锻压技术

径向柱塞泵瞬时理论流量仿真研究

英文标题：Simulation research on theoretical instantaneous flow rate of the radial piston pump

作者：艾超孔祥东刘胜凯王光平

单位：燕山大学

分类号：TH137.5

出版年,卷(期):页码：2014,39(3):94-98

摘要：

以RX系列径向柱塞泵为研究对象，建立了在定转子偏心量恒定和变量过程中瞬时理论流量的数学模型。通过Matlab/Simulink建模仿真，研究了柱塞数、定子半径等结构参数对瞬时流量的影响规律，并分析了该泵在典型变量形式下的瞬时流量特性，进而指出变量过程中流量死区的存在。分析结果表明，采用径向柱塞泵作主控元件的泵控系统，可以实现系统的高精度速度和位置控制。

Taking the proportionally controlled RX series radial piston pump as an investigation objective, the mathematical model of theoretical instantaneous flow rate based on constant and variable eccentricity was established. Through MATLAB-Simulink modeling and simulation analysis, the influence rule of piston numbers, stator radius and other structural parameters on instantaneous flow rate was developed and the instantaneous flow rate characteristics under typical variable form were analyzed. Then, the existence of flow dead zone in process of displacement change was revealed. The study results show that high precision speed and position control is realized by using the system which adopts proportional variable radial piston pump as the main control component.

基金项目：

高等学校博士学科点专项科研基金资助项目(20101333110001)；国家自然科学基金资助项目（51375422）；秦皇岛市科学技术研究与发展计划项目（201302A020）

参考文献：

［1］乔丰立，唐兵,卢堃,等. 比例控制径向柱塞泵性能预测[J]. 机械工程学报，2005，41(10)：67-70.Qiao Fengli,Tang Bing,Lu Kun,et al.Performance prediction of virtual electrohydraulic control radial piston pump[J]. Chinese Journal of Mechanical Engineering,2005，41(10)：67-70.
［2］周天悦，王存堂，顾建,等. 恒压式径向柱塞泵定子加速度振动特性研究[J]. 中国机械工程，2009，20(9)：1012-1015.Zhou Tianyue,Wang Cuntang,Gu Jian,et al.Research on the acceleration vibration characteristics of stator of constant-pressure radial piston pump[J]. China Mechanical Engineering. 2009，20(9)：1012-1015.
［3］徐兵，马吉恩，杨华勇. 液压变压器瞬时流量特性分析[J]. 机械工程学报，2007，43(11)：44-49.Xu Bing,Ma Jien,Yang Huayong. Analysis of instantaneous flow rate character of hydraulic transformer[J]. Chinese Journal of Mechanical Engineering. 2007，43(11)：44-49.
［4］李壮云.液压元件与系统[M].2版. 北京：机械工业出版社，2010.Li Zhuangyun.Hydraulic Elements and System[M].Second Edition. Beijing：China Machine Press, 2010.
［5］Ding Wensi,Zhang Xu. Modeling and simulation of sinusoidal pump[J]. Hydromechatronics Engineering,2012，（6）：25-30.
［6］Andrea E Catania, Alessandro Ferrari. Experimental analysis, modeling and control of volumetric radial-piston pumps[J]. Journal of Fluids Engineering,2011,133(8):1-12.
［7］Li Lan. The electro-hydraulic proportional control and simulation of the radial piston pump based on proportional-integral-derivative neural network[J]. Advanced Materials Research, 2010,139-141: 1749-1752.
［8］荆琴,杨国来,戴君,等.电液比例径向柱塞泵控制系统的建模与仿真研究[J].机床与液压, 2006，(6):91-93.Jing Qin,Yang Guolai,Dai Jun,et al.Model founding and simulation of electro-hydraulic proportional radial piston pump controlling system[J]. Machine Tool & Hydraulics, 2006,(6):91-93.
［9］乔丰立,卢堃，郝燕文,等.径向柱塞变量液压泵定子受力仿真分析[J].计算机仿真. 2007,24(3):307-309.Qiao Fengli,Lu Kun,Hao Yanwen,et al. Simulation analysis of radial plunger pump stator forces[J]. Computer Simulation, 2007,24(3):307-309.
［10］周天悦，王存堂，顾建，等.恒压式径向柱塞泵定子的位移振动特性分析[J].振动与冲击,2009,28(7):162-165.Zhou Tianyue,Wang Cuntang,Gu Jian,et al. Displacement vibration analysis for stator of a constant-pressure radial piston pump[J]. Journal of Vibration and Shock, 2009,28(7):162-165.

服务与反馈：

【本网站尚未开通全文下载服务】【加入收藏】