锻压技术

基于ABAQUS的冷镦机各工位动力学分析

英文标题：Dynamic simulation of cold headers each station based on ABAQUS

作者：袁龙江戴春祥李莉敏

单位：上海大学

关键词：冷镦机凹穴六角头螺栓 ABAQUS

分类号：

出版年,卷(期):页码：2014,39(4):84-87

摘要：

冷镦机各工位的冷镦力计算为冷镦机各部件的设计提供重要的设计参数。传统的冷镦力计算可以通过经验公式或实验得到，经验公式简单但是不精确，实验方式精确但是需要花费大量的时间以及人力、物力。基于有限元软件ABAQUS对冷镦机在镦制6 mm凹穴六角头螺栓时的各工位进行动力学分析，求得静模中各工位材料对动模的应力以及反作用力，然后把各工位的反作用力进行叠加，得到冷镦机镦制6 mm凹穴六角头螺栓时的最大冷镦力。

Cold upsetting force calculation of cold header provides important design parameters for each component of cold header. The traditional cold upsetting force calculation is obtained by empirical formula or experiment, and the empirical formula is simple but not precise, while the experiment is precise but needs a lot of manpower and time. With the help of ABAQUS, the dynamic analysis of each station when 6 mm recessed hexagon head bolts were made by cold header was carried out，and the stress and reactive force of each station on moving die in static casting were gained, then the reactive force of each station was overlaid together, consequently, the maximum cold heading force when 6 mm recessed hexagon head bolts were made by cold header was gained.

基金项目：

国家科技重大专项(04专项)“高速精密多工位冷镦成形成套装备”（2013ZX0400208）

袁龙江（1988-），男，硕士研究生

参考文献：

[1]米苏日尼可夫.金属冷镦工艺学[M].北京：中国工业出版社,1964.

Missourinikov.Metal Cold Heading Technology[M].Beijing:China Industry Press,1964.

[2]上海市机械配件工业公司.多工位冷镦工艺[M].北京：机械工业出版社，1975.

Shanghai Machinery Accessories Industrial Company. Multi-station Cold Heading Process[M].Beijing: China Machine Press,1975.

[3]庄茁.基于ABAQUS的有限元分析和应用[M].北京：清华大学出版社，2009.

Zhuang Zhuo. Finite Element Analysis and Application Based on ABAQUS[M].Beijing: Tsinghua University Press,2009.

[4]肖业兴，马铁军.金属薄板冲压成形的有限元模拟研究[J].锻压技术，2012，37（1）：165-168.

Xiao Yexing，Ma Tiejun. FEM simulation of sheet metal stamping[J].Forging & Stamping Technology, 2012,37(1):165-168.

[5]秦为前，王栓虎，解德乾，等.基于AMAMS和ANSYS的高速冲床执行机构动态仿真分析[J].锻压技术，2011，36（6）：159-162.

Qin Weiqian，Wang Shuanhu，Xie Deqian,et al. Dynamic simulation of high-speed punch actuator based on ADAMS and ANSYS[J]. Forging & Stamping Technology, 2011,36(6):159-162.

服务与反馈：

【本网站尚未开通全文下载服务】【加入收藏】