锻压技术

轧制润滑对冷轧机振动的影响

英文标题：Influence of rolling lubrication on vibration of cold rolling mill

作者：吴炳胜王子龙吴继民张子波

关键词：冷轧振动轧制润滑摩擦系数

分类号：TG333

出版年,卷(期):页码：2014,39(8):69-71

摘要：

以冷轧机系统的振动现象为研究对象，结合近年来的冷轧机振动问题的研究成果，探讨了轧制润滑液与冷轧机振动之间的关系，得出适当增加润滑液的摩擦系数，可以起到消振和减振的目的。轧制润滑液的摩擦系数主要受到压下量、轧制速度、润滑液浓度和温度、固体微粒的含量的影响，并指出对于增加轧制液的摩擦系数，从压下量和润滑液浓度两个方面进行调节更为合理，在以上调节未能达到所需摩擦系数的情况下可从固体微粒含量方面进行调节。

The vibration phenomenon of cold rolling mill was studied as object, the researched result of cold rolling mill vibration problem in recent years was combined, and the relationship between rolling lubricant and rolling mill vibration was discussed. The conclusion is made that appropriately increasing friction coefficient of emulsion lubricants is useful to decrease or eliminate the vibration of cold rolling mill. The friction coefficient of lubricants for cold rolling mill mainly depends on rolling reduction, velocity of rolling, concentration and temperature of lubricant and content of solid additive. From rolling reduction and concentration of lubricant to adjust friction coefficient is more reasonable for the increasing of friction coefficient of lubricants. When the above adjustment does not achieve the needed friction coefficient, it can adjust the content of solid additive.

基金项目：

河北省国际科技合作计划项目（14391901D）

吴炳胜（1956-），男，硕士，教授

参考文献：

［1］林鹤，邹家祥，岳海龙. 轧制液对带钢冷轧机颤振的影响[J]. 钢铁，1996，31(10)：60-79.Ling H, Zou J X, Yue H L. Influence of emulsion lubricants on chatter of cold rolling mill [J]. Iron and Steel, 1996, 31(10):60-79.
［2］孙志辉，邹家样. 轧制润滑摩擦对轧机振动的影响[J]. 重型机械，1998，(6)：25-27.Sun Z H, Zou J X. Influence of rolling lubrication friction on vibration of rolling mill [J]. Heavy Machinery, 1988, (6):25-27.
［3］赵丽娟，高丹. 国内外冷轧机垂直振动问题研究进展[J]. 机械制造，2007，519(45)：28-32.Zhao L J, Gao D. The vertical vibration research progress of the cold rolling mill at home and abroad [J]. Machinery, 2007, 519(45):28-32.
［4］吴继民，吴炳胜. CSP轧机主传动系统致振因素的分析[J]. 锻压技术，2012，35(6)：85-88.Wu J M, Wu B S. Analysis on vibration factors of main drive system of CSP hat rolling mill [J]. Forging & Stamping Technology, 2012, 35(6):85-88.
［5］邹家祥，徐乐江. 冷连轧机系统振动控制[M]. 北京：冶金工业出版社，1998.Zou J X, Xu L J. Tandem Mill Vibration Control [M]. Beijing: Metallurgical Industry Press, 1988.
［6］殷文凯. 冷轧乳化液中铁粉特性及其对摩擦系数影响的试验研究[D]. 上海:华东理工大学，2013.Yin W K. Research on Iron Particles Characteristic and Its Effect on Friction Coefficient in Cold Rolling[D]. Shanghai: East China University of Science and Technology, 2013.
［7］钟江. 基于LS-DYNA的高轧件轧制过程仿真分析与实证研究[D]. 杭州：浙江工业大学，2007.Zhong J. Simulation Analysis and Empirical Research of the Rolling Process of High Work Piece Based on LS-DYNA[D]. Hangzhou：Zhejiang University of Technology, 2007.
［8］孙伟杰，瞿志豪，林立，等. 应用正交设计法确定多水平下的轧制润滑液摩擦系数[J]. 上海金属，2008，30(2)：45-49.Sun W J, Qu Z H, Lin L, et al. Ascertaining the main factor of friction coefficient of multi-level rolling lubricant by orthogonal test [J]. Shanghai Metals, 2008, 30(2):45-49.
［9］曹忠祥. 2130冷连轧机振动的研究[D]. 鞍山：辽宁科技大学，2008.Cao Z X. Research on the Vibration of 2130 Cold Tandem Rolling Mill [D]. Anshan: University of Science and Technology Liaoning, 2008.
［10］段吉安,钟掘. 高速轧机工作界面的负阻尼特性[J]. 中南大学学报，2002,33(4)：401-404.Duan J A, Zhong J. Negative damping of rolling interface for rolling chatter [J]. Journal of Central South University,2002,33(4)：401-404.

服务与反馈：

【文章下载】【加入收藏】