锻压技术

复杂空间曲面薄板成形模面快速设计方法

英文标题：A rapid design method for the tool surface of sheet metal with complex space and curved surface

作者：袁宏亮杨忠炯周立强李洪宾鲁耀中

单位：中南大学

分类号：TG386

出版年,卷(期):页码：2015,40(5):28-32

摘要：

为减少复杂空间曲面薄板成形模具研制周期，提高设计成功率，提出一种基于体变形法的复杂空间曲面薄板冲压模面的快速设计方法。首先采用有限元法模拟以理想产品曲面为模面的板料冲压成形过程，得到冲压板料节点的位移向量和内力。然后用前向回弹法迭代求解得到补偿模面，其中每个迭代步都涉及到点到面的重构过程，引进体变形算法加快模面重构速度和提高模面重构质量。最后通过混凝土搅拌车螺旋叶片实验验证本文算法的有效性。分析试验结果得到：使用体变形算法后三块叶片的平均计算时间减少26.1%，表明体变形算法加快了计算速度；回弹补偿后三块叶片的平均回弹偏差减少85.1%,表明本文算法回弹补偿效果明显。

In order to reduce development cycle of forming die for sheet metal with complex space and curved surface, and improve the success rate of design, a rapid design method for stamping die surface of sheet metal with complex space and curved surface based on the volume morphing method was put forward. First, stamping process of sheet metal whose tool surface was the ideal product surface was simulated by using finite element method, and the displacement vectors and the internal forces of sheet metal nodes were achieved. Then, the compensatory tool surface was obtained iteratively by the spring-forward method, and each iteration step went through the reconstruction process from point to surface, therefore the reconstruction speed of tool surface was speeded up by introducing the volume morphing method and the quality of surface after reconstruction was improved. At last, the effectiveness of the algorithm was validated through experiment of spiral vanes in concrete mixer truck. The analysis of the experimental results shows that the average computation time of the three vanes is reduced by 26.1% using the volume morphing method, and the calculation speed increases obviously. The average springback deviation of the three vanes after springback compensation is reduced by 85.1%, and it is showed that the springback compensation effect is obvious.

基金项目：

国家重点基础研究发展规划(“973”计划)项目(2013CB035404)

袁宏亮（1989-），男，硕士研究生

参考文献：

［1］Yin Zhongwei, Song Jian, Jiang Shouwei. A new strategy for direct Generation of tool shape from a CAD model based on a meshless method[J]. International Journal of Computer Integrated Manuf, 2004, 17(4): 327-338.
［2］Shawn cheng H, Cao J, Xia Z C. An accelerated springback compensation method[J]. International Journal of Mechanical Sciences, 2007, 49(3): 267-279.
［3］Xiong Wei, Gan Zhong, Xiong Shipeng, et al. Rapid springback compensation for age forming based on quasi newton method[J]. Chinese Journal of Mechanical Engineering, 2014, 27(3): 551-557.
［4］陈炜，陈红辉，谢俊，等．基于回弹补偿的模具型面设计方法研究[J]．锻压技术，2008，33（6）：86-90．Chen W, Chen H H, Xie J, et al. Research on die face design based on springback compensation [J]. Forging & Stamping Technology, 2008,33（6）: 86-90.
［5］胡志超，李延平，常勇，等．基于数值模拟的板料冲压成形回弹补偿方法[J]．锻压技术，2012,37（2）：163-166．Hu Z C, Li Y P, Chang Y, et al. Compensation algorithm for springback in sheet metal forming based on numerical simulation [J]. Forging & Stamping Technology, 2012,37（2）: 163-166.
［6］Anagnostou E L. Optimized Tooling Design Algorithm for Sheet Metal Forming over Reconfigurable Compliant Tooling [D]. New York: State University of New York at Stony Brook, 2002.
［7］Sarraga R F. Modifying CAD/CAM surfaces according to displacements prescribed at a finite set of points [J]. Computer-Aided Design, 2004, 36(4): 343-349.
［8］Sarraga R F, Leblanc P A, Oetjens T J. Using volume morphing to alter panel designs to compensate shape distortion in assembly [J]. Journal of Computing and Information Science in Engineering, 2010, 10(2): 024501-1-4.
［9］Sarraga R F, Oetjens T J, Foss P H, et al. Using volume morphing to compensate shape distortions associated with injection molding[J]. Engineering with Computers, 2010, 26(2): 129-135.
［10］廖娟．基于光学测量的曲面冲压件回弹离散补偿算法研究[D]．广州：华南理工大学，2011．Liao J. A Discrete Springback Compensation Algorithm for Stampings with Curved Surfaces Using Optical Measuring Technology [D]. Guangzhou: South China University of Technology,2011.

服务与反馈：

【文章下载】【加入收藏】