锻压技术

圆管异形孔冲裁工艺设计及有限元模拟

英文标题：Process design and numerical simulation on shaped hole blanking of steel round pipe

作者：郭钊唐文亭曹立勋

单位：西安理工大学

关键词：圆管异形孔冲裁断面质量

分类号：TG386

出版年,卷(期):页码：2014,39(8):140-145

摘要：

为了提高圆管壁部多异形孔冲裁的工作效率和优化冲裁断面质量，采用对冲工艺，设计出了双斜楔式对冲冲孔模和4种不同形式的凸模对圆管进行冲裁。利用Deform软件，对不同冲头形式下圆管异形孔的冲裁过程进行数值模拟，得到了单冲过程和对冲过程下圆管的受力情况，并对比分析了不同冲头形式下冲孔的断面形貌及载荷-行程曲线。结果表明，对冲工艺在提高工作效率的同时可使管件在冲裁时受力更加稳定；基于各种冲头形式下冲裁变形机理的不同，使用凹面凸模可提高断面质量，缩短模具行程；使用尖凸模可减小冲裁力，延长模具寿命。

To improve the processing efficiency of shaped hole blanking for steel round pipe and optimize the section quality, a process called face to face blanking was adopted, a double-wedged punching die and four kinds of punches were designed and the blanking process of shaped holes of round pipe with different punches were simulated by Deform and the stress situation of the round pipe in single blanking and face to face blanking were obtained, then the load-stroke curves and section qualities in different punches were analyzed contrastively. The results show that the process of face to face blanking can improve the working efficiency and stability of the pipe under the force. Different kinds of punches have different deformation mechanisms, the concave blade punch can improve the section quality and shorten the stroke, while the pointed blade punch can decrease the blanking force and extend the life of the mould.

基金项目：

陕西省电工材料与熔（浸）渗技术重点实验室建设项目

郭钊（1988-），男，硕士研究生

参考文献：

［1］魏公际，龚小涛，彭成允，等.管材无凹模冲孔变形机理分析与有限元模拟[J].模具工业，2008,34(10):36-38.Wei G J, Gong X T, Peng C Y, et al. Deformation mechanism analysis and finite-element simulation on punching of pipe free of cavity die[J].Die & Mould Industry, 2008,34(10):36-38.
［2］Dirk Brokken. Numerical Modeling of Ductile Fracture in Blanking[M].Eindhoven:Technische Universiteit Eindhoven,1999.
［3］王同海.管材塑性加工技术[M].北京：机械工业出版社，1998.Wang T H. Tube Plastic Forming Technology [M].Beijing: China Machine Press, 1998.
［4］谭文娟，彭成允，陈和请，等.钢管无凹模冲孔凸模结构设计与优化[J].模具工业，2007，33(6)：30-33.Tan W J, Peng C Y, Chen H Q, et al. Structural design and optimization of die without die plate for punching hole on steel pipe[J]. Die & Mould Industry, 2007，33(6)：30-33.
［5］《机械工程材料性能数据手册》编委会.机械工程材料性能数据手册[M].北京：机械工业出版社，1994.Editorial Committee of Data Handbook of Mechanical Engineering Materials. Data Handbook of Mechanical Engineering Materials [M]. Beijing： China Machine Press, 1994.
［6］赵中华，张猛，韦习成.冲裁速度对冲压件断面质量的影响[J].塑性工程学报，2010，17(4)：45-49.Zhao Z H, Zhang M, Wei X C. Study of influence of blanking velocity on section quality of stamping work-piece [J]. Journal of Plasticity Engineering, 2010,17(4):45-49.
［7］江秉华，刘渝.管形零件冲孔过程的变形研究[J].锻压技术，2007，32(5)：148-151.Jiang B H, Liu Y. Deformation study of piercing on tubular parts [J]. Forging & Stamping Technology, 2007,32(5):148-151.
［8］方刚，曾攀.金属板料冲裁过程的有限元模拟[J].金属学报,2001，37(6)：653-657.Fang G, Zeng P. Finite element simulation for blanking process of sheet metal [J]. Acta Metallurgica Sinica, 2001,37(6):653-657.
［9］Hussonl C, Correia J P M, Daridon L,et al. Finite elements simulations of thin copper sheets blanking:Study of blanking parameters on sheared edge quality [J]. Journal of Materials Processing Technology , 2008,199:74-83.
［10］Thipprakmas S, Rojananan S.An investigation of step taper-shaped punch in piercing [J].Journal of Materials Processing Technology,2007,199：32-39.
［11］蒲思洪，温彤.韧性断裂准则与阀值选取的理论及试验研究[J].热加工工艺，2009，38(3)：18-21.Pu S H, Wen T. Theoretical and experimental research on choosing criterion and critical value of ductile fracture [J]. Hot Working Technology, 2009,38(3):18-21.

服务与反馈：

【文章下载】【加入收藏】