锻压技术

基于KF的滑块体参数化设计系统的开发

英文标题：Development of parametric design system of slide block

作者：章盼梅夏琴香尚慧慧阮卫平徐海涛

分类号：

出版年,卷(期):页码：2015,40(1):81-85

摘要：

滑块体零件的基础特征尺寸有100多个，设计时需要查表和使用经验公式进行繁琐的计算，花费了大量时间和精力。以UG软件为平台，将KF(Knowledge Fusion，知识熔接)产生式规则与UG表达式引用等技术相结合建立参数化模板；通过UG/OPEN MenuScript和UIStyler设计了菜单和对话框，利用API函数实现模型驱动；在Visual C中基于MFC平台实现标准型号滑块体数据库访问；基于KF技术，开发了滑块体参数化设计系统。此系统只需要在用户界面输入6个主参数，就可以生成相应的滑块体零件，大大地缩短了滑块体零件的设计时间，能让企业快速参与和赢得市场竞争。

There are more than 100 base feature dimensions of the slide block part, and a great deal of time and energy are spent in looking up table and experience formulas for designing calculation of the part. The parametric model for slide block was established based on UG software by combining with KF（Knowledge Fusion） production rules and expression references. The menu and dialog box were designed by UG/OPEN MenuScript and UIStyler. API function was used to realize the model driven. Database of standard slide block parts was accessed based on the MFC platform in Visual C environment. The parametric design system of slide block was developed based on KF technology. After six main parameters are input in the user interface in this system, the corresponding parts will be generated. Therefore, the designing period of slide block is greatly shorten, which enable enterprises to react and participate in the market rapidly and finally win the competition.

基金项目：

顺德区产学研合作项目（2012CXY01）；广东省企业科技特派员工作站项目（2010B090500012 ）

章盼梅（1984-），女，硕士，实验师

参考文献：

［1］王春生.中国机床工具工业年鉴[M］.北京：机械工业出版社，2012.Wang C S. China Machine Tool & Tool Industry Yearbook [M］. Beijing：China Machine Press,2012.

［2］张进成,李开林.基于知识工程的UG二次开发[J］.计算机工程与设计，2008,29(9):2390-2391.Zhang J C，Li K L. Second development of UG based on knowledge-based engineering [J］. Computer Engineering and Design, 2008，29(9)：2390-2391.

［3］张佳侠,朱家诚. 基于UG的参数化零件模型库的创建 [J］.机械工程师，2008，(7):144-146.Zhang J X，Zhu J C. The creation of a model parametric parts library based on UG[J］.Mechanical Engineer，2008，(7)：144-146.

［4］戴春来. 参数化设计理论的研究[D］.南京：南京航空航天大学，2002.Dai C L.Research of Parametric Design [D］. Nanjing ：Nanjing University of Aeronautics & Astronautics，2002.

［5］王一成，张树仁.UG二次开发中数据库的建立方法[J］.长春大学学报，2011,21(12）：1-4.Wang Y C，Zhang S R. Method of establishing database in UG secondary development [J］.Journal of Changchun University,2011, 21(12）：1-4.

［6］周临震,李青祝,秦珂.基于UG NX系统的二次开发[M］.镇江：江苏大学出版社，2012.Zhou L Z,Li Q Z,Qin K.Based on Secondary Development of UG NX System [M］.Zhenjiang:Jiangsu University Press, 2012.

［7］王建新，王武，王爱国，等.大型压力机滑块结构设计[J］.一重技术，1998,(3):21-24.Wang J X,Wang W,Wang A G,et al.Design of block on large press machine[J］. CFHI Technology,1998,(3):21-24.

［8］何德誉.曲柄压力机[M］.北京：机械工业出版社，1985.He D Y.Crank Press Machine[M］. Beijing: China Machine Press,1985.

［9］黄勇.UG/Open 应用开发典型实例精解[M］.北京：国防工业出版社，2010.Huang Y. Typical Instance Essence Solution UG/Open Application Development[M］. Beijing：National Defense Industry Press,2010.

［10］侯永涛，丁向阳.UG/OPEN 二次开发与实例精解[M］.北京：化学工业出版社，2007.Hou Y T,Ding X Y.UG/Open Secondary Development and Case-based Explanation [M］. Beijing：Chemical Industry Press,2007.

［11］黄勇,张博林,薛运锋.UG二次开发与数据库应用基础与典型范例[M］. 北京：电子工业出版社， 2008.Huang Y，Zhang B L，Xue Y F. UG Secondary Development and Foundation of Database Application with a Typical Example [M］. Beijing：Publishing House of Electronics Industry, 2008.

服务与反馈：

【文章下载】【加入收藏】