锻压技术

基于UG的复杂空心铝型材平面分流组合模CAD系统

英文标题：CAD system of porthole dies for complex hollow aluminum profiles based on UG software

作者：刘惠赵国群马志锋王浩

分类号：TG376

出版年,卷(期):页码：2014,39(5):137-143

摘要：

研究铝型材平面分流组合模的设计流程和关键技术，运用反推分析法，从模具结构向工艺参数反推，确定设计流程中的关键点，并使其模块化，构建平面分流组合模CAD系统总体框架。通过分析模具结构的实体建模方法，提出各个模块的具体设计方法。基于UG/Open API和UG/Open Grip，对UG的基础功能进行集成，采用UF对象模型进行逐步建模，实现平面分流组合模CAD系统设计。实例表明，采用该系统可较为方便地设计出复杂空心铝型材平面分流组合模。

The design processes and key technologies of porthole dies were investigated. The key points of design process were determined and modulated by using the back-stepping analysis method from the die structure inverse to process parameters. The whole framework of CAD system of porthole dies was then built. The specific design ideas of each module were also presented by analyzing the modeling approach of die structure. A CAD system of porthole dies was developed based on UG/Open API and UG/Open Grip to integrate the UGs basic functions and by using step-by-step modeling of UF object model. The design example shows that porthole dies can be designed conveniently by using this system.

基金项目：

国家自然科学基金资助项目（51375270）

刘惠（1987-），男，硕士研究生，助理工程师

参考文献：

［1］李灼华，陈泽中，王美艳，等. 空心铝型材分流组合挤压模CAD系统开发[J]. 模具工业，2009，35(9):17-21.Li Zhuohua, Chen Zezhong, Wang Meiyan, et al. Development of CAD System of porthole extrusion die[J]. Die & Mould Industry, 2009,35(9):17-21.
［2］廖培根，方刚，曾攀，等. 基于UG的铝型材挤压模具CAD设计系统[J]. 锻压技术，2008，33(4):164-167.Liao Peigen, Fang Gang, Zeng Pan, et al. CAD system of the extrusion dies to produce aluminum profile based on UG system[J]. Forging & Stamping Technology, 2008,33(4):164-167.
［3］王彦菊，方刚，吴锡坤，等. 基于UG的铝型材挤压分流模设计KBE系统[J]. 模具工业，2010，36(7):62-66.Wang Yanju, Fang Gang, Wu Xikun, et al. UG-based KBE system for the design of extrusion porthole dies for aluminum profile[J]. Die & Mould Industry, 2010,36(7):62-66.
［4］叶南海，贺晓华，韦林，等. 基于CAD/ CAE 的铝型材挤压模具智能设计[J]. 湖南大学学报，2009，36(6):28-31.Ye Nanhai, He Xiaohua, Wei Lin, et al. Intelligent design of aluminum extrusion dies based on CAD/CAE[J]. Journal of Hunan University, 2009,36(6):28-31.
［5］马建哲，王红志，李积彬. 铝型材挤压分流模三维CAD技术应用研究[J]. 工程图学学报，2011,(4):1-7.Ma Jianzhe, Wang Hongzhi, Li Jibin. A study of the 3D CAD technology of aluminum profiles porthole extrusion dies for engineering application[J]. Journal of Engineering Graphics, 2011,(4):1-7.
［6］傅立军，包忠诩，陈泽中，等. 基于UG平台构建三维铝型材挤压模具CAD系统[J]. 金属成形工艺，2003,21(3): 52-55.Fu Lijun, Bao Zhongxu, Chen Zezhong, et al. Building the CAD system for extrusion dies of aluminum profile based on UG software[J]. Metal Forming Technology, 2003,21(3): 52-55.
［7］蒋焘，陈国学，吴森. 空心铝型材挤压过程计算机仿真系统[J]. 塑性工程学报，2005,12(2): 73-77.Jiang Tao, Chen Guoxue, Wu Sen. The development of a computer simulation system for hollow aluminum profile extrusion dies[J]. Journal of Plasticity Engineering, 2005,12(2): 73-77.
［8］刘惠. 复杂空心铝型材平面分流组合模CAD系统实用化研究[D].济南：山东大学，2012.Liu Hui. Practical Development of CAD System of Porthole Dies for the Hollow Complex Aluminum Profiles[D]. Jinan：Shandong University，2012.
［9］侯永涛，丁向阳. UG/Open二次开发与实例精解[M].北京:化学工业出版社，2007.Hou Yongtao, Ding Xiangyang. UG/Open Second Development and Examples Explaining[M]. Beijing: Chemical Industry Press, 2007.
［10］莫蓉. 图表详解UG NX二次开发[M]. 北京:电子工业出版社, 2008.Mo Rong. Examples and Charts to Explain UG NX Second Development[M]. Beijing: Electronics Industry Press, 2008.
［11］黄勇, 张博林, 薛运峰. UG二次开发与数据库应用基础与典型范例[M]. 北京:电子工业出版社, 2008.Huang Yong, Zhang Bolin, Xue Yunfeng. UG Second Development and Database Application Foundation and Typical Examples[M]. Beijing: Electronics Industry Press, 2008.
［12］王庆林. UG/Open GRIP实用编程基础[M].北京:清华大学出版社，2002.Wang Qinglin. UG/Open GRIP Practical Basic Programming [M]. Beijing: Tsinghua University Press, 2002.
［13］刘静安. 铝型材挤压模具设计、制造、使用及维修[M].北京:冶金工业出版社，2002.Liu Jingan. Design, Mmanufacturing, Using and Repairing of Aluminum Profile Extrusion Dies[M]. Beijing: Metallurgical Industry Press, 2002.

服务与反馈：

【本网站尚未开通全文下载服务】【加入收藏】