锻压技术

变厚板材料模型表征方法的比较研究

英文标题：Comparison study of description methods for material model of variable-thickness rolled blank

作者：吴昊杨兵高永生蒋浩民

分类号：TG386

出版年,卷(期):页码：2014,39(6):37-40

摘要：

针对变厚板板厚非均一性的特点，为建立相对准确的变厚板材料模型，基于变厚板数字散斑单向拉伸试验和不同厚度应力应变曲线的计算，提出了整体法和分段法的表征方法。在分段法中，对过渡区分别采用了离散、插值和平均法进行表征。并将这些方法分别应用到变厚板单向拉伸仿真模拟中，对比试验和仿真的力-位移曲线差异性，结果显示，采用分段法得到的仿真数据更接近试验数据，因此变厚板的材料模型采用分段法表征更合理。

Since variable-thidcness rolled blank(VRB) owns the characteristic of non-uniform thickness, in order to describe material model of VRB accurately, overall methods and segmentation methods were put forward based on digital image correlation (DIC) tensile test of VRB and stress-strain curve calculation under different thicknesses. There are three ways, which is interpolation, discretization and average among segmentation methods to deal with transition zone of VRB. All these methods were applied to numerical simulation of VRB, and the force-displacement curves acquired from real test and simulation were compared. The results show that simulation data of segmentation method are more closer to experimental data, which is reasonable to describe material model of VRB.

基金项目：

汽车轻量化技术创新战略联盟开放课题（QYY-KT-2013-003）

参考文献：

［1］Hauger. Tailor Rolled Blanks for Automotive Lightweight Engineering [R]. Frankfurd: Automotive Circle International Conference，2008.
［2］杜继涛. TRB轧制建模及其在汽车覆盖件上应用的关键技术[D]. 上海：同济大学，2008.Du Jitao. Rolling Model of TRB and Its Key Technology When Applied to Automobile Cover [D]. Shanghai：Tongji University，2008.
［3］Friedrich O. Untersuchungen der Tiefziehsimulationen von Flexibel Gewalzten Prinzipbauteilen Aus St14 dem Programmsystem LS-DYNA [D]. Aachen：IBF，RWTH Aachen，1999.Friedrich O. Deep Drawing Simulation Study of St14 Flexible Rolled Blanks in LS-DYNA [D]. Aachen: IBF, RWTH Aachen, 1999.
［4］Wiedner C. Finite-Elemente Simulation des Streckziehens von Tailor Rolled Blanks [D]. Aachen：IBF，RWTH Aachen，2000.
［5］Meyer A， Wietbrock B，Hirt G. Increasing of the drawing depth using tailor rolled blanks-Numerical and experimental analysis[J]. International Journal of Machine Tools & Manufacture，2008，48：522-531.
［6］Kopp R， Wiedner C， Meyer A. Flexibly rolled sheet metal and its use in sheet metal forming [J]. Advanced Materials Research，2005，6-8：81-92.
［7］包向军. 变截面薄板弯曲成形回弹的实验研究和数值模拟[D]. 上海：上海交通大学，2003.Bao Xiangjun. Experimental Investigation and Numerical Simulation of Springback in Tailor Rolled Blanks Bending[D]. Shanghai：Shanghai JiaoTong University，2003.
［8］姜银方，王勇良，袁国定，等. 连续变截面横梁回弹特性及控制[J]. 机械设计，2010，27(1)：10-13.Jiang Yinfang，Wang Yongliang，Yuan Guoding，et al. Characteristics and control of springback in tailor rolled blanks bending[J]. Journal of Machine Design，2010，27(1)：10-13.
［9］李艳华，杜继涛，费宏斌. 利用ABAQUS与正交试验理论的TRB成形参数优化[J]. 现代制造工程，2009，(11)：136-138.Li Yanhua，Du Jitao，Fei Hongbin. Forming parameters optimization of tailor rolled blanks based on ABAQUS and orthogonal test theory [J]. Modern Manufacturing Engineering，2009，(11):136-138.
［10］张华伟，胡平，刘立忠，等. 影响轧制差厚板冲压成形性能的几何参数研究[J]. 机械设计与制造，2012，(4)：7-9.Zhang Huawei，Hu Ping,Liu Lizhong，et al. Research on geometric parameters affecting stamping formability of tailor rolled blank [J]. Machinery Design & Manufacture，2012，(4)：7-9.
［11］ASTM E8/E8M-2011, Standard Test Methods for Tension Testing of Matallic Materials[S].

服务与反馈：

【本网站尚未开通全文下载服务】【加入收藏】