锻压技术

基于AMESim的电磁卸荷溢流阀启闭性能影响因素分析

英文标题：Analysis on influence factors of opening and closing performance for electromagnetic unloading relief valve based on AMESim

作者：翟富刚王海凤朱汉银武启雷郝晓蓓

单位：燕山大学秦皇岛新谊工程有限公司

关键词：卸荷溢流阀启闭性能加载压力卸荷压力

分类号：TH137.9

出版年,卷(期):页码：2016,41(6):66-71

摘要：

阐述了电磁卸荷溢流阀的工作原理，建立了电磁卸荷溢流阀自动卸荷和加载过程的数学模型，研究了电磁卸荷溢流阀启闭性能的影响因素，基于AMESim搭建了电磁卸荷溢流阀的仿真模型，分析了控制活塞直径和先导阀入口锥阀芯直径对启闭性能的影响规律，并进行了试验研究。研究结果表明，电磁卸荷溢流阀的启闭性能主要取决于控制活塞直径和先导阀入口锥阀芯直径；控制活塞直径主要影响电磁卸荷溢流阀的加载压力，而卸荷压力主要取决于先导阀入口锥阀芯直径，二者综合影响电磁卸荷溢流阀的切换压力差。

The working principle of the electromagnetic unloading relief valve was expounded, and the mathematical models of its automatic unloading and loading processes were established. Then, the influence factors of its opening and closing performance were studied. Furthermore, a simulation model was built based on AMESim, and the influences of the diameter of the control piston and the diameter of cone valve of pilot valve inlet on the opening and closing performance were analyzed by simulation. At last, the experimental research was conducted, and the results show that the opening and closing performance of the electromagnetic unloading relief valve depends mainly on the diameter of the control piston and the diameter of cone valve of pilot valve inlet. The diameter of control piston mainly affects the loading pressure of electromagnetic unloading relief valve, while the loading pressure largely depends on the diameter of cone valve of pilot valve inlet. Therefore, they have combined effects on the switching pressure difference of the electromagnetic unloading relief valve.

基金项目：

基金项目:国家自然科学基金资助项目（51575471）；燕山大学重型机械协同创新计划课题（ZX01-20140400-01）

作者简介：翟富刚(1979-)，男，博士，讲师 E-mail：zhaifugang@ysu.edu.cn

参考文献：

［1］张彦军, 官忠范, 刘树敏. 卸荷溢流阀静态特性图解分析[J]. 沈阳工业大学学报,1997, 19(5): 53-57.Zhang Y J, Guan Z F, Liu S M. Diagram and analysis of unloading relief valves static character[J]. Journal of Shenyang University of Technology, 1997, 19(5): 53-57.

［2］Liu X L, He X F, Luo L J,et al. Simulation on the dynamic characteristics of an electromagnetic relief valve with high pressure and large flow rate[J].Applied Mechanics and Materials,2013, 303-306: 1786-1789.

［3］曾文偲, 初长祥, 曾衡,等. 基于AMESim的某型卸荷阀动态特性分析[J]. 机床与液压,2015,43 (16): 98-101.Zeng W S, Chu C X, Zeng H,et al. Simulation study on an unloading valve based on AMESim [J]. Machine Tools and Hydraulic,2015,43 (16): 98-101.

［4］宋时莉. 矿用乳化液泵站电磁卸荷阀的仿真研究[D]. 太原：太原理工大学, 2014.Song S L. Simulation Study of Electromagnetic Unloading Valve for Mine Emulsion Pump Station[D]. Taiyuan: Taiyuan University of Technology, 2014.

［5］彭伟春. 在挖掘机操控系统中采用卸荷溢流阀的探讨[J].建设机械技术与管理,2013,(12): 67-68.Peng W C. Have a discussion on the unloading overflow valve for applying the control system of the excavator[J]. Construction Machinery Technology and Management,2013,(12): 67-68.

［6］李铁莲. 基于AMESim的矿用先导式卸荷溢流阀的建模与仿真[J].煤矿机械,2015,36(2): 91-93.Li T L. Modeling and simulation of mine pilot unloading relief valve based on AMESim[J]. Coal Mine Machinery,2015,36(2): 91-93.

［7］刘琳琳, 王艾伦, 马强, 等. 卸荷溢流阀动态特性的数字仿真研究[J].机床与液压, 2006, 34(9): 124-126.Liu L L, Wang A L, Ma Q, et al. Studying of dynamic characteristics of unloading relief valve[J]. Machine Tools and Hydraulic,2006, 34(9): 124-126.

［8］张远深, 马忠孝, 牛雪虹, 等. 基于AMESim的电磁溢流阀动态特性研究[J]. 甘肃科学学报,2013,25(1): 112-115.Zhang Y S, Ma Z X, Niu X H, et al. Study on dynamic characteristics of electromagnetic relief valve based on AMESim[J]. Journal of Gansu Sciences, 2013, 25(1):112-115.

［9］王艾伦, 刘琳琳, 马强,等. 基于键合图模型的某专用卸荷溢流阀故障诊断分析[J]. 机械科学与技术, 2006,25(9): 1096-1101.Wang A L, Liu L L, Ma Q, et al. Special purpose unloading relief valve fault diagnosis based on a bond graph model[J]. Mechanical Science and Technology,2006,25(9): 1096-1101.

［10］艾超, 孔祥东, 刘胜凯, 等. 基于噪声声强最弱的泵控压机卸压特性研究[J].锻压技术，2013,38(6): 80-85.Ai C, Kong X D, Liu S K, et al. Research of pressure-relief characteristics of pump-controlled press based on the weakest noise intensity[J]. Forging & Stamping Techndogy,2013,38(6): 80-85.

［11］翟富刚. 液压锻造操作机多学科协同仿真研究[D]. 秦皇岛: 燕山大学, 2012.Zhai F G. Multidisciplinary Collaborative Simulation Research on Hydralic-forging Manipulator[D]. Qinhuangdao: Yanshan University, 2012.

［12］Gong Yongjun, Wang Zuwen, Xu Jie, et al. Simulation and experiments study on water hydraulic pressure relief valve with pilot stage[J] . Journal of Mechanical Engineering, 2010, 46(24): 136-142.

［13］Gu Hairong, Xiao Chongyu, Liu Yimin, et al. AMESim used in dynamics simulation on hydraulic milling machine[A]. 2011 IEEE 3rd International Conference on Communication Software and Networks[C]. Xi′an， China, 2011.

［14］Li Xiaopeng, Zhao Guanghui, Ju Xing, et al. Dynamic simulation analysis of the vibratory sinking pile system based on AMESim[J]. Journal of Northeastern University, 2013, 34(5): 683-686.

［15］翟富刚, 孔祥东. 200 kN锻造操作机系统压力异常的原因分析[J].锻压技术,2014,39(7): 77-81.Zhai F G, Kong X D. Analysis of the abnormal system pressure of 200 kN forging manipulator[J]. Forging & Stamping Technology,2014,39(7):77-81.

服务与反馈：

【文章下载】【加入收藏】