锻压技术

不同压边力加载模式对盒形件拉深成形的影响

英文标题：Influence of different blank holder force loading modes on rectangular box drawing

作者：罗昱胡建华陈昶沙海

单位：武汉理工大学

关键词：压边力加载模式盒形件拉深成形

分类号：

出版年,卷(期):页码：2016,41(7):7-10

摘要：

研究了不同压边力加载模式对盒形件拉深成形的影响。以汽车承载底板为研究对象，将其三维模型导入Dynaform软件进行冲压成形模拟，设置了前处理相应的一些工艺参数并得到初步模拟结果。通过设定典型分析数据，分析了整体压边圈及分区压边圈在不同加载模式下的相关结果。研究结果表明：传统的整体压边圈恒定压边力加载模式，结构简单易于实现生产；采取了分区压边圈后，其板料在拉深过程中厚度变化更均匀；整体压边圈变压边力如果采用合适的值对提升零件拉深质量有较显著的改善作用。

The influences of different blank holder force loading modes on rectangular box deep drawing process were researched. For the automobile spare tire plate, its 3D model was imported into Dynaform software, and the stamping process was simulated. Then, the preliminary simulation results were obtained by setting some technological parameters corresponding to pre-processing. Furthermore, through setting typical data, the related results under different loading modes for single-piece blank-holder and segmented blank-holder were analyzed. The results show that the traditional single-piece blank-holder with constant blank-holder force is simple and easy to be produced. The plate thickness change is more even during the drawing process under segmented blank-holder force. The drawing quality of the component is improved apparently by single-piece blank-holder under suitable blank-holder force.

基金项目：

国家自然科学基金资助项目（51475345）；华中科技大学材料成形与模具技术国家重点实验室开放基金课题（P2015-01）

罗昱（1990-），男，硕士研究生

参考文献：

[1]李正芳，安治国，卢飞.某汽车零件多工步成形的工艺参数多目标优化[J].热加工工艺，2015，44(17):92-98.

Li Z F, An Z G,Lu F. Car parts multiplex step forming process parameters of the multi-objective optimization [J]. Hot Working Technology，2015，44(17):92-98.

[2]李秀华.薄板拉深过程中的起皱与防皱的探讨[J].沈阳航空工业学院学报，2005，22(6):4-5.

Li X H. Conclusion of deep drawing process of sheet wrinkling and anti-wrinkle
［J］. Journal of Shenyang Institute of Aeronautical Engineering，2005，22 (6): 4-5.

[3]王元勋.矩形盒拉深时变压边力的数值模拟[J].中国机械工程，2007，18(6):1226-1229.

Wang Y X. Rectangular box deep drawing numerical simulation of time-varying blank-holder force[J]. China Mechanical Engineering，2007，18 (6): 1226-1229.

[4]Candra S，Batan I M L,Berata W,et al. Analytical study and FEM simulation of the maximumvarying blank holder force to prevent cracking on cylindrical cup deep drawing[J].Platelets，2015,26(5):548-553.

[5]罗亚军.板料拉深成形变压边力理论和数值模拟[D].上海:上海交通大学，2003.

Luo Y J. Sheet Metal Deep Drawing Deformation Theory and Numerical Simulation of Blank-holder Force [D]. Shanghai: Shanghai Jiao Tong University，2003.

[6]Kitayama S,Huang S,Yamazaki K. Optimization of variable blank holder force trajectory for spring-back reduction via sequential approximate optimization with radial basis function net work[J]. Structural & Multidisciplinary Optimization，2013，47(2):289-300.

[7]王武荣，陈关龙，林忠钦，等.板料成形中的新型可控压边力技术研究[J].塑性工程学报，2007，14(2):102-107.

Wang W R，Chen G L，Lin Z Q,et al.A new strategy for the optimization of variable blank holder force in sheet metal forming[J].Journal of Plasticity Engineering，2007，14(2):102-107.

[8]肖良红，罗慧娜，向俊仲，等.基于AutoForm的轿车行李箱内板成形工艺优化[J].锻压技术，2014，39(6):60-64.

Xiao L H,Luo H N,Xiang J Z,et al. Forming process optimization for inner panel of car trunk lid based on AutoForm [J]. Forging & Stamping Technology，2014，39(6):60-64.

[9]Fratini L， Micari F. Investigation effective blank holder force paths to improve the maximum component height in deep drawing process[J]. Annals -Manufacturing Technology，1999，48(1):231-234.

[10]郭琦，游晓红.分区压边拉深工艺改善矩盒形件成形研究[J].机械设计与制造，2014,(11)：253-259.

Guo Q,You X H. Partition pressure deep drawing process to improve the study on forming rectangular box
［J］. Mechanical Design and Manufacturing，2014,(11)：253-259.

[11]胡世光.板料冷压成形原理[M].北京:国防工业出版社，1989.

Hu S G. Sheet Metal Cold Forming Principle [M]. Beijing: National Defence Industry Press，1989.

服务与反馈：

【本网站尚未开通全文下载服务】【加入收藏】