenping, Hui Songxiao, Ye Wenjun, et al. Effect of texture on dynamic mechanical property of TC4 rolled plate[J]. Chinese Journal of Rare Metals,2012, 36(1):31-35.

服务与反馈：

【文章下载】【加入收藏】