锻压技术

断面分流比对双孔分流模挤压方管焊合过程及焊合质量的影响

英文标题：Influence of area ratio of portholes on welding process and quality during the extrusion of square tube by a porthole die

作者：黄东男孙玉国马玉李有来左壮壮

单位：内蒙古工业大学通辽市交通工程局

关键词：分流模挤压断面分流比焊合质量

分类号：TG379

出版年,卷(期):页码：2014,39(11):112-116

摘要：

分流模挤压时各断面间分流比的合理匹配直接关系到挤压力的大小、金属焊合过程的流动均匀性、焊缝位置及焊合质量。采用有限元法计算研究了断面分流比对双孔分流模挤压方管焊合过程和焊合质量的影响。研究结果表明：当断面分流比为0.46~0.52时，金属在焊合室内流动均衡，焊缝保持在模芯中心附近，能够挤出表面平直的方管制品。断面分流比的变化对型材出口温度基本没有影响，其温度始终保持在546~549 ℃；随着断面分流比的增加，焊合静水压力逐渐减小，并由363 MPa 减为314 MPa，使得焊合质量降低，因此，在保证能够挤出表面平直的方管的同时，应尽量减小断面分流比。

During the extrusion of hollow profile by a porthole die, area ratio of portholes is directly related to extrusion load, metal flowing uniformity in metal welding process, position of welding line as well as welding quality. Using FEM simulation and extrusion practice, the influence of area ratio of portholes on welding process and quality of square tube extruded by a porthole die was discussed. The results show that, as the area ratio is 0.46-0.52, the metal flowing is equilibria, and the welding line is more close to the center of the mandrel, so the square tube with flat surface can be extruded. The changing of area ratio of portholes has no significant effect on the final temperature of die orifice which remains within 546-549 ℃. With the increasing of area ratio of portholes, the hydrostatic stress of welding decreases from 363 MPa to 314 MPa, which leads to worse welding quality. Therefore, the area ratio of portholes should be small as soon as possible under the prerequisite condition of extruding square tube with flat surface.

基金项目：

国家自然科学基金资助项目（51364027）；教育部重点实验室开放课题基金（KLAMP-1104）；内蒙古自治区高等学校科学研究研究项目（NJZY13105）

黄东男（1979-），男，博士，副教授

参考文献：

［1］谢建新. 金属挤压技术的发展现状与趋势[J].中国材料进展, 2013,32（5）:254-263.Xie J X. Current situation and development trends of metals extrusion technology [J]. Materials China,2013,32（5）:254-263.
［2］张志豪, 谢建新. 挤压模具数字化设计与数字化制造[J]. 中国材料进展, 2013,32（5）:293-299.Zhang Z H，Xie J X. Digital design and manufacture of extrusion die[J]. Materials China, 2013, 32（5）:293-299.
［3］邸利青,张士宏.分流组合模挤压过程数值模拟及模具优化设计[J].塑性工程学报,2009,16(2):123-127.Di L Q,Zhang S H. Porthole die extrusion process numerical simulation and optimal die design [J]. Journal of Plasticity Engineering, 2009, 16(2):123-127.
［4］程磊, 谢水生,和优锋, 等. 空心铝型材蝶形模挤压技术的应用 [J].锻压技术,2011,36(1):13-16.Chen L, Xie S S, He Y F, et al. Application of butterfly dies in aluminum hollow profiles extrusion [J]. Forging & Stamping Technology, 2011, 36(1):13-16.
［5］唐鼎,邹天下,李大永,等.亚毫米孔径微通道铝合金管挤压成形的数值模拟[J].塑性工程学报, 2011,18(3): 25-29.Tang D, Zou T X, Li D Y,et al. Numerical simulation study upon extrusion forming of microchannel tube [J]. Journal of Plasticity Engineering, 2011, 18(3):25-29.
［6］Zhang Z H, Hou W R, Huang D N, et al. Mesh Reconstruction Technology of Welding Process in 3D FEM Simulation of Porthole Extrusion and Its Application[J]. Procedia Engineering, 2012, 36:253-260.
［7］庞祖高,韦春萍,雷声远,等.分流桥宽度对挤压成形的影响及模具应力分析[J]. 锻压技术,2010,35(5):137-141.Pang Z G, Wei C P, Lei S Y, et al. Influence of shunting bridge width to extrusion process of aluminum alloy tubes and moulds stress analysis [J]. Forging & Stamping Technology, 2010, 35(5):137-141.
［8］Liu P, Xie S S, Cheng L. Die structure optimization for a large, multi-cavity aluminum prole using numerical simulation and experiments [J]. Materials and Design, 2012, 36:152-160.
［9］Zhang S G, Zhao G Q, Chen Z R, et al. Effect of extrusion stem speed on extrusion process for a hollow aluminum prole[J].Materials Science and Engineering B,2012,117(19):1691-1697.
［10］谢建新,黄东男,李静媛, 等. 一种空心型材分流模挤压焊合过程数值模拟技术: 中国, 200910088960.7
［P］. 2009-07-15.Xie J X. Huang D N, Li J Y, et al. A numerical simulation technology for hollow profile extrusion by porthole die: China, 200910088960.7
［P］. 2009-07-15.
［11］黄东男,张志豪,李静媛,等.网格重构在铝合金空心型材分流模挤压过程数值模拟中的应用[J].锻压技术,2010,35(6):128-132.Huang D N, Zhang Z H, Li J Y, et al. Applications of mesh reconstruction technology in FEM simulation of porthole die extrusion for hollow Al-alloy profile[J]. Forging & Stamping Technology, 2010, 35(6):128-132.
［12］黄东男,于洋,宁宇, 等. 分流模挤压非对称断面铝型材有限元数值模拟分析[J].材料工程,2013,(3):32-37.Huang D N, Yu Y, Ning Y, et al. FEM simulation of an Al-alloy profile with non-symmetrical cross section during porthole extursion [J]. Journal of Materials Engineering, 2013,(3):32-37.

服务与反馈：

【本网站尚未开通全文下载服务】【加入收藏】