锻压技术

管夹装配件的自动攻丝级进模设计

英文标题：Design of automated tapping progressive die for pipe clamp fittings

作者：彭一航刘华锋杨元凯

分类号：

出版年,卷(期):页码：2014,39(7):126-132

摘要：

通过分析管夹装配件的结构特点，对其原有冲压工艺进行了改进设计，将单工序模具改进为级进模，将冲压成形与螺纹攻丝集成为一体，实现了多工位级进模自动化生产。介绍了装配件的展开计算方法、模具中攻丝机构的设计、排样设计及主要结构设计要点，解决了小尺寸零件的冲压与攻丝工序“整合”在一起的难题。由原来分离的各攻丝工序改为一个多工位级进模工位，减少了机床和生产工人的数量，提高了生产效率，降低了生产成本。

According to the analysis of structural characteristics for pipe clamp fittings, the design for original stamping process was improved，namely， the single process die was improved to progressive die, the stamping and thread tapping were integrated as a whole, and finally the full automation production of multi-position progressive die was realized. The expansion calculation methods of clamp fittings, tapping mechanism design,layout design and main structural design characteristics for die were introduced, which solved the problem of integration of stamping and tapping for small size parts. Due to that the separation of original tapping process became a workstation with multi-position progressive die, the number of machine tools and production workers are reduced, the production efficiency is improved and the production cost is reduced.

基金项目：

校级科研课题“模内攻丝级进模的研发与设计”(KY2013Q01)

彭一航（1985-），男，硕士，助教

参考文献：

[1]张南，柳玉起,许恒建，等.基于ＦＡＳＴＡＭＰ－ＮＸ的汽车侧梁多工序冲压成形有限元分析[J]. 锻压技术,2012，37(6):33-34.

Zhang Nan,Liu Yuqi,Xu Hengjian，et al. Finite element analysis of the forming of automobile side FASTAMP NX beam based on multi procedure punching[J]. Forging & Stamping Technology,2012， 37(6):33-34.

[2]徐政坤.冲压模具设计与制造[M].北京：化学工业出版社，2003.

Xu Zhengkun. Stamping Die Design and Manufacture[M]. Beijing: Chemical Industry Press，2003.

[3]兰玉祥.挤压丝锥设计及公差标准化[J].航空标准化，1980,(3)：27-32.

Lan Yuxiang. Extrusion tap design and tolerance standard[J]. Aviation Standardization, 1980，(3)：27-32.

[4]董伟雄.挤压丝锥的特点及应用[J].江苏电器，2001，(6)：41-43.

Dong Weixiong. Features and applications of squeeze taps[J]. Jiangsu Electrical Appliance，2001，(6)：41-43.

[5]金龙建，蒋红超. U形钩多工位级进模设计[J].模具工业，2013，39(1):41-42.

Jin Longjian, Jiang Hongchao. U-shaped hook multi-station progressive die design[J]. Mould Industry,2013,39(1):41-42.

[6]陈炎嗣.多工位级进模设计与制造[M].北京:机械工业出版社,2006.

Chen Yansi. Multi-station Progressive Die Design and Manufacture[M].Beijing: China Machine,2006.

[7]杨关全.模具设计与制造基础[M].北京：北京师范大学出版社，2009.

Yang Guanquan. Basic Mold Design and Manufacturing[M]. Beijing: Beijing Normal University Press,2009.

[8]黄珍媛，罗建东,刘慧平. 小孔冲裁用细长凸模保护套新型制造方法[J]. 锻压技术,2012,37(5):109-111.

Huang Zhenyuan,Luo Jiandong,Liu Huiping. Hole punching protection set of new manufacture method with elongated punch[J]. Forging & Stamping Technology,2012, 37(5):109-111.

[9]张凌云，蔺锋，李振军.一种确定冲裁间隙试验模具的设计[J]. 锻压技术,2012，37(6):81-83.

Zhang Lingyun,Lin Feng,Li Zhenjun. A method to determine the design of blanking clearance test die[J]. Forging & Stamping Technology ,2012，37(6):81-83.

[10]周俊荣. 管夹典型零件连续模具设计[J].锻压技术，2011，36（1）：97-99.

Zhou Junrong. Design of progressive die for the typical parts of pipe clamp[J]. Forging & Stamping Technology, 2011，36(1):97-99.

服务与反馈：

【本网站尚未开通全文下载服务】【加入收藏】