锻压技术

摩擦行为在锻造过程中的研究现状与进展

英文标题：Developments and prospects of friction behavior during forging process

作者：李卫旗马庆贤

单位：清华大学

分类号：TG316

出版年,卷(期):页码：2014,39(6):9-19

摘要：

锻造过程中的摩擦行为是一种多物理场的复杂耦合过程，与接触表面的硬度、润滑状态、接触应力和应变速率等特性有关，其对锻造精度控制、金属流动甚至组织演变起着至关重要的影响。锻造过程中摩擦行为极为复杂，难于对其准确测定和建模分析，致使目前该方面的研究相对较少。本文系统分析了影响锻造过程中摩擦状态的主要因素，概括总结目前锻造成形中常用的摩擦表示模型；从锻造过程中摩擦学研究、摩擦行为对锻造质量的机理研究以及摩擦数值模拟三方面对当前摩擦行为在锻造过程中的研究现状进行综述；最后对锻造过程中摩擦行为研究提出展望。

It is a complex multi-physics coupling process for the friction behavior during forging process, which associates with the hardness of contact surface, lubrication condition, contact stress and strain rate and plays an important effect on precision control of forging, metal flow and even organization evolution. The complexity of friction behavior during forging process makes it difficult to be accurately measured and modeled, the systematic study of which is relatively few. The main factors influencing friction state during forging process were analyzed systematically, and common friction models used in forging were generally summarized. Current status of friction behavior research during forging process was reviewed in the ways of tribology in forging process, mechanism of the forging quality influenced by friction behavior and friction numerical simulation. Finally, outlooks of friction behavior research of forging process was put forward.

基金项目：

国家科技重大专项资助项目(2011ZX04014-051)；国家重点基础研究发展计划资助项目(2011CB012903)

参考文献：

［1］温诗铸，黄平. 摩擦学原理[M]. 北京：清华大学出版社，2012.Wen Shizhu, Huang Ping. Principles of Tribology[M]. Beijing：Tsinghua University Press, 2012.
［2］汪大年. 金属塑性成形原理[M]. 北京：机械工业出版社，1982.Wang Danian. Principles of Metal Plastic Forming[M]. Beijing：China Machine Press, 1982.
［3］韩志仁，陶华. 基于有限元分析的摩擦系数测定[J]. 锻压技术，2008，33(1)：136-138.Han Zhiren, Tao Hua. Determination of friction coefficient based on finite element analysis[J]. Forging & Stamping Technology, 2008, 33(1)：136-138.
［4］茹铮，余望，阮煦寰，等. 塑形加工摩擦学[M]. 北京：科学出版社，1992.Ru Zheng, Yu Wang, Ruan Xuhuan, et al. Tribology of Plastic Working[M]. Beijing：Science Press, 1992.
［5］赵振铎，邵明志，张召泽，等. 金属塑性成形中的摩擦与润滑[M]. 北京：化学工业出版社，2004.Zhao Zhenduo, Shao Mingzhi, Zhang Zhaoze, et al. Friction & Lubrication of Metal Plastic Forming[M]. Beijing：Chemical Industry Press, 2004.
［6］Altan T, Oh S, Gegel H L. Metal Forming：Fundamentals and Applications[M]. Ohio: American Society for Metals, 1983.
［7］Lange K. Handbook of Metal Forming[M]. New York：McGraw- Hill, 1985.
［8］秦敏，曲周德，刘建生，等. 大型锻造过程数值模拟中摩擦模型的研究动态[J]. 大型铸锻件，2008,(2)：42-45.Qin Min, Qu Zhoude, Liu Jiansheng, et al. Research development on friction model of numerical simulation in heavy forging process[J]. Heavy Casting and Forging, 2008(2)：42-45.
［9］扶名福，郭良，陈桂尧. 非局部摩擦在塑性加工中的应用[J]. 力学，2001，22(1)：112-116.Fu Mingfu, Guo Liang, Chen Guiyao. An application of nonlocal friction in plastic working problems[J]. Chinese Quarterly of Mechanics, 2001, 22(1)：112-116.
［10］林治平. 上限法在塑性加工工艺中的应用[M]. 北京：中国铁道出版社，1991.Lin Zhiping. Application of Upper Bound Method in Plastic Forming Processing[M]. Beijing：China Railway Publishing House, 1991.
［11］Kobayashi S, Oh S, Altan T, et al. Metal Forming and the Finite Element Method[M]. New York：Oxford University Press, 1989.
［12］Oden J T, Pires E B. Nonlocal and nonlinear friction laws and varational principles for contact problems in elasticity[J]. Journal of Applied Mechanics, 1983, (50)：67-76.
［13］吴勇国，李尚健，李志刚，等. 板料成形中的大变形接触问题的有限元解法[M]. 华中理工大学学报，1996，24(1)：64-67.Wu Yongguo, Li Shangjian, Li Zhigang, et al. A finite element analysis on the contact of large deformation in sheet metal forming[J]. J. Huazhong UNIV. of Sci. & Tech., 1996, 24(1)：64-67.
［14］Oden J T, Pires E B. Algorithms and numerical results for finite element approximations of contact problems with non-classical friction laws[J]. Computers & Structures, 1984, 19(1-2)：137-147.
［15］Zhong Z H. Finite Element Procedures for Contact-Impact Problems[M]. New York：Oxford University Press, 1993.
［16］Doege E, Bederna C. Analysis of Boundary Stresses and Temperatures in Hot Massive Forming[M]. Munich: Carl Hanser Verlag, 1996.
［17］Bernhardt R. A Contribution to the Experimental and Numerical Analysis of Local Contact Stresses and Contact Temperatures in the Active Joint of die with Special Considering the Boundary Friction Problems[D]. Freiberg：TU Bergakademie Freiberg, 1998.
［18］Neumaier T. To Optimize the Process Selection of Cold, Half-Warm and Warm Massive Forming Procedures[D]. Hannover：Hannover University, 2003.
［19］Alasti M. Modelling of Friction and Heat Transfer in the FEM Simulation of Warm Massive Forming Processes[D]. Hannover：Hannover University, 2008.
［20］Behrens B A, Bouguecha A, Hadifi T, et al. Advanced friction modeling for bulk metal forming processes[J]. German Academic Society for Production Engineering, 2011, 5：621-627.
［21］А·Л·格鲁捷夫，Ю·В·吉利贝格，В·Т·季里克. 焦明山，袁瑞琛译. 金属压力加工中的摩擦和润滑手册[M]. 北京：航空工业出版社，1990.Gruev A L, Zulbere Y V, Tuluk V T. Engineering Theory of Plasticity[M]. Translated by:Jiao Mingshan, Yuan Ruichen. Beijing：Aviation Industry Press, 1990.
［22］Kunogi, M. On plastic deformation of hollow cylinders under axial compressive loading[J]. Rep. Scient. Res. Inst. (Tokyo), 1954, 2(30): 63-92.
［23］Male A T, Cockcroft M G. A method for the determination of the coefficient of friction of metals under condition of bulk plastic deformation[J]. J. Inst. Metals, 1964,93：38-46.
［24］Depierre V, Gurney F, Male A T. Mathematical Calibration of the Ring Test with Bulge Formation[M]. Springfield：National Technical Information Service, 1972.
［25］Male A T. Variation in friction coefficient of metals during compressive deformation[J]. J. Inst. Metals, 1966, （94）：121-125.
［26］Male A T. Determination coefficient of friction during compressive deformation[A]. Symposium on Experimental Methods in Tribology[C]. America,1968.
［27］Male A T, Depierre V. The validity of mathematical solutions for determining friction from the ring compression test[J]. J. Lubrication Tech, 1970,92：389- 397.
［28］Male A T, Depierre V, Saul G. The relative validity of concept of coefficient and interface friction shear factor for use in metal deformation studies[J]. ASLE Trans., 1972, 16：177-184.
［29］郭正华，李志刚，黄重九，等. 塑性成形过程摩擦测试的研究进展[J]. 塑性工程学报，2004，11(3)：1-6.Guo Zhenghua, Li Zhigang, Dong Chongjiu, et al. Research progress of friction measurement in plastic forming[J]. Journal of Plasticity Engineering, 2004, 11(3)：1-6.
［30］Avitzur B. Metal Forming：Processes and Analyses[M]. New York：Mc Graw-Hill, 1968.
［31］Petersen S B, Martins Paf, Bay N. An alternative ring-test geometry for the evaluation of friction under low normal pressure[J]. Journal of Materials Processing Technology, 1998, 79：14-24.
［32］Tan X, Martins Paf, Baya N. Friction studies at different normal pressures with alternative ring-compression tests[J]. Journal of Materials Processing Technology, 1998, 80-81：292-297.
［33］Malayappan S, Narayanasamy R. An experimental analysis of upset forging of aluminium cylindrical billets considering the dissimilar frictional conditions at flat die surfaces[J]. International Journal of Advanced Manufacturing Technology, 2004, 23(9-10)：636-643.
［34］Manisekar K, Narayanasamy R. Effect of friction on barrelling in square and rectangular billets of aluminium during cold upset forging[J]. Materials & Design, 2007, 28(2)：592-598.
［35］Bay N, Wanheim T. Real area of contact and friction stress at high pressure sliding contact[J]. Wear, 1976, 38(2)：201-209.
［36］Petersen S B, Martins Paf, Bay N. Friction in bulk metal forming：a general friction model vs. the law of constant friction[J]. Journal of Materials Processing Technology, 1997, 66(1-3)：186-194.
［37］Lin S Y. An investigation of die workpiece interface friction during the upsetting process[J]. Journal of Materials Processing Technology, 1995, 54(1-4)：239-248.
［38］Azushima A, Yoneyama S, Utsunomiya H. Coefficient of friction at interface of lubricated upsetting process[J]. Wear, 2012, 286-287：3-7.
［39］Im Y T, Kang S H, Cheon J S. A novel technique of friction and material property measurement by tip test in cold forging[J]. Proceedings of the Institution of Mechanical Engineers Part B：Journal of Engineering Manufacture, 2006, 220(1)：81-90.
［40］Ajiboye J S, Jung K H, Im Yt. Sensitivity study of frictional behavior by dimensional analysis in cold forging[J]. Journal of Mechanical Science and Technology, 2010, 24(1)：115-118.
［41］Becker R, Jeon H J, Chang C C, et al. A geometric approach to modelling friction in metal forming[J]. CIRP Annals-Manufacturing Technology, 2003, 52(1)：209-212.
［42］Shen G, Vedhanayagam A, Kropp E, et al. A method for evaluating friction using a backward extrusion-type forging[J]. Journal of Materials Processing Technology, 1992, 33(1-2)：109-123.
［43］Buschhausen A, Weinmann K, Lee J Y, et al. Evaluation of lubrication and friction in cold forging using a double backward-extrusion process[J]. Journal of Materials Processing Technology, 1992, 33(1-2)：95-108.
［44］Sagisaka Y, Ishibashi I, Nakamura T, et al. Evaluation of environmentally friendly lubricants for cold forging[J]. Journal of Materials Processing Technology, 2012, 212(9)：1869-1874.
［45］Li Y P, Onodera E, Chiba A. Evaluation of friction coefficient by simulation in bulk metal forming process[J]. Metallurgical and Materials Transactions A-physical Metallurgy and Materials Science, 2010, 41A(1)：224-232.
［46］林治平. 在锻压生产条件下测定塑性变形摩擦系数-关于圆环镦粗法应用的研究[J]. 南昌大学学报：工科版，1979，（4）：51-65.Lin Zhiping. Determination of friction coefficient of plastic deformation in the forging production conditions-research of applications to ring upsetting[J]. Journal of Nanchang University:Engineering & Technology Edition, 1979,（4）：51-65.
［47］秦敏. 大型锻造过程接触摩擦机理及变化规律的研究[D]. 太原：太原科技大学，2008.Qin Min. Research of Friction Mechanism and Variation Law During Forming Process of Heavy Forging[D]. Taiyuan：Taiyuan University of Science and Technology, 2008.
［48］黄艳伟，王忠金. 基于MSC.SuperForm的的金属体积成形数值模拟摩擦模型的二次开发[J]. 锻压技术，2012，37(4)：112-116.Huang Yanwei, Wang Zhongjin. Redevelopment of friction model in the numerical simulation of bulk metal forming process based on MSC.SuperForm[J]. Forging & Stamping Technology, 2012, 37(4)：112-116.
［49］Е·П·翁克索夫.塑性的工程理论[M]. 秦开宗，译.北京：科学出版社，1963.Unksov E N. Engineering Theory of Plasticity[M]. Translated by: Qin Kaizong. Beijing：Science Press, 1963.
［50］Pawelski O, Rasp W, Wolff C. Analysis of the asymmetric upsetting test with extremely high strain rate as tool for friction measurement[J]. Journal of Materials Processing Technology, 1998, 80-81：287-291.
［51］Wang S L, Ramaekers J. Measurement of friction and material flow-stress by a plane-strain compression tribometer[J]. Journal of Materials Processing Technology, 1996, 57(3-4)：345-350.
［52］Azushima A. In situ 3D measurement of lubrication behavior at interface between tool and workpiece by direct fluorescence observation technique[J]. Wear, 2006, 260(3)：243-248.
［53］田成达，唐鼎，李大永，等. 一种摩擦系数的测量方法及其在数值模拟中的应用[J]. 塑性工程学报，2008，15(5)：53-56,61.Tian Chengda, Tang Ding, Li Dayong, et al. A testing method of friction coefficient and its application in numerical simulation[J]. Journal of Plasticity Engineering, 2008, 15(5)：53-56,61.
［54］С·И·古勃金. 金属塑性变形：第一卷[M]. 张忞，译. 北京：机械工业出版社，1963.Gubkin S I. Metal Plastic Forming:the First Volume[M]. Translated by: Zhang Wen. Beijing：China Machine Press, 1963.
［55］Lee C H, Altan T. Influence of flow stress and friction upon metal flow in upset forging of rings and cylinders[J]. Journal of Engineering for Industry, 1972, 94(3)：775-782.
［56］Paukerta R, Lange K. Investigations into metal flow in radial-forging[J]. CIRP Annals-Manufacturing Technology, 1983, 32(1)：211-214.
［57］Gomide H A, Burger C P.3-Dimensional strain distributions in upset rings by photoplastic simulation[J]. Experimental Mmechanics, 1981, 21(10)：361-370.
［58］Baskaran K, Narayanasamy R, Arunachalam S. Effect of friction factor on barrelling in elliptical shaped billets during cold upset forging[J]. Journal of Materials Science, 2007, 42(18)：7630-7637.
［59］Narayanan R G, Gopal M, Rajadurai A. Influence of friction in simple upsetting and prediction of hardness distribution in a cold forged product[J]. Journal of Testing and Evaluation, 2008, 36(4)：1-13.
［60］任运来，朱磊，聂绍珉，等. 大型锻件锻造镦粗表面无开裂条件[J]. 中国机械工程，2009，20(8)：883-886.Ren Yunlai, Zhu Lei, Ni Shaomin, et al. On upsetting conditions of large forgings without cylinder surface cracking[J]. China Mechanical Engineering, 2009, 20(8)：883-886.
［61］吕炎，王真，姜秋华，等. 平板压缩时金属流动方向的实验研究[J]. 金属科学与工艺，1985，4(1)：62-69.Lv Yan, Wang Zhen, Jiang Qiuhua, et al. An experimental research on the flow direction of metal upsetting between two flat dies[J]. Metal Science & Technology, 1985, 4(1)：62-69.
［62］潘红波，唐荻，胡水平，等. 平面应变过程中摩擦对金属流变规律的影响[J]. 北京科技大学学报，2008，30(11)：1266-1269,1281.Pan Hongbo, Tang Di, Hu Shuiping, et al. Effect of friction on metallic rheology during plane strain compression[J]. Journal of University of Science and Technology Beijing, 2008, 30(11)：1266-1269,1281.
［63］Zienkiewicz O C, Taylor R L, Nithiarasu P. The Finite Element Method：Solid Mechanics[M]. Oxford：Butterwort-Heinemann, 2000.
［64］Yoon J H, Yang D Y. Rigid-plastic finite element analysis of three-dimensional forging by considering friction on continuous curved dies with initial guess generation[J]. International Journal of Mechanical Sciences, 1988, 30(12)：887-898.
［65］Oh S I. Finite element analysis of metal forming processes with arbitrarily shaped dies[J]. International Journal of Mechanical Sciences, 1982, 24(8)：479-493.
［66］Hartley P, Sturgess C E N, Rowe G W. Influence of friction on the prediction of forces, pressure distributions and properties in upset forging[J]. International Journal of Mechanical Sciences, 1980, 22(12)：743-753.
［67］Burte P R, Im Y T, Altan T. Measurement and analysis of heat transfer and friction during hot forging[J]. Journal of Engineering for Industry, 1990, 112(4)：332-339.
［68］Behrens B A, Schafstall H. 2D and 3D simulation of complex multistage forging processes by use of adaptive friction coefficient[J]. Journal of Materials Processing Technology, 1998, 80-81：298-303.
［69］Behrens B A, Bouguecha A, Hadifi T, et al. Advanced friction modeling for bulk metal forming processes[J]. Production Engineering, 2011, 5(6)：621-627.
［70］Coppieters S, Lava P, Sol H, et al. Determination of the flow stress and contact friction of sheet metal in a multi-layered upsetting test[J]. Journal of Materials Processing Technology, 2010, 210(10)：1290-1296.
［71］Joun M S, Moon H G, Choi I S, et al. Effects of friction laws on metal forming processes[J]. Tribology International, 2009, 42(2)：311-319.
［72］路平，赵国群，管延锦，等. 摩擦条件对圆环镦粗变形规律影响的无网格伽辽金数值模拟研究[J].锻压装备与制造技术，2008,43(4)：75-79.Lu Ping, Zhao Guoqun, Guan Yanjin, et al. The element free galerkin method numerical simulation study about frictional effects on the ring compression process[J]. China Metal Forming Equipment & Manufacturing Technology, 2008,43(4)：75-79.
［73］肖宏，张海霞，袁国明. 无网格法标定圆柱体压缩过程摩擦系数研究[J]. 锻压技术，2007,33(6)：129-131.Xiao Hong, Zhang Haixia, YUAN Guoming. Research on determining friction factor in column compression by meshless method[J]. Forging & Stamping Technology, 2007,33(6)：129-131.
［74］Zhu Y C, Zeng W D, Ma X, et al. Determination of the friction factor of Ti-6Al-4V titanium alloy in hot forging by means of ring-compression test using FEM[J]. Tribology International, 2011, 44(12)：2074-2080.
［75］汪宇，刘郁丽，杨合. TC4叶片精锻过程中摩擦对模具应力及温度场的影响[J]. 中国有色金属学报，2010,20(1)：452-456.Wang Yu, Liu Yuli, Yang He. Influence of friction on stress and temperature flieds of die in TC4 blade forging process[J]. The Chinese Journal of Nonferrous Metals, 2010,20(1)：452-456.
［76］许树勤，陈志英，张善元. 镦粗试验中鼓度与摩擦的相关性研究[J]. 锻压技术，2004,29(5)：46-48.Xu Shuqin, Chen Zhiying, Zhang Shanyuan. Research on the relation between bulging and friction in cyl inder upsetting[J]. Forging & Stamping Technology, 2004,29(5)：46-48.

服务与反馈：

【文章下载】【加入收藏】