锻压技术

基于冷轧机垂振的乳化液系统改造分析

英文标题：Analysis on improvement of emulsion system based on vertical vibration of cold rolling mill

作者：吴炳胜王子龙

单位：河北工程大学

关键词：冷轧机架垂振乳化液窜流

分类号：TG333.2

出版年,卷(期):页码：2015,40(6):84-87

摘要：

通过对冷轧机垂直振动的分析，得出适当调整乳化液的性能和减小其浓度有利于抑制垂振。进行调整时发现，机架间乳化液的窜流问题严重影响了乳化液的调整效果，基于此原因从机架间喷射梁、张力辊、上下挡液板、吹扫梁、穿带导板等方面分析了乳化液窜流的原因，并提出了有效的改进措施。确定主要改进措施为：调整机架间喷射梁位置；后移张力辊与坝辊的位置，增加乳化液回流量；将吹扫梁改为大角度折形梁；改进挡液板，增加弧形沟槽；改进穿带导板，利于乳化液下落回流等。

Based on the analysis on vertical vibration of cold rolling mill, the vertical vibration can be controlled effectively by adjusting performance of the emulsion and diluting emulsion concentration. It was found that crossflow of emulsion between two racks affected the adjustment on emulsion seriously. The causes of crossflow were analyzed from inter-rack jet beam, tension roll, upper and lower fluid baffle plate, purge beam, threading guide plate, etc. After that, the improvement measures were put forward, namely, adjusting jet beam position between two racks, moving the tension roll and the dam roller backwards, increasing the return flow rate of emulsion, changing purge beam shape as the zigzag with big angle, modifying fluid baffle to increase the arc groove, and improving threading guide to help emulsion reflux, etc.

基金项目：

河北省国际科技合作计划项目（14391901D）

吴炳胜（1956-），男，硕士，教授

参考文献：

［1］孙志辉，邹家祥，何汝迎，等.2030板带冷连轧机的振动分析[J].北京科技大学学报，1997，19(S1)：61-64.Sun Z H,Zou J X,He R Y,et al. Vibration analysis of 2030 cold continuous mill [J]. Journal of University of Science and Technology Beijing,1997,19(S1):61-64.
［2］陈海周.冷轧带钢轧机振动测试及振纹研究[D].重庆：重庆大学，2010.Chen H Z. Vibration Measurement of Cold Rollig Mill and Study of Chatter Mark [D]. Chongqing: Chongqing University,2010.
［3］林鹤，邹家祥，岳海龙.轧制液对带钢冷轧机颤振的影响[J].钢铁，1996，31(10)：60-79.Ling H,Zou J X,Yue H L. Influence of emulsion lubricants on chatter of cold rolling mill [J]. Iron and Steel,1996,31(10):60-79.
［4］邹家祥，徐乐江.冷连轧机系统振动控制[M].北京：冶金工业出版社，1998.Zou J X,Xu L J. Tandem Mill Vibration Control [M]. Beijing: Metallurgical Industry Press,1988.
［5］段吉安，钟掘.高速轧机工作界面的负阻尼特性[J].中南大学学报，2002，33(4)：401-404.Duan J A,Zhong J. Negative damping of rolling interface for rolling chatter[J]. Journal of Central South University,2002,33(4):401-404.
［6］孙伟杰，瞿志豪，林立，等.应用正交设计法确定多水平下的轧制润滑液摩擦系数[J].上海金属，2008，30(2)：45-49.Sun W J,Qu Z H,Lin L,et al. Ascertaining the main factor of friction coefficient of multi-level rolling lubricant by orthogonal test [J]. Shanghai Metals,2008,30(2):45-49.
［7］孙蓟泉，董常福，崔二宝.工艺润滑对带钢表面清洁度的影响[J].润滑与密封，2009，(11)：99-103.Sun J Q,Dong C f,Cui E B. Influence of processing lubrication on strip steel surface cleanliness [J]. Lubrication Engineering,2009,(11):99-103.
［8］吕志勇.唐钢五连轧机乳化液系统改造及优化[D].秦皇岛：燕山大学，2012.Lv Z Y. Tanggang Five Even Mill Emulsion Lubrication System Transformation and Function Optimization[D].Qinhuangdao: Yanshan University,2012.
［9］李小玉，顾正秋，罗东林，等.轧制工艺润滑[M].北京：冶金工业出版社，1981.Li X Y,Gu Z Q,Luo D L,et al. Lubrication of the Rolling Process [M]. Beijing: Metallurgical Industry Press,1981.

服务与反馈：

【文章下载】【加入收藏】