锻压技术

钳口凸齿对锻造操作机夹持过程影响的研究

英文标题：Research on the influence of crowned teeth of jaw on forging manipulator gripping process

作者：张文波杨晋高俊峰

关键词：锻造操作机钳口凸齿夹持力

分类号：

出版年,卷(期):页码：2014,39(7):73-77

摘要：

分析了钳口凸齿对锻造操作机夹持力的影响，结果表明表面带凸齿的钳口夹持工件时比平钳口夹持工件更为省力和有效。通过对热工件受挤压时变形情况的分析，确定了热工件的屈服应力；对钳口夹紧工件时的工况进行模型简化和受力分析，得出了钳口表面带凸齿的锻造操作机夹持力计算方法；对300，400 和800 kN锻造操作机进行了实例计算，计算结果证明了计算方法的有效性。

The influence of crowned teeth of jaw on gripping force of forging manipulator was analyzed, and the results show that the jaw with crowned teeth is more effective and labor-saving than the flat jaw when the workpiece is clamped. The yield stress of hot workpiece was determined by analyzing the deformation of squeezed hot workpiece. The simplified model of working condition when the workpiece was clamped by jaws was simplified and corresponding force was analyzed，then the calculated method of gripping force of the forging manipulator with crowned teeth was obtained.The forging manipulators with 300，400，800kN were calculated,and the results show that the calculation method is effective.

基金项目：

国家自然科学基金资助项目（51265022）

张文波（1987-），男，硕士研究生

参考文献：

[1]余发国,高峰,郭为忠,等.锻造操作机的回顾与展望[J].机械设计与研究,2007,(专刊):12-15.

Yu Faguo,Gao Feng,Guo Weizhong,et al.Review and expectation of forging manipulators[J].Journal of Machine Design and Research, 2007,(Special Issue):12-15.

[2]张营杰,卫凌云,牛勇,等.锻造操作机发展现状与研究方向[J]. 锻压装备与制造技术,2012,47（2）:11-14.

Zhang Yingjie,Wei Lingyun,Niu Yong,et al.Present conditionsand research direction of forging manipulator[J].China Metalforming Equipment & Manufacturing Technology,2012,47（2）:11-14.

[3]傅新,徐明,王伟,等.锻造操作机液压系统设计与仿真[J].机械工程学报,2010,46(11):49-54.

Fu Xin,Xu Ming,Wang Wei,et al.Hydraulic systemdesign and simulation of the forging manipulator[J].Journal of Mechanical Engineering,2010,46(11):49-54.

[4]高峰,郭为忠,宋清玉,等.重型制造装备国内外研究与发展[J].机械工程学报,2010,46（19）:92-107.

Gao Feng,Guo Weizhong, Song Qingyu, et al.Current development of heavy-duty manufacturing equipments[J].Journal of Mechanical Engineering,2010,46（19）:92-107.

[5]刘松柏,邓华,何竞飞，等.巨型重载夹持装置动态夹持力建模与承载能力分析[J].现代制造工程,2010,（1）:107-111.

Liu Songbai,Deng Hua,He Jingfei, et al.Dynamic model of the tong force and analysis of load-carrying ability of the large scale heavy-load tong device [J].Modern Manufacturing Engineering,2010,(1):107-111.

[6]孟宪国,冯长儒.锻造操作机钳口夹紧力和夹紧缸能力的计算[J].一重技术,2006,（2）:1-3.

Meng Xianguo,Feng Changru.Jig jaw clamping force and cylinder clamping capacity calculation for forging manipulator [J].CFHI Technology,2006,(2):1-3.

[7]万胜狄,王运赣,沈元彬.锻造机械化与自动化[M].北京:机械工业出版社,1983.

Wan Shengdi,Wang Yungan,Shen Yuanbin. Forging Mechanization and Automation[M].Beijing：China Machine Press,1983.

[8]何琪功,杨晋. 锻造操作机钳口抓取状态的分析与研究[J]. 锻压技术,2013,38（3）:90-94.

He Qigong,Yang Jin.Analysis and research of grabbing condition for forging manipulators jaw[J].Forging & Stamping Technology,2013,38（3）:90-94.

[9]刘艳妍,杨晋,陈超,等.重载锻造操作机夹持力研究[J]. 机械工程学报,2012,48（4）:66-71.

Liu Yanyan,Yang Jin,Chen Chao,et al.Research of the chucking power of the heavy-loaded forging manipulator[J].Journal of Mechanical Engineering,2012,48(4):66-71.

[10]林治平.锻压变形力的工程计算[M].北京：机械工业出版社，1986.

Lin Zhiping.Engineering Computing of Forging Force[M].Beijing:China Machine Press,1986.

服务与反馈：

【本网站尚未开通全文下载服务】【加入收藏】