锻压技术

基于数值模拟的小应变差筒形件旋压成形方法研究

英文标题：Study on spinning methods of cylinders with small strain difference based on numerical simulation

作者：曾超夏琴香肖刚锋谢红希

单位：华南理工大学

分类号：

出版年,卷(期):页码：2014,39(4):36-41

摘要：

为了获得变形均匀的筒形件，提出采用有限元数值模拟方法对错距旋压、等距旋压和对轮旋压三种强力旋压成形工艺方案进行分析，介绍了三种强力旋压成形工艺方法及其原理，并制定了相应的成形工艺方案。以20钢筒形件为研究对象，采用MSC.MARC有限元软件，对三种不同的强力旋压成形过程进行了数值模拟。结果表明，旋压成形后工件的内外表面存在一定的应力及应变差；采用对轮旋压所获得筒形件内外表面应力应变差远小于错距旋压及等距旋压，采用等距旋压成形时筒形件内外表面应力应变差最大。

To obtain the uniformly deformed cylinders, three kinds of power spinning methods, such as the stagger spinning, isometric spinning and counter-roller spinning were analyzed based on the finite element numerical simulation. The principles of three kinds of power spinning methods were introduced and the corresponding technology programs were designed according to their different characteristics. Taken the 20 steel cylinders as the researching object, the processes of three kinds of spinning methods were simulated by the finite element analysis software MSC.MARC. The results show that the distributions of equivalent stress and equivalent strain are non-uniform between the inner and outer surfaces of the spun workpiece; the differences of stress and strain obtained by the counter-roller spinning are far less than that of the stagger spinning and isometric spinning, and the differences of stress and strain obtained by the isometric spinning are the maximum.

基金项目：

国家自然科学基金资助项目（51075153）；广东省自然科学基金资助项目（10151040301000000）

曾超（1987-），男，硕士研究生

参考文献：

[1]胡昱，夏琴香，王玉辉，等. 旋压技术在国防建设中的应用[A]. 全国第十届旋压技术交流大会论文集[C].太原，2005.

Hu Yu, Xia Qinxiang, Wang Yuhui, et al. Spinning technology in national defence construction application[A]. The National Tenth Spinning Technology Exchange Conference Proceedings[C].Taiyuan, 2005.

[2]夏琴香, 张鹏, 程秀全, 等. 筒形件错距旋压成形工艺参数的正交试验研究[J].锻压技术，2012，37(6)：42-46.

Xia Qinxiang, Zhang Peng, Cheng Xiuquan, et al.Orthogonal experimental study on forming process parameters of tube stagger spinning[J]. Forming & Stamping Technology, 2012,37(6):42-46.

[3]杨保健，夏琴香，张鹏，等. SPD制备纳米/超细晶金属材料的成形方法[J].锻压技术,2011,36（2）：48-52.

Yang Baojian, Xia Qinxiang, Zhang Peng, et al.Forming method of ultra-fine grain/nanocrystalline metallic material based on SPD[J].Forming & Stamping Technology, 2011, 36（2）：48-52.

[4]Zhang Fan, Zhang Kexiang, Tan Chengwen, et al.Microstruc-ture and mechanical properties of Mg-Gd-Y-Zr alloy processed by equal channel angular pressing[J]. Transactions of Nonferrous Metals Society of China, 2011, 21(10): 2140-2146.

[5]杨保健，夏琴香，程秀全，等. 纳米／超细晶筒形件强力旋压变形机理[J]. 华南理工大学学报：自然科学版，2013,41(3)：90-94.

Yang Baojian, Xia Qinxiang, Cheng Xiuquan, et al. Deformation mechanism of nano/ultrafine grained cylindrical parts fabricated by power spinning[J].Journal of South China University of Technology：Natural Science Edition，2013,41(3)：90-94.

[6]王成和，刘克璋.旋压技术[M].北京：机械工业出版社，1986

Wang Chenghe,Liu Kezhang. Spinning Technology[M].Beijing:China Machine Press，1986，

[7]程秀全，吴万敏，张鹏，等筒形件错距旋压成形工艺参数优化[J]. 塑性工程学报,2012,19（5）：104-108.

Cheng Xiuquan, Wu Wanmin, Zhang Peng, et al.Optimization of process parameters for tubular parts stagger spinning[J].Journal of Plasticity Engineering, 2012,19（5）：104-108.

[8]肖作义，张涛. 对轮旋压的刚塑性有限元分析[J].锻压技术，1999，（1）：27-30.

Xiao Zuoyi, Zhang Tao. Rigid-plastic finite element analysis of opposite roller spinning[J].Forming & Stamping Technology,1999,(1): 27-30.

[9]夏琴香，杨明辉，陈家华，等.工艺参数对杯形内啮合齿轮旋压成形影响的数值模拟研究[J]. 塑性工程学报，2006，13（4）：1-5.

Xia Qinxiang, Yang Minghui, Chen Jiahua, et al. Numerical simulation of the influence of the processing parameters on the spin-forming of the inner meshing gear of cups[J].Journal of Plasticity Engineering,2006,13(4):1-5.

服务与反馈：

【本网站尚未开通全文下载服务】【加入收藏】