锻压技术

人工智能方法在热模锻压力机故障诊断技术中的应用

英文标题：Application of artificial intelligence methods in fault diagnosis technology of hot die forging press

作者：苏畅孙勇徐超蒋鹏刘波

单位：北京机电研究所

分类号：

出版年,卷(期):页码：2015,40(4):102-105

摘要：

为提高热模锻压力机生产过程中故障诊断的效率，对热模锻压力机的故障机理进行了分析；应用规则推理与案例推理的智能方法对热模锻压力机的故障诊断进行研究。结合热模锻压力机的特点并针对两种推理技术各自的局限性，提出了将规则推理与案例推理相结合的、适用于热模锻压力机故障诊断的人工智能方法；构建了热模锻压力机生产过程中故障诊断的故障树，并得到导致故障现象的最小割集；建立了表示故障案例的五元组，以离合器打滑与制动器打滑为例进行案例推理的分析。本研究在一定程度上解决了知识获取困难的问题。

In order to improve the efficiency of fault diagnosis in the production of hot die forging press, the failure mechanism of hot die forging press was analyzed，the fault diagnosis of hot die forging press was researched by the intelligent methods of rule-based reasoning and case-based reasoning. Combined with the characteristics of the hot die forging press with two kinds of reasoning technology in their respective limitations, an artificial intelligence method, which is suitable for the fault diagnosis of hot die forging press integrated rule-based reasoning and case-based reasoning, was put forward. The fault tree of fault diagnosis in the production of hot die forging press was built, and the minimum cut sets resulting in fault phenomenon were obtained. The five-tuple array describing fault cases were established, and the analysis on case-based reasoning of clutch skid and brake skid was conducted. Therefore, the difficulties of knowledge acquisition were solved to some extent.

基金项目：

2014年智能制造装备发展专项(数字化锻造车间系统研制与应用示范)

苏畅（1989-），女，硕士研究生

参考文献：

[1] 李红卫，杨东升，孙一兰,等. 智能故障诊断技术研究综述与展望[J]. 计算机工程与设计，2013，34(2)：632-637.

Li H W, Yang D S,Sun Y L，et al. Study review and prospect of intelligent fault diagnosis technique[J].Computer Engineer and Design, 2013，34(2):632-637.

[2]王淑玉，张彦明. MP3-3150 t热模锻压力机连车故障的分析与诊断[J]. 自动化技术与应用，2007，26(5)：106-110.

Wang S Y, Zhang Y M. Fault analysis of the MP3-3150 hot die forging press[J]. Techniques of Automation and Applications, 2007，26(5):106-110.

[3]李郝林，杨云梅.基于案例推理的数控轧辊磨床故障诊断系统的设计[J]. 工具技术，2010，44(12)：45-47.

Li H L,Yang Y M. Fault diagnosis system design of NC roll grinding machine based on case-based reasoning[J].Tool Engineering, 2010，44(12)：45-47.

[4]覃日强，韦华南. 基于故障树的曲柄压力机高频振动故障诊断分析[J]. 装备制造技术，2011，(2)：84-85.

Qin R Q, Wei H N. The analysis and diagnosis of high frequency vibration fault of crank press based on fault tree[J].Equipment Manufacturing Technology, 2011，(2)：84-85.

[5]李希红，黄志坚，谢文祥,等. 案例推理在轧机液压故障诊断系统中的应用研究[J]. 冶金丛刊，2007，167(1)：7-9.

Li X H, Huang Z J, Xie W X，et al. Application research of CBR in fault diagnosis of the mill hydraulic system[J].Metallurgical Collections, 2007，167(1)：7-9.

[6]严爱军, 柴天佑, 王普. 基于案例推理的竖炉故障预报系统[J]. 控制与决策, 2008, 23(2): 177-181.

Yan A J, Chai T Y, Wang P. Fault prediction system using case-based reasoning for shaft furnace status[J]. Control and Decision, 2008, 23(2): 177-181.

[7]唐宇，刘宇，刘传菊. 基于案例推理和故障树诊断的专家系统设计[J]. 广西物理，2008，29(3)：25-27.

Tang Y, Liu Y, Liu C J. Case-based reasoning and fault tree diagnosis expert system design[J].Guangxi Physics, 2008，29(3)：25-27.

[8]王巍，崔海英，黄文虎. 基于故障树最小割集和最小路集的诊断方法研究[J]. 数据采集与处理，1999，14(1)：26-29.

Wang W, Cui H Y, Huang W H. A Diagnosis approach based on minimal cut sets and minimal path sets of fault tree[J].Journal of Data Acquisition & Processing, 1999，14(1)：26-29.

[9]苗祚雨，牛儒，唐涛. 基于二元决策图的故障树最小割集求解算法研究[J]. 中北大学学报:自然科学版，2014，35(2)：141-146.

Miao Z Y, Niu R, Tang T. Research on fault tree minimal cut set generation algorithm based on binary decision diagram[J].Journal of North University of China:Natural Science Edition, 2014，35(2)：141-146.

[10]崔焕庆，周传爱. 应用Petri网求解事故树最小割集的方法研究[J]. 计算机工程与设计，2011，32(2)：581-583.

Cui H Q,Zhou C A. Method for finding fault trees minimal cut sets using petri nets[J]. Computer Engineering and Design,2011，32(2)：581-583.

服务与反馈：

【文章下载】【加入收藏】