锻压技术

基于伺服技术的板材冲压成形性研究

英文标题：Research on the formability of steel plate based on servo technology

作者：朱梅云傅建崔礼春

分类号：

出版年,卷(期):页码：2014,39(10):43-46

摘要：

基于动力显示有限元数值模拟软件eta／Dynform，对后围上横梁板的拉深成形过程进行数值模拟，研究了后围上横梁制件冲压拉深成形过程中板材的塑性变形与其加载方式及速度的关系，板材拉深成形速度由大到小变化时，制件的拉深成形性较好。通过伺服技术的应用，对冲压成形拉深运动曲线进行优化，成功实现通过改变冲压成形过程中的运动轨迹来提高冲压成形性能的目的。模拟实验和物理实验验证相吻合,均得到合格的冲压拉深件。

Based on eta/Dynaform, the drawing process of upper beam in rear body was numerically simulated. The relationship among plastic deformation of upper beam in rear body, loading modes and velocity during drawing process was studied. When the drawing velocity of steel plate changes from large to small，the drawing formability of the part is good. By servo technology，the movement curves of drawing were optimized，which improved the drawing formability through changing the movement locus of drawing process. The simulation met with the physical experimental result，and qualified stamping parts were obtained by both experiments.

基金项目：

国家科技重大专项资助项目（2010ZX04004-112-4）；安徽省科技厅基金资助项目（11010201020）

朱梅云（1977-），女，硕士，工程师

参考文献：

[1]Akihro Watanabe，Hisaki Watari.Improvement of formability by servo die cushion in deep drawing [A].SICE Annual Conference 2010[C]. Taipei,2010.

[2]Nakagawa T.Servo motor drive press and market trends in Japan[A].56th CIRP [C]. Japan:Kobe, 2006.

[3]Nakagawa T. Advantages of servo presses in metal forming with a focus on warm forming of sheets[A]. 56th CIRP [C]. Japan:Kobe, 2006.

[4]朱梅云，崔礼春，熊飞，等.基于eta/Dynaform的尾门内板模面艺优化设计[J].锻压技术，2011，36（5）:32-35.

Zhu M Y，Cui L C，Xiong F，et al.Die face optimization process based on eta/Dynaform[J].Forging & Stamping Technology，2011，36（5）:32-35.

[5]朱梅云，傅建，王玥，等.上盖板冲压成形中缺陷分析与模拟[J].塑性工程学报，2009，6(16):68-71 .

Zhu M Y，Fu J，Wang Y，et al. Defect analysis and numerical simulation for the upper cover plate drawing[J]. Journal of Plasticity Engineering，2009，6(16):68-71 .

[6]雷正保.汽车覆盖件冲压成形CAE技术及其工业应用研究[R].长沙：中南大学，2003.

Lei Z B.Research on CAE Technology and Its Industrial Application of Auto Covering Stamping Forming[R].Changsha:Centralsouth University,2003.

[7]林忠钦.车身覆盖件冲压成形仿真[M].北京：机械工业出版社,2004.

Lin Z Q.Simulation of Auto-body Panel Stamping Forming [M].Beijing:China Machine Press,2004.

服务与反馈：

【本网站尚未开通全文下载服务】【加入收藏】