锻压技术

复杂型面零件冲压回弹参考点的选择与应用

英文标题：Choice and application of reference point in springback of complex curvature parts punching

作者：冯杨阮峰

单位：华南理工大学

分类号：TG386

出版年,卷(期):页码：2014,39(3):38-41

摘要：

对于复杂型面零件，冲压回弹随参考点选择不同而不同，而且精确选择很难。以最小模具修模量为目标，提出一种回弹参考点选择的方法。该方法采用计算机仿真和逆向工程技术，计算回弹值并确定最优的回弹参考点。即在仿真计算中试确定回弹参考点，然后将实际冲压件通过逆向工程技术重构型面，采用迭代最近点算法将重构面与设计面进行配准，计算回弹值并分析其特征，判断参考点选择是否合理，通过与其他参考点配准结果进行对比以及实验验证，验证回弹参考点选择方法的可行性。

For the complex curvature parts, the values of springback are various according to reference points, and the reference point is difficult to choose precisely. In order to obtain the minimum amount of mould modification, a method of choosing springback reference point was presented. Based on computer simulation and reverse engineering, the values of springback were calculated to get the optimal reference point. That is, the reference point was confirmed by simulation at first, then the surface of stamping part was reconstructed by reverse engineering. The reconstructed surfaces and the designed surfaces were matched by the method of Iterative Closest Point (ICP), and the value of spingback was calculated and analyzed to illuminate whether the choice of reference point was reasonable.The results of other reference points and experiments were compared to validate the feasibility of this method.

基金项目：

广州市科技攻关计划项目（2007Z2-D9031）

参考文献：

［1］朱东波,孙琨，李涤尘，等.板料成形回弹问题研究新进展[J].塑性工程学报，2000，7(1)：11-17.Zhu Dongbo, Sun Kun, Li Dichen, et al. The new research progress of sheet metal stamping springback[J]. Journal of Plasticity Engineering, 2000,7(1):11-17.
［2］谷瑞杰，杨合，詹梅，等.弯曲成形回弹研究进展[J].机械科学与技术，2005，（6）：653-658.Gu Ruijie, Yang He, Zhan Mei, et al. A review of the research on springback in bending[J].Mechanical Science and Technology, 2005，(6):653-658.
［3］柴海啸. 基于几何和工艺补偿的冲压回弹控制方法研究[D]. 杭州: 浙江大学, 2006.Chai Haixiao. Research for Stamping Springback Control Method Based on Compensation of Geometry and Process [D].Hangzhou: Zhejiang University, 2006.
［4］龚志辉. 基于逆向工程技术的汽车覆盖件回弹问题研究[D]. 长沙: 湖南大学, 2007.Gong Zhihui. The Research on Springback of Auto-body Panel Based on RE[D].Changsha: Hunan University, 2007.
［5］Eta/Dynaform软件小组. Eta/DYNAFORM用户手册(版本5.2）[R].底特律：美国工程技术联合公司，2006.Eta/DYNAFORM Software Group. Eta/DYNAFORM User Manual(Version 5.2) [R]. Detroit: American Engineering Technology Associates, Inc. ，2006.
［6］赵腾伦.ABAQUS6.6在机械工程中的应用[M].北京:中国水利水电出版社，2007.Zhao Tenglun. ABAQUS 6.6 in Mechanical Engineering[M]. Beijing:China Waterpower Press, 2007.
［7］冯杨，刘买花.镶块式螺旋叶片冲压模设计[J].机电工程技术，2011，（8）：168-170.Feng Yang, Liu Maihua. The helix blade punch mould design with die-edge[J]. Mechanical & Electrical Engineering Technology, 2011，(8):168-170.
［8］冯杨，刘买花.镶块式螺旋叶片冲压模设计力学分析[J].机电工程技术，2012，（8）：164-165,194.Feng Yang, Liu Maihua. Force analysis of helix blade punch mould with die-edge[J]. Mechanical & Electrical Engineering Technology, 2012，(8):164-165,194.
［9］张立力，齐恬，戴映荣.数值模拟参数和工艺参数对板材成形回弹影响到研究[J].锻压技术，2002，27（6）：18-21.Zhang Lili, Qi Tian, Dai Yingrong. Research on Influence of process and simulation parameters on springback in sheet forming process[J]. Forging & Stamping Technology, 2002，27(6):18-21.
［10］郭玉琴，姜虹，王小椿.覆盖件冲压加工中回弹预测的研究[J].机床与液压，2005，（3）：54-55，80. Guo Yuqin, Jiang Hong, Wang Xiaochun. Study on springback prediction in automotive panels forming processing[J]. Machine Tool & Hydraulics, 2005，(3):54-55,80.

服务与反馈：

【文章下载】【加入收藏】