网站首页期刊简介编委会过刊目录投稿指南广告合作征订与发行联系我们English
插座外壳多工位级进模设计
英文标题:Multi-position progressive die design of socket housing
作者:宁建华 
单位:湖南交通职业技术学院 
关键词:插座外壳 冲压工艺 排样设计 级进模 模具结构 
分类号:
出版年,卷(期):页码:2015,40(10):111-115
摘要:

对外形尺寸为83.2 mm×14 mm×10.7 mm,料厚为0.3 mm的插座外壳的使用功能和冲压工艺进行了分析,设计了2种插座外壳级进模的排样设计方案,经比较选择了合理的排样方案,在该排样方案基础上设计了一副外形尺寸为690 mm×385 mm、闭合高为220 mm的多工位级进模,并介绍了模具的整体结构、导正销与侧刃、凸模结构设计。该模具采用中间载体的排样工艺,提高了材料利用率,简化了模具结构,特别在制件的六处卡口处采用压三角线的工艺,能很好地解决90°弯曲的凹模镶件避让后导致塌角大而无法与注塑件装配的难题。实践证明,该模具结构紧凑,设计合理,生产出的制件质量好,满足了大批量生产的需求。

The stamping process and function of socket housing with external dimensions of 83.2 mm × 14 mm × 10.7 mm, material thickness of 0.3 mm were analyzed, and two kinds of layout design for socket housing progressive die were conducted. By comparison,a reasonable layout design was selected, and the multi-position progressive die with external dimensions of 690 mm × 385 mm, shut height of 220 mm was designed. Then the design of overall structure of the die, pilot pin and side edge, punch were introduced. The die with an intermediate vector nesting process can improve material utilization and simplify the structure. Especially,by the technology of pressing triangle line in six bayonets of parts, the difficulty in coming of 90 ° bend die insert that resulted in large sunk defects after preventing collision with the plastic parts was solved. Practice shows that the die has compact structure and reasonable design, therefore good quality parts are produced and the requirement of mass production is met.  
Key

基金项目:
国家科技重大专项(2013ZX06004009)
作者简介:
宁建华(1962-),男,本科,副教授
参考文献:

[1]陈炎嗣.多工位级进模设计与制造[M].北京:机械工业出版社,2014.

Chen Y S.Multi-position Progressive Die Design and Manufacturing [M]. Beijing: China Machine Press, 2014.

[2]金龙建.冲压模具设计及实例详解[M]. 北京:化学工业出版社,2014.

Jin L J.Design and Detailed Examples of Stamping Dies[M]. Beijing: Chemical Industry Press, 2014.

[3]于仁萍,司国雷.外壳底座多工位级进模设计[J].锻压技术,2014,39(12):104-107,118.

Yu R P,Si G L. Design on multi-position progressive die of shell base [J].Forging & Stamping Technology, 2014,39 (12): 104-107,118.

[4]刘军,傅贵武.微型电机金属外壳的大拉深级进模设计[J].锻压技术,2012,37(3):109-113.

Liu J,Fu G W. Design of big drawing progressive die for micro motor metal shell [J] . Forging & Stamping Technology, 2012,37 (3): 109-113.

[5]邓毅.24针底壳级进模具设计[J].锻压技术,2010,35(3):113-117.

Deng Y.Design of multi-position progressive die for 24 pin bottom shell [J] . Forging & Stamping Technology,2010,35(3):113-117.

[6]成虹,胡志华,江秉华.圆盘支架外壳多工位级进模设计[J].模具工业,2014,40(10):51-54.

Cheng H,Hu Z H,Jiang B H. Design of multi-position progressive die for disc holder shell l [J] .Die & Mould Industry,2014,40(10):51-54.

[7]徐自明.热保护器外壳拉深级进模设计[J].模具工业,2010,36(9):35-37.

Xu Z M.Thermal protection shell pulled into the mold design deep level [J] .Die & Mould Industry, 2010,36 (9): 35-37.

[8]齐新华, 李恒灿,李勇,等.安装座的多工位级进模设计[J].机械设计与制造,2011(12):252-253.

Qi X H,Li H C,Li Y,et al. Design on multi-position progressive die of Mounting base [J]. Machinery Design & Manufacture, 2011 (12): 252-253.

服务与反馈:
本网站尚未开通全文下载服务】【加入收藏
《锻压技术》编辑部版权所有

中国机械工业联合会主管 北京机电研究所有限公司 中国机械工程学会塑性工程分会主办
联系地址:北京市海淀区学清路18号 邮编:100083
电话:+86-010-82415085 传真:+86-010-62920652
E-mail: fst@263.net(稿件) dyjsjournal@163.com(广告)
京ICP备07007000号-9