网站首页期刊简介编委会过刊目录投稿指南广告合作征订与发行联系我们English
基于体积增量均匀释放原则的卸荷规律研究
英文标题:Research on unloading rules based on volume increment uniform release
作者:孙康 吴欣 司玉校 胡川 
单位:江西理工大学 中南大学 
关键词:高压大流量液压系统  卸荷  体积增量 均匀释放 
分类号:TG315
出版年,卷(期):页码:2014,39(6):75-80
摘要:

为了提高高压大流量液压系统卸荷过程中的快速性和平稳性以及降低在卸荷过程中系统的液压冲击,对液压系统卸荷机理进行了理论分析和研究,分析了体积增量均匀释放原则卸荷方法,根据评判卸荷优劣的两个准则——快速性和平稳性,从理论上提出一种基于体积增量均匀释放原则的高压大流量液压系统卸荷方法,通过对系统相关元件的特性分析,推导出卸荷阀芯开启控制曲线。通过仿真将基于体积增量均匀释放原则的卸压阀阀芯开启位移控制曲线与传统控制曲线下的液压卸荷效果进行对比,仿真结果表明,基于体积增量均匀释放原则的卸荷方法卸荷平稳性好,卸荷效果优越,有效地降低了卸荷时的液压冲击,验证了新方法的优越性。

To improve the rapidity and stationarity of high pressure large flow hydraulic system and reduce the hydrodynamic shock during the course of unloading,the mechanism of unloading for hydraulic system was theoretically studied and analyzed. The unloading method on the principle of volume increment uniform release was analyzed. According to the rapidity and stationarity which were the principles to judge unloading system, an unloading method of high pressure large flow hydraulic system based on the principle of volume increment uniform release was theoretically proposed. Besides, the open control curve of unloading valve core was theoretically deduced by analyzing the system components. The hydraulic unloading effect was compared between the open displacement control curve of pressure relief valve core with the traditional control curve through simulation based on the principle of volume increment uniform release. The result shows that the stationarity of the former method is good,the unloading effect is better, and the hydrodynamic shock is reduced effectively, which demonstrates the new superiority of method.

基金项目:
国家科技重大专项资助项目(2009ZX04005-031);国家重点实验室开放基金资助项目(GZKF-201023);江西省自然科学基金资助项目(20122BAB206030)
作者简介:
参考文献:


[1]田辰光.“炮鸣”的产生及其泄压回路[J].中国设备工程,2001,(11):28-29.Tian Chenguang. The produce of “gun sound”  its pressure loop[J]. China Equipment Engineering, 2001,(11):28-29.
[2]Bergant A, Simpson A R, Tijsseling A S. Water hammer with column separation: A historical review[J]. Journal of Fluids and Structures, 2006, 22(2):135-171.
[3]谭建平, 黄长征, 刘彬,等. 瞬变载荷下巨型水压机液压操作控制策略[J]. 机械工程学报, 2008, 44(11): 272-275.Tan Jianping, Huang Changzheng, Liu Bin, et al. Control strategy of hydraulic operation control system under the transient load in giant hydraulic press[J]. Chinese Journal of Mechanical Engineering, 2008, 44(11):  272-275.
[4]黄长征, 谭建平. 300 MN模锻水压机分配阀主阀开启力动态特性[J]. 机械科学与技术, 2010, 29(3): 416-419.Huang Changzheng, Tan Jianping. Dynamic response characteristic of the main valves open force of the distributor spool of a 300 MN die forging hydraulic press[J].Mechanical Science and Technology for Aerospace Engineering, 2010, 29(3): 416-419.
[5]付永领, 祁晓野. AMESim 系统建模和仿真——从入门到精通[M]. 北京: 北京航空航天大学出版社,2006.Fu Yongling, Qi Xiaoye. The AMESim System Modeling and Simulation, from Entry to Master[M]. Beijing: Beijing University of Aeronautics and Astronautics Press,2006.
[6]李壮云.液压气动与液力[M].北京:电子工业出版社,2008.Li Zhuangyun. Hydraulic and Pneumatic[M].Beijing: Publishing House of electronics industry, 2008.
[7]杨怀军,陈国清. 快速锻造液压机液压系统压力冲击的实验研究[J].中国机械工程学报,1994,5(3):14-17.Yang Huaijun, Chen Guoqing,The experiment research of the pressure shock of the fast forging hydraulic press hydraulic system[J].Chinese Journal of Mechanical Engineering,1994,5 (3):14-17.
[8]俞新陆.液压机的设计与应用[M].北京:机械工业出版社,2007.Yu Xinlu. The Design and Application of the Hydraulic Press[M]. Beijing: Mechanical Industry Press,2007.
[9]喻寿益, 汪少军, 贺建军,等. 1万吨多向模锻水压机分配器转角智能控制系统[J]. 中南大学学报: 自然科学版, 2008,44(11):272-275.Yu Shouyi, Wang Shaojun, He Jianjun, et al. Intelligent control system for angle of dispenser in ten-thousand-ton multidirectional die forging hydraulic press [J]. Journal of Central South University: Science and Technology, 2008, 44(11):272-275.
[10]Benedyk,Joseph C. The St. Lou is up and running: universal alloy's 16,200-ton press installed on schedule and in production[J]. Light Metal Age,2005,63(2):24-29.
[11]马宪亭,尹新爱.液压冲击计算与控制方法[J].煤矿机械,2009,30(3):157-158.Ma Xianting, Yin Xinai. Calculation and control methods on hydraulic impact phenomena[J]. Coal Mine Machinery,2009,30(3):157-158.
[12]Sujuan Jiao, Yu Wang, Lei Zhang. Shock wave characteristics of a hydraulic damper for shock test machine[J]. Mechanical Systems and Signal Processing,2010,24(5):1570-1578.
[13]孔晓武,魏建华.大流量插装式伺服阀数学模型及试验验证[J].浙江大学学报:工学版,2007,41(10):1759-1762.Kong Xiaowu, Wei Jianhua. Mathematical model and experimental verification of high flow cartridge servo valve[J]. Journal of Zhejiang University:Engineering Science, 2007, 41(10): 1759-1762.
[14] Hui Cao, Hui Guo. Optimization of PID parameters of hydraulic system of elevating wheelchair based on AMESim[J]. Procedia Engineering, 2011, (15): 3710-3714.
[15]Hao Yan. Mechanical fault diagnosis based on empirical mode decomposition and generalized dimension [J]. Journal of Jilin university:Engineering and Technology Edition, 2012, 42(2):392-396.
[16]Yonqyonq He. Approximate entropy as a nonlinear feature parameter for fault diagnosis in rotating machinery fault [J].Measurement Science & Technology, 2012, 23(4):14-17.
[17]黄长征,谭建平.300 MN模锻水压机动梁驱动系统锻压速度动态响应特性[J].中南大学学报:自然科学版,2008,39(5):1023-1025.Huang Changzheng, Tan Jianping. Dynamic response characteristic of the speed drive system of the hydraulic motor beam of  the  300 MN die forging hydraulic press[J]. Journal of Central South University: Science and Technology,2008,39(5):1023-1025.
[18]谭建平,刘江明,陈辉. 300 MN模锻水压机提升管道液压冲击仿真分析[J].现代制造工程,2011,(3):18-22.Tan Jianping,Liu Jiangming, Chen Hui. Analysis on the ascension pipe hydraulic impact simulation of the  300 MN die forging hydraulic press[J].Modern Manufacturing Engineering,2011,(3):18-22.
[19]司玉校,谭建平,孙康.基于能量均匀释放原则的工作缸卸荷曲线研究[J].锻压技术,2012,37(3):91-94.Si Yuxiao,Tan Jianping,Sun Kang. Research on working cylinder unloading curve based on principle of energy uniform release[J].Forging & Stamping Technology,2012,37(3):91-94.
[20]蒋婷婷,谭建平,司玉校,等. 高压大流量液压系统卸荷规律实验研究[J].锻压技术,2012,37(5):81-82.Jiang Tingting, Tan Jianping, Si Yuxiao, et al. Expermental study on unloading rules in hydraulic system with large flow and high pressure[J]. Forging & Stamping Technology,2012,37(5):81-82.

服务与反馈:
文章下载】【加入收藏
《锻压技术》编辑部版权所有

中国机械工业联合会主管  中国机械总院集团北京机电研究所有限公司 中国机械工程学会主办
联系地址:北京市海淀区学清路18号 邮编:100083
电话:+86-010-82415085 传真:+86-010-62920652
E-mail: fst@263.net(稿件) dyjsjournal@163.com(广告)
京ICP备07007000号-9