锻压技术

高强铝合金复杂锻件等温可分凹模精密模锻成形工艺研究

英文标题：Study on isothermal split-die precision forging process of complicated forging of high strength aluminum alloy

作者：林军康凤胡传凯陈强郝元元赵祖德

分类号：TG319

出版年,卷(期):页码：2015,40(5):52-58

摘要：

以某高强铝合金复杂锻件为研究对象，通过锻件工艺性分析，选用了等温可分凹模模锻精密成形工艺作为其制备工艺，采用热力耦合有限元分析方法对新成形工艺的终成形、预成形、拍扁等3个工序进行了模拟分析。终成形模拟结果表明：具有基本几何特征的预制坯成形后在多个位置形成折叠。通过平面应变有限元模拟获得了这些折叠产生的机理，给出了可分凹模模锻工艺中复杂锻件预制坯设计的基本原则，并优化了预制坯几何外形。工艺试验结果表明，采用修改后的预制坯和新成形工艺制备的锻件无缺陷，其尺寸精度、表面粗糙度等质量指标优于传统开式模锻件。

For a complicated forging of high strength aluminum alloy, the isothermal split-die forging process dealing with final forging, preforming and flatting was numerically simulated by the coupled thermo-mechanical finite element method (FEM) based on process analysis. The FEM results show several folds have been formed in the final forging due to unreasonable geometric shape of preform. The forming mechanism causing those folds was obtained by finite element simulation with plane strain model. The design principle of the complicated preform forging was given in the split-die forging process, and its geometry was optimized. The experimental results show that the forged piece which manufactured by the new preform and forming process is perfect without any defects, and the overall quality indexes of forged piece, such as dimensional accuracy and surface roughness, are better than that produced by typical open-die forging process.

基金项目：

国防科技工业技术基础项目（C102013C003）

林军（1980-），男，博士，高级工程师

参考文献：

［1］李尚健，黄早文．可分凹模模锻[J]．中国机械工程, 1982, (6): 14-17.Li S J, Huang Z W. On split-die forging process [J]. China Mechanical Engineering, 1982, (6): 14-17.
［2］杨雨春，夏巨谌，胡国安．垂直可分式锻模的改进意见和研究[J]．金属成形工艺，1995, 13(2): 21-23.Yang Y C, Xia J C, Hu G A. Improvement suggestions and research of horizontal split die forging process[J]. Journal of Netshape Forming Engineering, 1995, 13(2): 21-23.
［3］芦勇，陆彬，陈军，等．体积成形预成形设计及优化方法的研究与应用[J]．塑性工程学报，2012, 19(6):1-9.Lu Y, Lu B, Chen J, et al. Research and application of bulk metal preform design and optimization methods [J]. Journal of Plasticity Engineering, 2012, 19(6):1-9.
［4］邓磊，夏巨谌，王新云，等．机匣体多向精锻工艺研究[J]．中国机械工程，2009, 20(7): 869-872.Deng L, Xia J C, Wang X Y, et al. Multi-directional precision forging for casing[J]. China Mechanical Engineering, 2009, 20(7): 869-872.
［5］潘跃进，吴跃江．2024铝合金件精密等温锻造工艺研究[J]．锻压技术，2014, 39(1):25-28.Pan Y J, Wu Y J. Study on isothermal forging process of 2024 aluminum alloy precision parts [J]. Forging & Stamping Technology, 2014, 39(1):25-28.
［6］吴继超，张艳秋，赵亚楠，等．铝合金旋转盘锻件等温精密成形工艺研究[J]．锻压技术，2014,39(1):14-20.Wu J C, Zhang Y Q, Zhao Y N, et al. Study on isothermal precision forming process of aluminium alloy rotating disk [J]. Forging & Stamping Technology, 2014,39(1):14-20.
［7］李伟华，董选普，陈晓君，等．铝合金热模锻润滑机理研究与应用[J]．锻压技术，2010, 35(3): 128-131.Li W H, Dong X P, Chen X J, et al. Research and application of lubrication mechanism for aluminum alloy hot die forging [J]. Forging & Stamping Technology, 2010, 35(3): 128-131.
［8］邢磊，张立文，张兴致，等．基于瞬态法的铝合金与模具钢接触换热实验研究[J]．锻压技术，2010,35(2):120-123.Xing L, Zhang L W, Zhang X Z, et al. Experimental research on contact heat transfer between aluminum alloy and die steel based on transient method[J]. Forging & Stamping Technology, 2010,35(2):120-123.
［9］刘华，王式唐，姜霞，等．挤镦复合成形规律的试验研究[J]．机械科学与技术，2000, 19(4): 623-626.Liu H, Wang S T, Jiang X, et al. Experimental research on the forming laws of extrusion upsetting technology [J]. Mechanical Science and Technology, 2000, 19(4): 623-626.
［10］张艳秋，徐福昌，王冠，等．复杂盘饼类铝合金锻件等温成形缺陷分析[J]．锻压技术，2008,33(5):10-14.Zhang Y Q, Xu F C, Wang G, et al, Defects analysis of aluminum alloy disk forging with complex shape in isothermal forging[J]. Forging & Stamping Technology, 2008,33(5):10-14.

服务与反馈：

【文章下载】【加入收藏】