锻压技术

G系列叉车发动机机罩冲压成形工艺参数优化

英文标题：Optimization of stamping parameters for G series forklift engine hood

作者：朱梅云傅建崔礼春

分类号：TG386

出版年,卷(期):页码：2014,39(9):27-30

摘要：

利用UG软件建立G系列发动机机罩的三维模型，然后导入eta／DYNAFOR软件对其冲压成形过程进行数值模拟。通过调节板料成形过程中压边力、拉深筋高度、冲压速度和模具间隙参数等主要工艺参数得到不同的模拟结果，采用正交实验法对模拟结果进行比较和分析，获得最优工艺参数组合：压边力4430 kN、拉深筋高度8 mm、冲压速度3000 mm·s-1、凸凹模间隙1.575 mm。根据最优工艺参数进行冲压成形工艺试验，得到表面质量合格的发动机机罩冲压件。检验结果表明，最优参数组合可以有效解决实际生产制造过程中起皱、破裂和未充分拉深等冲压质量问题。

The three-dimensional model of G series forklift engine hood was founded by UG software, and then this model was imported to the eta/Dynaform software to simulate the stamping process. The simulation results were obtained from different technological parameters such as blank holder force(BHF)、drawbead height、punch speed and die clearance. The technological parameters were optimized by the orthogonal experimental results. The optimal technological parameters were BHF 4430 kN, drawbead height 8 mm, punch speed 3000 mm·s-1 and die clearance 1.575 mm. The qualified engine hood parts were obtained by forming experiment according to the optimal technological parameters above. Test results show that the optimal parameters effectively solve the problems of drawing such as wrinkling, crack and inadequate stretch areas in the forming process.

基金项目：

国家科技重大专项（2010ZX04004-112-4）；安徽省科技厅基金资助项目（11010201020）

朱梅云（1977-），女，硕士，工程师

参考文献：

［1］Kim T J, Yang D Y. Improvement of formability for the incremental sheet metal forming process[J]. International Journal of Mechanical Sciences,2000,(42):1271-1286.
［2］Luo Y J, Zhang Y Q，He D N.Acta Metall[J]. Sin., 2003, 16(1), 31-33.
［3］朱梅云，崔礼春，熊飞，等.基于eta/Dynaform的尾门内板模面艺优化设计[J].锻压技术，2011，36(5):32-35.Zhu M Y, Cui L C, Xiong F, et al. Die face optimization process based on eta/Dynaform[J]. Forging & Stamping Technology,2011,36(5):32-35.
［4］朱梅云，傅建，王玥，等.上盖板冲压成形中缺陷分析与模拟[J].塑性工程学报，2009,6(16):68-71.Zhu M Y, Fu J, Wang Y,et al. Defect analysis and numerical simulation for the upper cover plate drawing[J]. Journal of Plasticity Engineering,2009,6(16):68-71.
［5］雷正保.汽车覆盖件冲压成形CAE技术及其工业应用研究[D].长沙：中南大学,2003.Lei Z B. Research on CAE Technology and Its Industrial Application of Auto Covering Stamping Forming[D].Changsha: Central South University, 2003.
［6］林忠钦.车身覆盖件冲压成形仿真[M].北京：机械工业出版社,2004.Lin Z Q. Simulation of Auto-Body Panel Stamping Forming[M].Beijing: China Machine Press,2004.
［7］赵海鸥.LS-DYNA动力分析指南[M]. 北京：兵器工业出版社，2003．Zhao H O. Guide to The Analysis of LS-DYNA[M]. Beijing: Weapon Industry Press,2003.
［8］黄跃东，邱晓刚.汽车顶盖冲压成型的CAE模拟研究[J].汽车技术技术,2011,（6）：79-81.Huang Y D, Yue X G. Study on CAE simulation of automobile head cover stamping forming[J].Automobile Technology, 2011,（6）：79-81.
［9］朱梅云. G系列叉车发动机机罩冲压成形的质量控制与生产流程优化[D]. 成都：西华大学, 2009.Zhu M Y. Stamping Quality Control and Production Process Optimization of G-series Forklift Engine Hood[D].Chengdu: Xihua University,2009.

服务与反馈：

【文章下载】【加入收藏】