锻压技术

热轧铝板带跑偏模糊控制研究

英文标题：Deviation control research for hot rolled aluminum plate based on fuzzy theory

作者：凌于蓝刘义伦周维马立勇

单位：中南大学

分类号：TG335.5

出版年,卷(期):页码：2014,39(3):137-140

摘要：

在轧制过程中，由于存在轧制横向非对称因素，容易产生轧件中心线偏离轧机中心线的跑偏现象。跑偏会引起铝带拉断、卷取不对中等问题。针对跑偏现象，根据跑偏数学模型，提出采用模糊控制方法对跑偏过程进行控制。模糊控制器采用跑偏量及其变化率为输入量，辊缝差为调整量，采用经验法构建模糊规则，并利用MATLAB软件构建模糊控制器，对工业现场参数数据进行仿真实验，验证模糊控制纠偏的合理性。

Deviation of the center line for rolled piece from the center line of rolling mill is easily generated in rolling process because of transverse unsymmetrical factors of rolling. It loads to the problems of aluminum strip snap, winding misalignment, and so on. For the deviation phenomenon, the fuzzy control method was used to control the deviation process based on deviation mathematic model. Using the deviation value and its change rate as the input, the roll gap difference as the adjustment, the fuzzy rule was built by experience method, and the fuzzy control model was built based on MATLAB software. Furthermore, the simulation based on rolling operating data on the industrial scene was conducted to validate the accuracy of this deviation control model.

基金项目：

教育部科学技术研究重点资助项目(106123)；中南大学中央高校基本科研业务费专项资金资助项目(2013zzts197)

参考文献：

［1］Biggs D L, Hardy S J, Brown K J. Influence of process variables on development of camber during hot rolling of strip steel[J]. Iron Making and Steelmaking, 2000, 27(1): 55-62.
［2］刘义伦,廖伟,时圣鹏,等．宽幅铝板带热连轧跑偏控制的张力调节模型与仿真[J].锻压技术,2011,36(2):152-155.Liu Yilun, Liao Wei, Shi Shengpeng,et al. Model and simulation of tension manipulation for controlling the strip steering during wide aluminum hot rolling[J].Forging & Stamping Technology,2011,36(2):152-155.
［3］Duan X, Sheppard T. Three dimensional thermal mechanical coupled simulation during hot rolling of aluminum alloy 3003[J]. International Journal of Mechanical Science, 2002,(44): 2155-2172.
［4］赵先琼,刘义伦,林丹,等, 铝合金板带热连轧横向失稳跑偏过程数值模拟[J]. 机械科学与技术. 2011,30(8):1343-1347.Zhao Xianqiong, Liu Yilun, Lin Dan, et al. Numerical simulation of the ssymmetric unstable situation in hot continuous rolling of aluminium alloy[J].Mechanical Science and Technology for Aerospace Engineering,2011,30(8):1343-1347.
［5］Okamura Y, Hoshino I．State feedback control of the strip steering for aluminum hot rolling mills [J]. Control Eng. Practice, 1997, 5(8): 1035-1042.
［6］Hasegawa A, Taki F. Development of fuzzy set theory-based shape conrol for cold strip mill [J]. Nippon Steel Technical Report , 1991, 49(4): 59-62.
［7］张晓峰,王哲,王国栋，等,热连轧精轧机组的模糊动态设定[J].钢铁研究学报,2006,12(3):22-26.Zhang Xiaofeng,Wang Zhe, Wang Guodong,et al. Fuzzy dynamic setting technology for hot strip mill[J]. Journal of Iron and Steel Research,2006,12(3):22-26.
［8］日本钢铁协会.板带轧制理论与实践[M].王国栋,吴国良,译. 北京:中国铁道出版社,1990.Japanese Steel Association. Practice and Theory of Strip Rolling [M]. Translated by:Wang Guodong, Wu Guoliang. Beijing: China Railway Publishing House, 1990.
［9］张国良, 曾静, 柯熙政, 等. 模糊理论及其Matlab应用[M].西安:西安交通大学出版社, 2002.Zhang Guoliang, Zeng Jing, Ke Xizheng, et al. Fuzzy theory and application of Matlab[M] . Xian:Xian Jiao Tong University Press, 2002.

服务与反馈：

【文章下载】【加入收藏】