锻压技术

轧制差厚板盒形件成形性能研究

英文标题：Research on formability of box part for tailor rolled blank

作者：张华伟刘相华刘立忠

单位：东北大学

分类号：TG386

出版年,卷(期):页码：2015,40(9):11-15

摘要：

轧制差厚板在汽车轻量化方面展示出巨大潜力，为了推动差厚板在汽车零部件制造领域的应用，以盒形件为研究对象，通过实验和仿真研究了轧制差厚板的成形性能。分析了差厚板几何参数对其成形性能的影响，分别讨论了差厚板盒形件拉深成形极限以及厚度减薄率与差厚板几何参数之间的关系。研究结果表明：轧制差厚板的几何参数对其成形性能有极大影响，成形性能与薄板侧比例、板料厚度差、板料尺寸成反比例，而与过渡区长度成正比例。厚度过渡区偏向薄板侧，较大的过渡区长度、较小的厚度差以及板料尺寸对于获得更好的差厚板成形性能非常有利。

Tailor Rolled Blank(TRB) shows enormous potential in the aspect of automobile lightweight. In order to promote the application of TRB in the field of auto parts manufacturing, the formability of TRB was studied by experiment and simulation for the box part, and the influences of geometric parameters of TRB on formability were analyzed. Furthermore, the relationship between geometric parameters and forming limit as well as thickness thinning ratio for TRB box part during drawing process was discussed respectively. The research results indicate that the geometric parameters greatly affect the formability of TRB. The formability of TRB is in inverse proportion to ratio of the thinner side, blank thickness difference and blank size, and is in proportion to thickness transition zone length. Thickness transition zone is offset to the thinner side, the larger length of transition zone, the smaller blank thickness difference and blank size are preferable for acquiring better formability of TRB.

基金项目：

国家自然科学基金资助项目（51105068, 51475086）;中央高校基本科研业务费专项资金资助项目（N130323003, XNB201413）;河北省高等学校科学技术研究项目（Z2013068）

张华伟（1983-），男，博士，讲师

参考文献：

［1］Merklein M, Johannes M, Lechner M, et al. A review on tailored blanks—Production, applications and evaluation[J]. Journal of Materials Processing Technology, 2014, 214(2):151-164.
［2］Liu X H, Zhao Q L, Liu L Z. Recent development on theory and application of variable gauge rolling, a review[J]. Acta Metallurgica Sinica(English Letters), 2014, 27(3):483-493.
［3］Yang R, Fu Y, Li G. Application of tailor rolled blank in vehicle front end for frontal impact[A]. 2007 World Congress Detroit [C]. Michigan,2007.
［4］邓仁昡, 张广基, 刘相华. 轧制差厚板力学性能试验及数值模拟研究[J]. 锻压技术, 2014, 39(6):32-36.Deng R X, Zhang G J, Liu X H. Research on experiment and numerical simulation of mechanical properties for tailor rolled blank[J]. Forging & Stamping Technology, 2014, 39(6):32-36.
［5］Liu X H. Prospects for variable gauge rolling: technology, theory and application[J]. Journal of Iron and Steel Research(International), 2011, 18(1):1-7.
［6］Ebert A. Umformung von Platinen mit lokal unterschiedlichen Dicken[D]. Aachen: RWTH Aachen, 2001.Ebert A. Forming of Blanks with Locally Different Thicknesses[D]. Aachen: RWTH Aachen, 2001.
［7］Meyer A, Wietbrock B, Hirt G. Increasing of the drawing depth using tailor rolled blanks—Numerical and experimental analysis[J]. International Journal of Machine Tools and Manufacture, 2008, 48(5):522-531.
［8］李艳华, 杜继涛, 费宏斌. 利用ABAQUS与正交试验理论的trb成形参数优化[J]. 现代制造工程, 2009, (11):136-138.Li Y H, Du J T, Fei H B. Forming parameters optimization of tailor rolled blanks based on ABAQUS and orthogonal test theory[J]. Modern Manufacuring Engineeing, 2009, (11):136-138.
［9］姜银方, 靖娟, 王永良, 等. 变截面板方盒形件成形参数的正交试验分析[J]. 模具工业, 2009, 35(1):8-11.Jiang Y F, Jing J, Wang Y L, et al. Orthogonal test on forming parameters of square box made of tailor rolled blanks[J]. Die & Mould Industry, 2009, 35(1):8-11.
［10］袁国定, 靖娟, 王友华, 等. 变压边力对连续变截面辊压板成形性能的研究[J]. 锻压技术, 2009, 34(2):50-53.Yuan G D, Jing J, Wang Y H, et al. Study on box deep drawing formability of tailor rolling blanks using variable blank holder force[J]. Forging & Stamping Technology, 2009, 34(2):50-53.
［11］严有琪, 方雷, 姜银方. 基于分块压边圈的变截面板方盒件成形比较分析[J]. 科技创新导报, 2010, (30):36-37.Yan Y Q, Fang L, Jiang Y F. Comparison analysis of square box for Tailor Rolled Blank based on segmented blank holder[J]. Science and Technology Innovation Herald, 2010, (30):36-37.
［12］张华伟, 刘立忠, 胡平, 等. 轧制差厚板单向拉伸性能研究[J]. 大连理工大学学报, 2012, 52(5):648-651.Zhang H W, Liu L Z, Hu P, et al. Research on uniaxial tension performance of tailor rolled blank[J]. Journal of Dalian University of Technology, 2012, 52(5):648-651.
［13］张华伟. 轧制差厚板成形性能研究[D]. 大连: 大连理工大学, 2012.Zhang H W. Research on Formability of Tailor Rolled Blank[D]. Dalian: Dalian University of Technology, 2012.

服务与反馈：

【文章下载】【加入收藏】